Indicates whether the device is a physical device
(level 0) or a logical device (level 1, level 2, etc).
It also gives its level in the containment hierarchy of
devices.
A device is a logical device if it contains other
SCSI devices, otherwise it is a physical device.
A level 1 array contains only physical devices as its
members; a level 2 device has at least one
level 1 array as a member; and so on.
In the case of HBA with no RAID capabilities, the only
applicable device level is 0.
Parsed from file Dpt.mib.txt
Company: None
Module: DPT-SCSI-MIB
Indicates the Level of the device.
Level 0 indicates physical devices, while level 1 and 2
indicate logical devices. It also gives its level in the
containment hierarchy of devices.
A device is a logical device if it contains other
SCSI devices, otherwise it is a physical device.
A level 1 array contains only physical devices as its
members; a level 2 device has at least one
level 1 array as a member. A level 2 device would be
a RAID-10 or RAID-50 logical drive.
Parsed from file DPT-SCSI-MIB.mib
Module: DPT-SCSI-MIB
Vendor: Distributed Processing Technology
Module: DPT-SCSI-MIB
[Automatically extracted from oidview.com]
dptScsiDevLevel OBJECT-TYPE SYNTAX INTEGER (0..2) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the device is a physical device (level 0) or a logical device (level 1, level 2, etc). It also gives its level in the containment hierarchy of devices. A device is a logical device if it contains other SCSI devices, otherwise it is a physical device. A level 1 array contains only physical devices as its members; a level 2 device has at least one level 1 array as a member; and so on. In the case of HBA with no RAID capabilities, the only applicable device level is 0." ::= { dptScsiDevEntry 3 }
dptScsiDevLevel OBJECT-TYPE SYNTAX INTEGER (0..2) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the Level of the device. Level 0 indicates physical devices, while level 1 and 2 indicate logical devices. It also gives its level in the containment hierarchy of devices. A device is a logical device if it contains other SCSI devices, otherwise it is a physical device. A level 1 array contains only physical devices as its members; a level 2 device has at least one level 1 array as a member. A level 2 device would be a RAID-10 or RAID-50 logical drive." ::= { dptScsiDevEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1597.1.4.1.1.1 | dptScsiDevId | 0 | 0 | The SCSI Id of the device. |
| 1.3.6.1.4.1.1597.1.4.1.1.2 | dptScsiDevLun | 0 | 0 | The SCSI logical unit number of the device. |
| 1.3.6.1.4.1.1597.1.4.1.1.4 | dptScsiDevVendor | 0 | 0 | The name of the vendor of the device. |
| 1.3.6.1.4.1.1597.1.4.1.1.5 | dptScsiDevModel | 0 | 0 | The model name of the device. |
| 1.3.6.1.4.1.1597.1.4.1.1.6 | dptScsiDevRevision | 0 | 0 | The revision level of the device. |
| 1.3.6.1.4.1.1597.1.4.1.1.7 | dptScsiDevSerialNumber | 0 | 0 | The serial number of the device. |
| 1.3.6.1.4.1.1597.1.4.1.1.8 | dptScsiDevStatus | 0 | 0 | The administrative state of the device. The following are all the possible values: invalid - current value is invalid. optim… |
| 1.3.6.1.4.1.1597.1.4.1.1.9 | dptScsiDevBusWidth | 0 | 0 | The data width of the SCSI device. |
| 1.3.6.1.4.1.1597.1.4.1.1.10 | dptScsiDevCapacity | 0 | 0 | The storage capacity of the device in MB. |
| 1.3.6.1.4.1.1597.1.4.1.1.11 | dptScsiDevLogicalBlockSize | 0 | 0 | Logical block size of the device in bytes. |
| 1.3.6.1.4.1.1597.1.4.1.1.12 | dptScsiDevPhysicalBlockSize | 0 | 0 | Physical block size of the device in bytes. |
| 1.3.6.1.4.1.1597.1.4.1.1.13 | dptScsiDevNegTransferRate, dptScsiDevMaxTransferRate | 0 | 0 | The maximum data transfer rate of the device in MB/s. |
| 1.3.6.1.4.1.1597.1.4.1.1.14 | dptScsiDevRemovable | 0 | 0 | Indicates whether or not the device is removable. |
| 1.3.6.1.4.1.1597.1.4.1.1.15 | dptScsiDevEccEnabled | 0 | 0 | Indicates whether the device has ECC enabled or disabled. |
| 1.3.6.1.4.1.1597.1.4.1.1.16 | dptScsiDevScsiVersion | 0 | 0 | Indicates the SCSI specification version of the device. |
| 1.3.6.1.4.1.1597.1.4.1.1.17 | dptScsiDevSoftReset | 0 | 0 | Indicates whether the device supports soft reset. |
| 1.3.6.1.4.1.1597.1.4.1.1.18 | dptScsiDevCmdQueuing | 0 | 0 | Indicates whether the device is supports command queuing. |
| 1.3.6.1.4.1.1597.1.4.1.1.19 | dptScsiDevLinkedCmds | 0 | 0 | Indicates whether the device is linked commands capable. |
| 1.3.6.1.4.1.1597.1.4.1.1.20 | dptScsiDevSynchronous | 0 | 0 | Indicates whether the device supports synchronous data transfers. |
| 1.3.6.1.4.1.1597.1.4.1.1.21 | dptScsiDevRelAddr | 0 | 0 | Indicates whether the device supports relative addressing. |
| 1.3.6.1.4.1.1597.1.4.1.1.22 | dptScsiDevSMART | 0 | 0 | Indicates whether the device supports SMART specifications. |
| 1.3.6.1.4.1.1597.1.4.1.1.23 | dptScsiDevSCAM | 0 | 0 | Indicates whether the device supports SCAM. |
| 1.3.6.1.4.1.1597.1.4.1.1.24 | dptScsiDevBadBlockNumber | 0 | 0 | If bad blocks have been detected on the device, this is the address of the most recent one. Otherwise it will contain 0 (no error… |
| 1.3.6.1.4.1.1597.1.4.1.1.25 | dptScsiDevBadBlockCount | 0 | 0 | This represents the total number of the bad blocks encountered most recently on the device starting at the block number dptScsiDe… |
| 1.3.6.1.4.1.1597.1.4.1.1.26 | dptScsiDevErrorsAboveThreshold | 0 | 0 | Indicates whether or not the error count of the device has reached the threshold. |
| 1.3.6.1.4.1.1597.1.4.1.1.27 | dptScsiDevDriveLockingOn | 0 | 0 | Indicates whether or not the drive is locked. |
| 1.3.6.1.4.1.1597.1.4.1.1.28 | dptScsiDevLastReqSenseInfo | 0 | 0 | The request sense information. It is used in the definition of one or more traps. |
| 1.3.6.1.4.1.1597.1.4.1.1.29 | dptScsiDevReadCachingOn | 0 | 0 | Indicates whether or not read caching is on. |
| 1.3.6.1.4.1.1597.1.4.1.1.30 | dptScsiDevReadCacheMaxRecord | 0 | 0 | Maximum record size for read caching. |
| 1.3.6.1.4.1.1597.1.4.1.1.31 | dptScsiDevWriteCachingOn | 0 | 0 | Indicates whether or not write caching is on. |
| 1.3.6.1.4.1.1597.1.4.1.1.32 | dptScsiDevWriteCacheMaxRecord | 0 | 0 | Maximum record size for write caching. |
| 1.3.6.1.4.1.1597.1.4.1.1.33 | dptScsiDevWriteMode | 0 | 0 | The write modes are Write-back and Write-through, with write-back being the default. In write-back mode the controller will cache… |
| 1.3.6.1.4.1.1597.1.4.1.1.34 | dptScsiDevSmartStatusOk | 0 | 0 | Indicates whether the device has reported a SMART error not (not applicable to logical devices). |
| 1.3.6.1.4.1.1597.1.4.1.1.35 | dptScsiDevType | 0 | 0 | Type of device reported. |