When enabled(1), this interface will participate in
Spanning Tree activities. When disabled(2), this interface
will not participate in the Spanning Tree algorithm.
Default is enabled(1). DURABLE.
Parsed from file Compaq-Fp100.mib.txt
Company: compaq
Module: COMPAQ-FastPipes100-MIB
fp100IfStpStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When enabled(1), this interface will participate in Spanning Tree activities. When disabled(2), this interface will not participate in the Spanning Tree algorithm. Default is enabled(1). DURABLE." ::= { fp100IfStatusEntry 8 }
Vendor: Compaq
Module: COMPAQ-FastPipes100-MIB (Compaq-Fp100.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.101.2.1.10.1.1.1 | fp100IfStatusInterface | 0 | 0 | Switch interface number for this entry. |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.2 | fp100IfStatusIfIndex | 0 | 0 | The value of the instance of the ifIndex object, defined in MIB-II, for this switch interface. |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.3 | fp100IfAdminStatus | 0 | 0 | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed sy… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.4 | fp100IfOperStatus | 0 | 0 | The current operational state of the switch interface. |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.5 | fp100IfDetailedStatus | 0 | 0 | The current operational state of the switch interface. |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.6 | fp100IfResetStatus | 0 | 0 | This object will allow the user to physically reset an interface on the FastPipes100. The advantage over a general reset is that… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.7 | fp100IfFullDuplexStatus | 0 | 0 | Operational mode of the interface: disabled(2) or enabled(1). A status of disabled(2) means the switch interface is running in h… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.9 | fp100IfProtocolSpecification | 0 | 0 | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 10… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.10 | fp100IfBridgeGroup | 0 | 0 | The switch interface's logical bridge group number. This grouping not only applies to the Spanning Tree activities, but also app… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.11 | fp100IfLearningStatus | 0 | 0 | When enabled(1), this interface can enter the learning state. When disabled(2), this interface is not allowed to enter the learn… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.12 | fp100IfAgingStatus | 0 | 0 | When enabled(1), this interface ages learned entries in the Address Filter/Forward table. When disabled(2), this interface does n… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.13 | fp100IfAgingTime | 0 | 0 | The timeout period in seconds for aging out dynamically learned forwarding information on the switch interface. If Spanning Tree … |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.14 | fp100IfMonitorBitMap | 0 | 0 | Switch interface bit map that overrides all other control mechanisms for action taken with all frames received on this switch int… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.15 | fp100IfUnicastSprayMap | 0 | 0 | Switch interface bit map that controls action taken with unknown unicast frames received on this switch interface. When a bit is… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.16 | fp100IfMulticastSprayMap | 0 | 0 | Switch interface bit map that controls action taken with multicast frames on this switch interface. When a bit in this bit map … |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.17 | fp100IfBroadcastSprayMap | 0 | 0 | Switch interface bit mask that controls action taken with broadcast frames on this port. When a bit in this bit map is set for … |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.18 | fp100IfBCastFilterStatus | 0 | 0 | When enabled(1), switch interface level filtering will occur based on the values of fp100IfBCastRate. If disabled(2), there is … |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.19 | fp100IfBCastRate | 0 | 0 | The rate in frames/second that broadcasts will not be allowed to exceed, when fp100IfBcastFilterEnable is true. Default is 1000 p… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.20 | fp100IfMCastFilterStatus | 0 | 0 | When enabled(1), switch interface level filtering will occur based on the values of fp100IfMCastRate. If disabled(2), there is n… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.21 | fp100IfMCastRate | 0 | 0 | The rate in frames/second that multicasts will not be allowed to exceed, when fp100IfMcastFilterEnable is true. Default is 1000 p… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.22 | fp100SBlkMajorVer | 0 | 0 | The major number of the Switching Block firmware version. For example, if the firmware version is 2.12, the value of this object… |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.23 | fp100SBlkMinorVer | 0 | 0 | The minor number of the Switching Block firmware version. For example, if the firmware version is 2.12, the value of this object … |
| 1.3.6.1.4.1.232.101.2.1.10.1.1.24 | fp100IfNumPorts | 0 | 0 | The number of ports present of the switch interface. |