Description 1
Source IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
OID reference
1.3.6.1.4.1.171.10.76.32.1.15.3.1.1.4
Source IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
Identification
{1 3 6 1 4 1 171 10 76 32 1 15 3 1 1 4}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In DGS-1210-10_CX, the row index consists of these components in order:
aclL3v4RuleProfileNo (Integer32): one numeric subidentifier for the non-negative value.aclL3v4RuleAccessID (Integer32): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.171.10.76.32.1.15.3.1.1.4.<aclL3v4RuleProfileNo>.<aclL3v4RuleAccessID>. Use values present on the device and permitted by its MIB. Other definitions can differ.
Published row index variants: aclL3RuleProfileNo, aclL3RuleAccessID; aclL3v4RuleProfileNo, aclL3v4RuleAccessID.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.10.76.32.1.15.3.1.1.4
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
aclL3v4RuleSrcIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition."
DEFVAL { '00000000'h }
::= { aclL3v4RuleEntry 4 }aclL3RuleProtocolMask OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP protocol mask.
This field is read-only and copy from it's Profile setting.
It will work with the other field,aclL3RuleProtocol,
to caculate a range of IP protocol which is really care.
The value is in HEX format.
"
DEFVAL { 'FF'h }
::= { aclL3RuleEntry 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Source IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
Description 2
The IP protocol mask. This field is read-only and copy from it's Profile setting. It will work with the other field,aclL3RuleProtocol, to caculate a range of IP protocol which is really care. The value is in HEX format.
D-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: aclL3v4RuleSrcIpAddr
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"aclL3v4RuleSrcIpAddr",
"OBJECT-TYPE",
"SYNTAX",
"IpAddress",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Source IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.\"",
"DEFVAL",
"{",
"'",
"00000000",
"'",
"h",
"}",
"::=",
"{",
"aclL3v4RuleEntry",
"4",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"IpAddress",
null
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Source IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition."
],
null,
null,
null,
[
"DEFVAL",
"'00000000'h"
]
]
}Module: DGS-1210-10_CX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Status in source: current.
Names: aclL3RuleProtocolMask
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"aclL3RuleProtocolMask",
"OBJECT-TYPE",
"SYNTAX",
"OCTET",
"STRING",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The IP protocol mask. This field is read-only and copy from it's Profile setting. It will work with the other field,aclL3RuleProtocol, to caculate a range of IP protocol which is really care. The value is in HEX format. \"",
"DEFVAL",
"{",
"'",
"FF",
"'",
"h",
"}",
"::=",
"{",
"aclL3RuleEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"OCTET STRING"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The IP protocol mask. This field is read-only and copy from it's Profile setting. It will work with the other field,aclL3RuleProtocol, to caculate a range of IP protocol which is really care. The value is in HEX format."
],
null,
null,
null,
[
"DEFVAL",
"'FF'h"
]
]
}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DGS-1210-10ME_AX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Related source files and packages:
Registration