Description 1
The IP subnet mask for Source IP address. This field is read-only and copy from it's Profile setting.
Sources for this description
D-Link MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.171.10.76.32.1.15.3.1.1.10
The IP subnet mask for Source IP address. This field is read-only and copy from it's Profile setting.
Identification
{1 3 6 1 4 1 171 10 76 32 1 15 3 1 1 10}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | enabled | 2 |
| 2 | disabled | 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In DGS-1210-10_CX, the row index consists of these components in order:
aclL3v4RuleProfileNo (Integer32): one numeric subidentifier for the non-negative value.aclL3v4RuleAccessID (Integer32): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.171.10.76.32.1.15.3.1.1.10.<aclL3v4RuleProfileNo>.<aclL3v4RuleAccessID>. Use values present on the device and permitted by its MIB. Other definitions can differ.
Published row index variants: aclL3RuleProfileNo, aclL3RuleAccessID; aclL3v4RuleProfileNo, aclL3v4RuleAccessID.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.10.76.32.1.15.3.1.1.10
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
aclL3RuleSrcIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP subnet mask for Source IP address.
This field is read-only and copy from it's Profile setting.
"
DEFVAL { 'FFFFFFFF'h }
::= { aclL3RuleEntry 10 }aclL3v4RuleReplacePriority OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable this option and manually enter the replacement value used
to re-write the 802.1p user priority value entered in the Priority
field, which meets the criteria specified previously in this command,
before forwarding it on to the specified CoS queue. Otherwise, a packet
will have its incoming 802.1p user priority re-written to its original
value before being forwarded by the Switch."
DEFVAL { disabled }
::= { aclL3v4RuleEntry 10 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The IP subnet mask for Source IP address. This field is read-only and copy from it's Profile setting.
D-Link MIB copies (LibreNMS/Observium Community)
Description 2
Enable this option and manually enter the replacement value used to re-write the 802.1p user priority value entered in the Priority field, which meets the criteria specified previously in this command, before forwarding it on to the specified CoS queue. Otherwise, a packet will have its incoming 802.1p user priority re-written to its original value before being forwarded by the Switch.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: aclL3RuleSrcIpAddrMask
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"aclL3RuleSrcIpAddrMask",
"OBJECT-TYPE",
"SYNTAX",
"IpAddress",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The IP subnet mask for Source IP address. This field is read-only and copy from it's Profile setting. \"",
"DEFVAL",
"{",
"'",
"FFFFFFFF",
"'",
"h",
"}",
"::=",
"{",
"aclL3RuleEntry",
"10",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"IpAddress",
null
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The IP subnet mask for Source IP address. This field is read-only and copy from it's Profile setting."
],
null,
null,
null,
[
"DEFVAL",
"'FFFFFFFF'h"
]
]
}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DGS-1210-10ME_AX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Related source files and packages:
Status in source: current.
Names: aclL3v4RuleReplacePriority
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"aclL3v4RuleReplacePriority",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Enable this option and manually enter the replacement value used to re-write the 802.1p user priority value entered in the Priority field, which meets the criteria specified previously in this command, before forwarding it on to the specified CoS queue. Otherwise, a packet will have its incoming 802.1p user priority re-written to its original value before being forwarded by the Switch.\"",
"DEFVAL",
"{",
"disabled",
"}",
"::=",
"{",
"aclL3v4RuleEntry",
"10",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Enable this option and manually enter the replacement value used to re-write the 802.1p user priority value entered in the Priority field, which meets the criteria specified previously in this command, before forwarding it on to the specified CoS queue. Otherwise, a packet will have its incoming 802.1p user priority re-written to its original value before being forwarded by the Switch."
],
null,
null,
null,
[
"DEFVAL",
"disabled"
]
]
}Module: DGS-1210-10_CX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Registration