Switch interface bit map that overrides all other control
mechanisms for action taken with all frames received on this
switch interface. When a bit in this bit map is set for a
particular switch interface, all frames received are forwarded
to that switch interface. When a bit in this bit map is not
set, the frames are forwarded or filtered based on other control
mechanisms. This allows all packets including error packets to
be forwarded. Note that the Big Endian format is used in the
bit map representation. This means that the most significant
bit represents the 1st interface. Default is 0x0000. DURABLE.
Parsed from file Compaq-Fp100.mib.txt
Company: compaq
Module: COMPAQ-FastPipes100-MIB
fp100IfMonitorBitMap OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-write STATUS mandatory DESCRIPTION "Switch interface bit map that overrides all other control mechanisms for action taken with all frames received on this switch interface. When a bit in this bit map is set for a particular switch interface, all frames received are forwarded to that switch interface. When a bit in this bit map is not set, the frames are forwarded or filtered based on other control mechanisms. This allows all packets including error packets to be forwarded. Note that the Big Endian format is used in the bit map representation. This means that the most significant bit represents the 1st interface. Default is 0x0000. DURABLE." ::= { fp100IfStatusEntry 14 }
Vendor: Compaq
Module: COMPAQ-FastPipes100-MIB (Compaq-Fp100.mib)
Type: TABULAR
Access: read-write
Syntax: OCTET STRING
( SIZE (
2 ) )
Automatically extracted from www.mibdepot.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.101.2.1.10.1.1.1 | fp100IfStatusInterface | 0 | 0 | Switch interface number for this entry. |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.2 | fp100IfStatusIfIndex | 0 | 0 | The value of the instance of the ifIndex object, defined in MIB-II, for this switch interface. |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.3 | fp100IfAdminStatus | 0 | 0 | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed sy… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.4 | fp100IfOperStatus | 0 | 0 | The current operational state of the switch interface. |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.5 | fp100IfDetailedStatus | 0 | 0 | The current operational state of the switch interface. |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.6 | fp100IfResetStatus | 0 | 0 | This object will allow the user to physically reset an interface on the FastPipes100. The advantage over a general reset is that… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.7 | fp100IfFullDuplexStatus | 0 | 0 | Operational mode of the interface: disabled(2) or enabled(1). A status of disabled(2) means the switch interface is running in h… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.8 | fp100IfStpStatus | 0 | 0 | When enabled(1), this interface will participate in Spanning Tree activities. When disabled(2), this interface will not particip… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.9 | fp100IfProtocolSpecification | 0 | 0 | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 10… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.10 | fp100IfBridgeGroup | 0 | 0 | The switch interface's logical bridge group number. This grouping not only applies to the Spanning Tree activities, but also app… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.11 | fp100IfLearningStatus | 0 | 0 | When enabled(1), this interface can enter the learning state. When disabled(2), this interface is not allowed to enter the learn… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.12 | fp100IfAgingStatus | 0 | 0 | When enabled(1), this interface ages learned entries in the Address Filter/Forward table. When disabled(2), this interface does n… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.13 | fp100IfAgingTime | 0 | 0 | The timeout period in seconds for aging out dynamically learned forwarding information on the switch interface. If Spanning Tree … |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.15 | fp100IfUnicastSprayMap | 0 | 0 | Switch interface bit map that controls action taken with unknown unicast frames received on this switch interface. When a bit is… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.16 | fp100IfMulticastSprayMap | 0 | 0 | Switch interface bit map that controls action taken with multicast frames on this switch interface. When a bit in this bit map … |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.17 | fp100IfBroadcastSprayMap | 0 | 0 | Switch interface bit mask that controls action taken with broadcast frames on this port. When a bit in this bit map is set for … |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.18 | fp100IfBCastFilterStatus | 0 | 0 | When enabled(1), switch interface level filtering will occur based on the values of fp100IfBCastRate. If disabled(2), there is … |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.19 | fp100IfBCastRate | 0 | 0 | The rate in frames/second that broadcasts will not be allowed to exceed, when fp100IfBcastFilterEnable is true. Default is 1000 p… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.20 | fp100IfMCastFilterStatus | 0 | 0 | When enabled(1), switch interface level filtering will occur based on the values of fp100IfMCastRate. If disabled(2), there is n… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.21 | fp100IfMCastRate | 0 | 0 | The rate in frames/second that multicasts will not be allowed to exceed, when fp100IfMcastFilterEnable is true. Default is 1000 p… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.22 | fp100SBlkMajorVer | 0 | 0 | The major number of the Switching Block firmware version. For example, if the firmware version is 2.12, the value of this object… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.23 | fp100SBlkMinorVer | 0 | 0 | The minor number of the Switching Block firmware version. For example, if the firmware version is 2.12, the value of this object … |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.24 | fp100IfNumPorts | 0 | 0 | The number of ports present of the switch interface. |