OID reference
1.3.6.1.4.1.2.3.51.2.4.9.3.4.4
Disable/Enable TCP Command Mode.
Identification
{1 3 6 1 4 1 2 3 51 2 4 9 3 4 4}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 0 | diabled | 2 |
| 1 | enabled | 2 |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.2.3.51.2.4.9.3.4.4.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
commandModeEnable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set TCP Command Mode number of connections.
AMM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode.
A value of 0 means disabled.
NOTE: System Management Software requires this to be enabled for non-secure communication to the AMM."
::= { tcpApplicationConfig 4 }commandModeEnable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set TCP Command Mode number of connections.
MM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode.
A value of 0 means disabled."
::= { tcpApplicationConfig 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Parsed from BLADE-MIB.mib · BLADE-MIB
Source file: Download BLADE-MIB — archive MIB indexed for IBM (https://w3.ibm.com/standards ) · Publisher's file IBM (https://w3.ibm.com/standards ) archived MIB undated archived revision
Vendor MIB copy from the MibBrowser.online archive. IBM (https://w3.ibm.com/standards ) support.
Related source files and packages:
Source file: Download BLADE-MIB.mib
Description 2
Set TCP Command Mode number of connections. AMM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode. A value of 0 means disabled. NOTE: System Management Software requires this to be enabled for non-secure communication to the AMM.
IBM MIB copies (LibreNMS/Observium Community)
Description 3
Set TCP Command Mode number of connections. MM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode. A value of 0 means disabled.
IBM MIB copies (LibreNMS/Observium Community)IBM MIB copies (MibBrowser.online)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: commandModeEnable
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"commandModeEnable",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"Set TCP Command Mode number of connections. AMM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode. A value of 0 means disabled. NOTE: System Management Software requires this to be enabled for non-secure communication to the AMM.\"",
"::=",
"{",
"tcpApplicationConfig",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"Set TCP Command Mode number of connections. AMM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode. A value of 0 means disabled. NOTE: System Management Software requires this to be enabled for non-secure communication to the AMM."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. IBM support.
Module: BLADE-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'IpAddress']}Related source files and packages:
Same file in Observium Community.
Status in source: mandatory.
Names: commandModeEnable
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"commandModeEnable",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"Set TCP Command Mode number of connections. MM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode. A value of 0 means disabled.\"",
"::=",
"{",
"tcpApplicationConfig",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"Set TCP Command Mode number of connections. MM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode. A value of 0 means disabled."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. IBM support.
Module: CME-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'IpAddress']}Same file in Observium Community.
Vendor MIB copy from the MibBrowser.online archive. IBM (https://w3.ibm.com/standards ) support.
Module: CME-MIB
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'IpAddress']}Related source files and packages:
Historical records
commandModeEnable OBJECT-TYPE
SYNTAX INTEGER {
diabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable/Enable TCP Command Mode."
::= { tcpApplicationConfig 4 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.1 | telnetInactivityTimeout | 0 | 0 | Default is 120 seconds. Value of zero is no timeout. Max value is any positive 4 bytes value. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.2 | commandModeInactivityTimeout | 0 | 0 | Default is zero means no timeout. Max value is any positive 4 bytes value. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.3 | secureCommandModeEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.5 | slpAddrType | 0 | 0 | Set SLP address type to 0 (multicast) or 1 (broadcast). Note that when slpAddrType is set to broadast value then the multicast a… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.6 | slpMulticastAddr | 0 | 0 | Service Locator Protocol Multicast address |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.7 | slpEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.9 | telnetEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.10 | sshEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.11 | sshVersion | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.15 | sslServerEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.16 | sslClientEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.17 | ftpEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.18 | sftpEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.19 | tftpEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.20 | smashTelnetEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.21 | smashSshEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.22 | tftpCreateEmptyFile | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.23 | ftpTimeout | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.24 | rdEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.25 | rdocEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.26 | kvmEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.27 | mmSshServerConfig | 3 | 8 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.28 | rpEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.50 | cimEnable | 0 | 0 |