Description 1
The IP subnet mask for Destination IP address.
OID reference
1.3.6.1.4.1.171.10.76.32.1.15.3.1.1.5
The IP subnet mask for Destination IP address.
Identification
{1 3 6 1 4 1 171 10 76 32 1 15 3 1 1 5}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In DGS-1210-10_CX, the row index consists of these components in order:
aclL3v4RuleProfileNo (Integer32): one numeric subidentifier for the non-negative value.aclL3v4RuleAccessID (Integer32): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.171.10.76.32.1.15.3.1.1.5.<aclL3v4RuleProfileNo>.<aclL3v4RuleAccessID>. Use values present on the device and permitted by its MIB. Other definitions can differ.
Published row index variants: aclL3RuleProfileNo, aclL3RuleAccessID; aclL3v4RuleProfileNo, aclL3v4RuleAccessID.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.10.76.32.1.15.3.1.1.5
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
aclL3v4RuleDstIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP subnet mask for Destination IP address."
DEFVAL { 'FFFFFFFF'h }
::= { aclL3v4RuleEntry 5 }aclL3RuleICMPMessageType OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1',which means the rule don't care this
condition.
Some ICMP message types are:
echoReply(0),
destinationUnreachable(3),
sourceQuench(4),
redirect(5),
echoRequest(8),
timeExceeded(11),
parameterProblem(12),
timestampRequest(13),
timestampReply(14),
informationRequest(15),
informationReply(16),
addressMaskRequest(17),
addressMaskReply (18),
"
DEFVAL { -1 }
::= { aclL3RuleEntry 5 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The IP subnet mask for Destination IP address.
Description 2
The message type to be checked against the packet. If the message type matches with the packet, then the packet will be dropped / allowed based on the action set in aclL3RuleAction. The default value is '-1',which means the rule don't care this condition. Some ICMP message types are: echoReply(0), destinationUnreachable(3), sourceQuench(4), redirect(5), echoRequest(8), timeExceeded(11), parameterProblem(12), timestampRequest(13), timestampReply(14), informationRequest(15), informationReply(16), addressMaskRequest(17), addressMaskReply (18),
D-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: aclL3v4RuleDstIpAddrMask
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"aclL3v4RuleDstIpAddrMask",
"OBJECT-TYPE",
"SYNTAX",
"IpAddress",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The IP subnet mask for Destination IP address.\"",
"DEFVAL",
"{",
"'",
"FFFFFFFF",
"'",
"h",
"}",
"::=",
"{",
"aclL3v4RuleEntry",
"5",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"IpAddress",
null
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The IP subnet mask for Destination IP address."
],
null,
null,
null,
[
"DEFVAL",
"'FFFFFFFF'h"
]
]
}Module: DGS-1210-10_CX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Status in source: current.
Names: aclL3RuleICMPMessageType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"aclL3RuleICMPMessageType",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"1",
".",
".",
"255",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\" The message type to be checked against the packet. If the message type matches with the packet, then the packet will be dropped / allowed based on the action set in aclL3RuleAction. The default value is '-1',which means the rule don't care this condition. Some ICMP message types are: echoReply(0), destinationUnreachable(3), sourceQuench(4), redirect(5), echoRequest(8), timeExceeded(11), parameterProblem(12), timestampRequest(13), timestampReply(14), informationRequest(15), informationReply(16), addressMaskRequest(17), addressMaskReply (18), \"",
"DEFVAL",
"{",
"-",
"1",
"}",
"::=",
"{",
"aclL3RuleEntry",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-1,
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The message type to be checked against the packet. If the message type matches with the packet, then the packet will be dropped / allowed based on the action set in aclL3RuleAction. The default value is '-1',which means the rule don't care this condition. Some ICMP message types are: echoReply(0), destinationUnreachable(3), sourceQuench(4), redirect(5), echoRequest(8), timeExceeded(11), parameterProblem(12), timestampRequest(13), timestampReply(14), informationRequest(15), informationReply(16), addressMaskRequest(17), addressMaskReply (18),"
],
null,
null,
null,
[
"DEFVAL",
-1
]
]
}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DGS-1210-10ME_AX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Related source files and packages:
Registration