The administrative state of the device. The following are
all the possible values:
invalid - current value is invalid.
optimal - device is fully functional and is not
running diagnostics that may impact
performance.
(An SNMP set with the value optimal forces
the device to optimal status provided
it is a member of an array.)
verifying - diagnostics being run on the device.
Performance of the device may be affected.
failed - catastrophic failure has occurred.
(An SNMP set with the value failed forces
the device to failed status provided
it is a member of an array.)
Warning - user-specified error threshold has been
crossed. Device failure may be imminent.
(An SNMP set with the value warning forces
the device to warning status provided
it is a member of an array.)
formatting - device is being formatted.
(An SNMP set with the value formatting
causes formatting of the device.)
formatCertifying
- a SCSI format with certify command in
progress.
(An SNMP set with the value 'formatCertifying'
causes a SCSI format with certify command
to be issued to the device.)
missing - device is physically missing or does
not respond to commands on the SCSI bus.
notCreated - array has been built by the user but the
changes are yet to be committed to the
hardware.
degraded - redundant array has one of the members
failed causing the array to function at
a degraded performance.
building - array is in the process of building.
verifyFixing - device is processing an SCSI verify fix
command.
abortActivity - this value can only be set with help of
an SNMP set command. It allows user to
abort diagnostics, building of array
and other lengthy activities.
Parsed from file Dpt.mib.txt
Company: None
Module: DPT-SCSI-MIB
The administrative state of the device. The following are
all the possible values:
invalid - current value is invalid.
optimal - device is fully functional and is not
running diagnostics that may impact
performance.
verifying - diagnostics are being run on the device.
Performance of the device may be affected.
failed - catastrophic failure has occurred.
warning - user-specified error threshold has been
crossed. Device failure may be imminent.
formatting - device is being formatted.
formatCertifying
- a SCSI format with certify command in
progress.
missing - device is physically missing or does
not respond to commands on the SCSI bus.
notCreated - array has been defined by the user but the
changes are have not been committed to the
hardware.
degraded - redundant array has a failed component
which results in degraded performance and
loss of fault-tolerance.
building - array is in the process of building.
verifyFixing - device is processing an SCSI verify fix
command.
abortActivity - this value allows the user to abort any
background tasks on the controller, such
as Build, Rebuild and Verify.
Parsed from file DPT-SCSI-MIB.mib
Module: DPT-SCSI-MIB
Vendor: Distributed Processing Technology
Module: DPT-SCSI-MIB
[Automatically extracted from oidview.com]
dptScsiDevStatus OBJECT-TYPE SYNTAX DeviceStatus ACCESS read-only STATUS mandatory DESCRIPTION "The administrative state of the device. The following are all the possible values: invalid - current value is invalid. optimal - device is fully functional and is not running diagnostics that may impact performance. (An SNMP set with the value optimal forces the device to optimal status provided it is a member of an array.) verifying - diagnostics being run on the device. Performance of the device may be affected. failed - catastrophic failure has occurred. (An SNMP set with the value failed forces the device to failed status provided it is a member of an array.) Warning - user-specified error threshold has been crossed. Device failure may be imminent. (An SNMP set with the value warning forces the device to warning status provided it is a member of an array.) formatting - device is being formatted. (An SNMP set with the value formatting causes formatting of the device.) formatCertifying - a SCSI format with certify command in progress. (An SNMP set with the value 'formatCertifying' causes a SCSI format with certify command to be issued to the device.) missing - device is physically missing or does not respond to commands on the SCSI bus. notCreated - array has been built by the user but the changes are yet to be committed to the hardware. degraded - redundant array has one of the members failed causing the array to function at a degraded performance. building - array is in the process of building. verifyFixing - device is processing an SCSI verify fix command. abortActivity - this value can only be set with help of an SNMP set command. It allows user to abort diagnostics, building of array and other lengthy activities." ::= { dptScsiDevEntry 8 }
dptScsiDevStatus OBJECT-TYPE SYNTAX DeviceStatus ACCESS read-only STATUS mandatory DESCRIPTION "The administrative state of the device. The following are all the possible values: invalid - current value is invalid. optimal - device is fully functional and is not running diagnostics that may impact performance. verifying - diagnostics are being run on the device. Performance of the device may be affected. failed - catastrophic failure has occurred. warning - user-specified error threshold has been crossed. Device failure may be imminent. formatting - device is being formatted. formatCertifying - a SCSI format with certify command in progress. missing - device is physically missing or does not respond to commands on the SCSI bus. notCreated - array has been defined by the user but the changes are have not been committed to the hardware. degraded - redundant array has a failed component which results in degraded performance and loss of fault-tolerance. building - array is in the process of building. verifyFixing - device is processing an SCSI verify fix command. abortActivity - this value allows the user to abort any background tasks on the controller, such as Build, Rebuild and Verify." ::= { dptScsiDevEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1597.1.4.1.1.1 | dptScsiDevId | 0 | 0 | The SCSI Id of the device. |
| 1.3.6.1.4.1.1597.1.4.1.1.2 | dptScsiDevLun | 0 | 0 | The SCSI logical unit number of the device. |
| 1.3.6.1.4.1.1597.1.4.1.1.3 | dptScsiDevLevel | 0 | 0 | Indicates the Level of the device. Level 0 indicates physical devices, while level 1 and 2 indicate logical devices. It also give… |
| 1.3.6.1.4.1.1597.1.4.1.1.4 | dptScsiDevVendor | 0 | 0 | The name of the vendor of the device. |
| 1.3.6.1.4.1.1597.1.4.1.1.5 | dptScsiDevModel | 0 | 0 | The model name of the device. |
| 1.3.6.1.4.1.1597.1.4.1.1.6 | dptScsiDevRevision | 0 | 0 | The revision level of the device. |
| 1.3.6.1.4.1.1597.1.4.1.1.7 | dptScsiDevSerialNumber | 0 | 0 | The serial number of the device. |
| 1.3.6.1.4.1.1597.1.4.1.1.9 | dptScsiDevBusWidth | 0 | 0 | The data width of the SCSI device. |
| 1.3.6.1.4.1.1597.1.4.1.1.10 | dptScsiDevCapacity | 0 | 0 | The storage capacity of the device in MB. |
| 1.3.6.1.4.1.1597.1.4.1.1.11 | dptScsiDevLogicalBlockSize | 0 | 0 | Logical block size of the device in bytes. |
| 1.3.6.1.4.1.1597.1.4.1.1.12 | dptScsiDevPhysicalBlockSize | 0 | 0 | Physical block size of the device in bytes. |
| 1.3.6.1.4.1.1597.1.4.1.1.13 | dptScsiDevNegTransferRate, dptScsiDevMaxTransferRate | 0 | 0 | The maximum data transfer rate of the device in MB/s. |
| 1.3.6.1.4.1.1597.1.4.1.1.14 | dptScsiDevRemovable | 0 | 0 | Indicates whether or not the device is removable. |
| 1.3.6.1.4.1.1597.1.4.1.1.15 | dptScsiDevEccEnabled | 0 | 0 | Indicates whether the device has ECC enabled or disabled. |
| 1.3.6.1.4.1.1597.1.4.1.1.16 | dptScsiDevScsiVersion | 0 | 0 | Indicates the SCSI specification version of the device. |
| 1.3.6.1.4.1.1597.1.4.1.1.17 | dptScsiDevSoftReset | 0 | 0 | Indicates whether the device supports soft reset. |
| 1.3.6.1.4.1.1597.1.4.1.1.18 | dptScsiDevCmdQueuing | 0 | 0 | Indicates whether the device is supports command queuing. |
| 1.3.6.1.4.1.1597.1.4.1.1.19 | dptScsiDevLinkedCmds | 0 | 0 | Indicates whether the device is linked commands capable. |
| 1.3.6.1.4.1.1597.1.4.1.1.20 | dptScsiDevSynchronous | 0 | 0 | Indicates whether the device supports synchronous data transfers. |
| 1.3.6.1.4.1.1597.1.4.1.1.21 | dptScsiDevRelAddr | 0 | 0 | Indicates whether the device supports relative addressing. |
| 1.3.6.1.4.1.1597.1.4.1.1.22 | dptScsiDevSMART | 0 | 0 | Indicates whether the device supports SMART specifications. |
| 1.3.6.1.4.1.1597.1.4.1.1.23 | dptScsiDevSCAM | 0 | 0 | Indicates whether the device supports SCAM. |
| 1.3.6.1.4.1.1597.1.4.1.1.24 | dptScsiDevBadBlockNumber | 0 | 0 | If bad blocks have been detected on the device, this is the address of the most recent one. Otherwise it will contain 0 (no error… |
| 1.3.6.1.4.1.1597.1.4.1.1.25 | dptScsiDevBadBlockCount | 0 | 0 | This represents the total number of the bad blocks encountered most recently on the device starting at the block number dptScsiDe… |
| 1.3.6.1.4.1.1597.1.4.1.1.26 | dptScsiDevErrorsAboveThreshold | 0 | 0 | Indicates whether or not the error count of the device has reached the threshold. |
| 1.3.6.1.4.1.1597.1.4.1.1.27 | dptScsiDevDriveLockingOn | 0 | 0 | Indicates whether or not the drive is locked. |
| 1.3.6.1.4.1.1597.1.4.1.1.28 | dptScsiDevLastReqSenseInfo | 0 | 0 | The request sense information. It is used in the definition of one or more traps. |
| 1.3.6.1.4.1.1597.1.4.1.1.29 | dptScsiDevReadCachingOn | 0 | 0 | Indicates whether or not read caching is on. |
| 1.3.6.1.4.1.1597.1.4.1.1.30 | dptScsiDevReadCacheMaxRecord | 0 | 0 | Maximum record size for read caching. |
| 1.3.6.1.4.1.1597.1.4.1.1.31 | dptScsiDevWriteCachingOn | 0 | 0 | Indicates whether or not write caching is on. |
| 1.3.6.1.4.1.1597.1.4.1.1.32 | dptScsiDevWriteCacheMaxRecord | 0 | 0 | Maximum record size for write caching. |
| 1.3.6.1.4.1.1597.1.4.1.1.33 | dptScsiDevWriteMode | 0 | 0 | The write modes are Write-back and Write-through, with write-back being the default. In write-back mode the controller will cache… |
| 1.3.6.1.4.1.1597.1.4.1.1.34 | dptScsiDevSmartStatusOk | 0 | 0 | Indicates whether the device has reported a SMART error not (not applicable to logical devices). |
| 1.3.6.1.4.1.1597.1.4.1.1.35 | dptScsiDevType | 0 | 0 | Type of device reported. |