OID reference
1.3.6.1.4.1.2.3.51.2.4.9.3.4.3
Set Secure TCP Command Mode number of connections. MM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode. A value of 0 means disabled. If no valid server certificate is in place, Secure TCP Command Mode will not be allowed to set to enable.
Identification
{1 3 6 1 4 1 2 3 51 2 4 9 3 4 3}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.2.3.51.2.4.9.3.4.3.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
secureCommandModeEnable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set Secure TCP Command Mode number of connections.
MM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode.
A value of 0 means disabled.
If no valid server certificate is in place, Secure TCP Command Mode will not be allowed to set to enable."
::= { tcpApplicationConfig 3 }secureCommandModeEnable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set Secure TCP Command Mode number of connections.
AMM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode.
A value of 0 means disabled.
If no valid server certificate is in place, Secure TCP Command Mode will not be allowed to set to enable.
NOTE: System Management Software requires this to be enabled for secure communication to the AMM."
::= { tcpApplicationConfig 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Set Secure TCP Command Mode number of connections. MM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode. A value of 0 means disabled. If no valid server certificate is in place, Secure TCP Command Mode will not be allowed to set to enable.
IBM MIB copies (LibreNMS/Observium Community)IBM MIB copies (MibBrowser.online)
Description 2
Set Secure TCP Command Mode number of connections. AMM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode. A value of 0 means disabled. If no valid server certificate is in place, Secure TCP Command Mode will not be allowed to set to enable. NOTE: System Management Software requires this to be enabled for secure communication to the AMM.
IBM MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: secureCommandModeEnable
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"secureCommandModeEnable",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"Set Secure TCP Command Mode number of connections. MM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode. A value of 0 means disabled. If no valid server certificate is in place, Secure TCP Command Mode will not be allowed to set to enable.\"",
"::=",
"{",
"tcpApplicationConfig",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"Set Secure TCP Command Mode number of connections. MM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode. A value of 0 means disabled. If no valid server certificate is in place, Secure TCP Command Mode will not be allowed to set to enable."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. IBM support.
Module: CME-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'IpAddress']}Related source files and packages:
Same file in Observium Community.
Vendor MIB copy from the MibBrowser.online archive. IBM (https://w3.ibm.com/standards ) support.
Module: CME-MIB
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'IpAddress']}Related source files and packages:
Status in source: mandatory.
Names: secureCommandModeEnable
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"secureCommandModeEnable",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"Set Secure TCP Command Mode number of connections. AMM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode. A value of 0 means disabled. If no valid server certificate is in place, Secure TCP Command Mode will not be allowed to set to enable. NOTE: System Management Software requires this to be enabled for secure communication to the AMM.\"",
"::=",
"{",
"tcpApplicationConfig",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"Set Secure TCP Command Mode number of connections. AMM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode. A value of 0 means disabled. If no valid server certificate is in place, Secure TCP Command Mode will not be allowed to set to enable. NOTE: System Management Software requires this to be enabled for secure communication to the AMM."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. IBM support.
Module: BLADE-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'IpAddress']}Same file in Observium Community.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.1 | telnetInactivityTimeout | 0 | 0 | Default is 120 seconds. Value of zero is no timeout. Max value is any positive 4 bytes value. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.2 | commandModeInactivityTimeout | 0 | 0 | Default is zero means no timeout. Max value is any positive 4 bytes value. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.4 | commandModeEnable | 0 | 0 | Disable/Enable TCP Command Mode. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.5 | slpAddrType | 0 | 0 | Set SLP address type to 0 (multicast) or 1 (broadcast). Note that when slpAddrType is set to broadast value then the multicast a… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.6 | slpMulticastAddr | 0 | 0 | Service Locator Protocol Multicast address |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.7 | slpEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.9 | telnetEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.10 | sshEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.11 | sshVersion | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.15 | sslServerEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.16 | sslClientEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.17 | ftpEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.18 | sftpEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.19 | tftpEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.20 | smashTelnetEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.21 | smashSshEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.22 | tftpCreateEmptyFile | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.23 | ftpTimeout | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.24 | rdEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.25 | rdocEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.26 | kvmEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.27 | mmSshServerConfig | 3 | 8 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.28 | rpEnable | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.50 | cimEnable | 0 | 0 |