Disable/Enable telnet. NOTE: Change to telnet enable/disable will take effect immediately.
Sources for this description
IBM MIB copies (LibreNMS/Observium Community)IBM MIB copies (MibBrowser.online)
OID reference
1.3.6.1.4.1.2.3.51.2.4.9.3.4.9
Disable/Enable telnet. NOTE: Change to telnet enable/disable will take effect immediately.
Identification
{1 3 6 1 4 1 2 3 51 2 4 9 3 4 9}
| Value | Name |
|---|---|
| 0 | disabled |
| 1 | enabled |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.2.3.51.2.4.9.3.4.9.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
telnetEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disable/Enable telnet.
NOTE: Change to telnet enable/disable will take effect immediately."
::= { tcpApplicationConfig 9 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Disable/Enable telnet. NOTE: Change to telnet enable/disable will take effect immediately.
IBM MIB copies (LibreNMS/Observium Community)IBM MIB copies (MibBrowser.online)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: telnetEnable
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"telnetEnable",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"disabled",
"(",
"0",
")",
",",
"enabled",
"(",
"1",
")",
"}",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"Disable/Enable telnet. NOTE: Change to telnet enable/disable will take effect immediately.\"",
"::=",
"{",
"tcpApplicationConfig",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"disabled",
0
],
[
"enabled",
1
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"Disable/Enable telnet. NOTE: Change to telnet enable/disable will take effect immediately."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. IBM support.
Module: BLADE-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'IpAddress']}Related source files and packages:
Same file in Observium Community.
Vendor MIB copy from the LibreNMS archive. IBM support.
Module: CME-MIB
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'IpAddress']}Same file in Observium Community.
Vendor MIB copy from the MibBrowser.online archive. IBM (https://w3.ibm.com/standards ) support.
Module: CME-MIB
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'IpAddress']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.1 | telnetInactivityTimeout | 0 | 0 | Default is 120 seconds. Value of zero is no timeout. Max value is any positive 4 bytes value. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.2 | commandModeInactivityTimeout | 0 | 0 | Default is zero means no timeout. Max value is any positive 4 bytes value. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.3 | secureCommandModeEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.4 | commandModeEnable | 0 | 0 | Disable/Enable TCP Command Mode. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.5 | slpAddrType | 0 | 0 | Set SLP address type to 0 (multicast) or 1 (broadcast). Note that when slpAddrType is set to broadast value then the multicast a… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.6 | slpMulticastAddr | 0 | 0 | Service Locator Protocol Multicast address |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.7 | slpEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.10 | sshEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.11 | sshVersion | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.15 | sslServerEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.16 | sslClientEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.17 | ftpEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.18 | sftpEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.19 | tftpEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.20 | smashTelnetEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.21 | smashSshEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.22 | tftpCreateEmptyFile | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.23 | ftpTimeout | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.24 | rdEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.25 | rdocEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.26 | kvmEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.27 | mmSshServerConfig | 3 | 8 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.28 | rpEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.50 | cimEnable | 0 | 0 |