auxIOPortLastCommandedState

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "auxIOv2PortLastCommandedState",
    "OBJECT-TYPE",
    "SYNTAX",
    "Integer32",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "deprecated",
    "DESCRIPTION",
    "\"<Definition>For bi-directional ports, this object indicates the last state to which the auxIOv2PortValue object was set. For output ports, this value shall always be equal to the auxIOv2PortValue object. For input ports, this value shall always be zero (0). <Superseded by> FIELD-DEVICE-GPIO-MIB.fdGPIORequestedValue (ISO 20684-2) <Informative> The original specification defined this parameter Using INTEGER (0..4294967295); however, by convention, INTEGERs Are limited to the range (-2147483648..2147483647) in SNMPv1 and SNMPv3 enforces this limitation. Therefore, when presenting this Object in SNMPv3, it is encoded as an Unsigned32 rather than an INTEGER (0..4294967295); proxy agents will need to address this encoding change within their implementation. The replacement object in the GPIO table supports a signed 32- bit integer, thereby allowing negative output values. <Object Identifier> 1.3.6.1.4.1.1206.4.2.6.7.3.1.7\"",
    "::=",
    "{",
    "auxIOv2Entry",
    "7",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "Integer32"
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "deprecated"
    ],
    [
      "DESCRIPTION",
      "<Definition>For bi-directional ports, this object indicates the last state to which the auxIOv2PortValue object was set. For output ports, this value shall always be equal to the auxIOv2PortValue object. For input ports, this value shall always be zero (0). <Superseded by> FIELD-DEVICE-GPIO-MIB.fdGPIORequestedValue (ISO 20684-2) <Informative> The original specification defined this parameter Using INTEGER (0..4294967295); however, by convention, INTEGERs Are limited to the range (-2147483648..2147483647) in SNMPv1 and SNMPv3 enforces this limitation. Therefore, when presenting this Object in SNMPv3, it is encoded as an Unsigned32 rather than an INTEGER (0..4294967295); proxy agents will need to address this encoding change within their implementation. The replacement object in the GPIO table supports a signed 32- bit integer, thereby allowing negative output values. <Object Identifier> 1.3.6.1.4.1.1206.4.2.6.7.3.1.7"
    ],
    null,
    null,
    null,
    null
  ]
}

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "auxIOv2PortLastCommandedState",
    "OBJECT-TYPE",
    "SYNTAX",
    "Integer32",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "deprecated",
    "DESCRIPTION",
    "\"<Definition>For bi-directional ports, this object indicates the last state to which the auxIOv2PortValue object was set. For output ports, this value shall always be equal to the auxIOv2PortValue object. For input ports, this value shall always be zero (0). <Supplanted by> ISO26048-1-Srsa.fdSrsaRequestedValue (ISO 26048-1) <Informative> The original specification defined this parameter Using INTEGER (0..4294967295); however, by convention, INTEGERs Are limited to the range (-2147483648..2147483647) in SNMPv1 and SNMPv3 enforces this limitation. Therefore, when presenting this Object in SNMPv3, it is encoded as an Unsigned32 rather than an INTEGER (0..4294967295); proxy agents will need to address this encoding change within their implementation. The replacement object in the GPIO table supports a signed 32- bit integer, thereby allowing negative output values. <Object Identifier> 1.3.6.1.4.1.1206.4.2.6.7.3.1.7\"",
    "::=",
    "{",
    "auxIOv2Entry",
    "7",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "Integer32"
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "deprecated"
    ],
    [
      "DESCRIPTION",
      "<Definition>For bi-directional ports, this object indicates the last state to which the auxIOv2PortValue object was set. For output ports, this value shall always be equal to the auxIOv2PortValue object. For input ports, this value shall always be zero (0). <Supplanted by> ISO26048-1-Srsa.fdSrsaRequestedValue (ISO 26048-1) <Informative> The original specification defined this parameter Using INTEGER (0..4294967295); however, by convention, INTEGERs Are limited to the range (-2147483648..2147483647) in SNMPv1 and SNMPv3 enforces this limitation. Therefore, when presenting this Object in SNMPv3, it is encoded as an Unsigned32 rather than an INTEGER (0..4294967295); proxy agents will need to address this encoding change within their implementation. The replacement object in the GPIO table supports a signed 32- bit integer, thereby allowing negative output values. <Object Identifier> 1.3.6.1.4.1.1206.4.2.6.7.3.1.7"
    ],
    null,
    null,
    null,
    null
  ]
}

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "auxIOPortLastCommandedState",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "4294967295",
    ")",
    "ACCESS",
    "read-only",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition>For bi-directional ports, this object shall indicate the last state to which the auxIOPortValue object was set. For output ports, this value shall always be equal to the auxIOPortValue object. For input ports, this value shall always be zero (0). <DescriptiveName>AuxIOPort.lastCommandedState:number <DataConceptType>Data Element\"",
    "::=",
    "{",
    "auxIOEntry",
    "7",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            4294967295
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition>For bi-directional ports, this object shall indicate the last state to which the auxIOPortValue object was set. For output ports, this value shall always be equal to the auxIOPortValue object. For input ports, this value shall always be zero (0). <DescriptiveName>AuxIOPort.lastCommandedState:number <DataConceptType>Data Element"
    ],
    null,
    null,
    null,
    null
  ]
}

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "auxIOv2PortLastCommandedState",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "4294967295",
    ")",
    "ACCESS",
    "read-only",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition>For bi-directional ports, this object indicates the last state to which the auxIOv2PortValue object was set. For output ports, this value shall always be equal to the auxIOv2PortValue object. For input ports, this value shall always be zero (0). <Object Identifier> 1.3.6.1.4.1.1206.4.2.6.7.3.1.7\"",
    "::=",
    "{",
    "auxIOv2Entry",
    "7",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            4294967295
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition>For bi-directional ports, this object indicates the last state to which the auxIOv2PortValue object was set. For output ports, this value shall always be equal to the auxIOv2PortValue object. For input ports, this value shall always be zero (0). <Object Identifier> 1.3.6.1.4.1.1206.4.2.6.7.3.1.7"
    ],
    null,
    null,
    null,
    null
  ]
}