Description 1
The type of protocol to be checked against the packet.
Sources for this description
D-Link MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.171.10.76.32.1.15.3.1.1.3
The type of protocol to be checked against the packet.
Identification
{1 3 6 1 4 1 171 10 76 32 1 15 3 1 1 3}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | icmp | 1 |
| 2 | igmp | 1 |
| 6 | tcp | 1 |
| 17 | udp | 1 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In DGS-1210-10_CX, the row index consists of these components in order:
aclL3v4RuleProfileNo (Integer32): one numeric subidentifier for the non-negative value.aclL3v4RuleAccessID (Integer32): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.171.10.76.32.1.15.3.1.1.3.<aclL3v4RuleProfileNo>.<aclL3v4RuleAccessID>. Use values present on the device and permitted by its MIB. Other definitions can differ.
Published row index variants: aclL3RuleProfileNo, aclL3RuleAccessID; aclL3v4RuleProfileNo, aclL3v4RuleAccessID.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.10.76.32.1.15.3.1.1.3
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
aclL3RuleProtocol OBJECT-TYPE
SYNTAX INTEGER {
icmp(1),
igmp(2),
tcp(6),
udp(17)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The type of protocol to be checked against the packet."
::= { aclL3RuleEntry 3 }aclL3v4RuleDstIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition."
DEFVAL { '00000000'h }
::= { aclL3v4RuleEntry 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The type of protocol to be checked against the packet.
D-Link MIB copies (LibreNMS/Observium Community)
Description 2
Destination IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: aclL3RuleProtocol
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"aclL3RuleProtocol",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"icmp",
"(",
"1",
")",
",",
"igmp",
"(",
"2",
")",
",",
"tcp",
"(",
"6",
")",
",",
"udp",
"(",
"17",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\" The type of protocol to be checked against the packet.\"",
"::=",
"{",
"aclL3RuleEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"icmp",
1
],
[
"igmp",
2
],
[
"tcp",
6
],
[
"udp",
17
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The type of protocol to be checked against the packet."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DGS-1210-10ME_AX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Related source files and packages:
Status in source: current.
Names: aclL3v4RuleDstIpAddr
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"aclL3v4RuleDstIpAddr",
"OBJECT-TYPE",
"SYNTAX",
"IpAddress",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Destination IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.\"",
"DEFVAL",
"{",
"'",
"00000000",
"'",
"h",
"}",
"::=",
"{",
"aclL3v4RuleEntry",
"3",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"IpAddress",
null
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Destination IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition."
],
null,
null,
null,
[
"DEFVAL",
"'00000000'h"
]
]
}Module: DGS-1210-10_CX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Registration