Disable/Enable KVM. NOTE: Change to KVM will take effect after the next restart of the MM.
Sources for this description
IBM MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.2.3.51.2.4.9.3.4.26
Disable/Enable KVM. NOTE: Change to KVM will take effect after the next restart of the MM.
Identification
{1 3 6 1 4 1 2 3 51 2 4 9 3 4 26}
| Value | Name |
|---|---|
| 0 | disabled |
| 1 | enabled |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.2.3.51.2.4.9.3.4.26.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
kvmEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable/Enable KVM.
NOTE: Change to KVM will take effect after the next
restart of the MM."
::= { tcpApplicationConfig 26 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Disable/Enable KVM. NOTE: Change to KVM will take effect after the next restart of the MM.
IBM MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: kvmEnable
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"kvmEnable",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"disabled",
"(",
"0",
")",
",",
"enabled",
"(",
"1",
")",
"}",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"Disable/Enable KVM. NOTE: Change to KVM will take effect after the next restart of the MM.\"",
"::=",
"{",
"tcpApplicationConfig",
"26",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"disabled",
0
],
[
"enabled",
1
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"Disable/Enable KVM. NOTE: Change to KVM will take effect after the next restart of the MM."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. IBM support.
Module: BLADE-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'IpAddress']}Related source files and packages:
Same file in Observium Community.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.1 | telnetInactivityTimeout | 0 | 0 | Default is 120 seconds. Value of zero is no timeout. Max value is any positive 4 bytes value. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.2 | commandModeInactivityTimeout | 0 | 0 | Default is zero means no timeout. Max value is any positive 4 bytes value. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.3 | secureCommandModeEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.4 | commandModeEnable | 0 | 0 | Disable/Enable TCP Command Mode. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.5 | slpAddrType | 0 | 0 | Set SLP address type to 0 (multicast) or 1 (broadcast). Note that when slpAddrType is set to broadast value then the multicast a… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.6 | slpMulticastAddr | 0 | 0 | Service Locator Protocol Multicast address |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.7 | slpEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.9 | telnetEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.10 | sshEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.11 | sshVersion | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.15 | sslServerEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.16 | sslClientEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.17 | ftpEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.18 | sftpEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.19 | tftpEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.20 | smashTelnetEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.21 | smashSshEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.22 | tftpCreateEmptyFile | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.23 | ftpTimeout | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.24 | rdEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.25 | rdocEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.27 | mmSshServerConfig | 3 | 8 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.28 | rpEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.50 | cimEnable | 0 | 0 |