The operational status of the port. Setting to
enabled(1) enables the port. Setting to
disabled(2) disables the port. The value is
saved across resets and power cycles.
Parsed from file Compaq-n5708.mib.txt
Company: compaq
Module: CPQN5708-MIB
cpqn5708PortOprStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The operational status of the port. Setting to enabled(1) enables the port. Setting to disabled(2) disables the port. The value is saved across resets and power cycles." ::= { cpqn5708PortConfigEntry 2 }
Vendor: Compaq
Module: CPQN5708-MIB (Compaq-n5708.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.110.6.2.2.2.1.1 | cpqn5708PortConfigIndex | 0 | 0 | A unique value for each port entry. The value corresponds to the port number. |
| 1.3.6.1.4.1.232.110.6.2.2.2.1.3 | cpqn5708PortSwhMode | 0 | 0 | The operational processing scheme of the port. The default is in cutThrough mode. |
| 1.3.6.1.4.1.232.110.6.2.2.2.1.4 | cpqn5708PortSpeed | 0 | 0 | The operational speed of the port. Setting to ethernet(1) enables the port to operate in 10Mbps. Setting to fastEthernet(2) enabl… |
| 1.3.6.1.4.1.232.110.6.2.2.2.1.5 | cpqn5708PortDuplexState | 0 | 0 | This object indicates the current duplex operating state of the port. (1)Indicates the port is operating in half duplex mode, (2)… |
| 1.3.6.1.4.1.232.110.6.2.2.2.1.6 | cpqn5708PortLink | 0 | 0 | Indicates if link is detected on the port. |
| 1.3.6.1.4.1.232.110.6.2.2.2.1.7 | cpqn5708PortFlowCntl | 0 | 0 | (1)Enables flow control on the port, (2)Disables flow control on the port. |
| 1.3.6.1.4.1.232.110.6.2.2.2.1.8 | cpqn5708PortAgingTime | 0 | 0 | Number of seconds of inactivity before an address entity is aged out. A value of zero means no aging. Note: if an address shows u… |
| 1.3.6.1.4.1.232.110.6.2.2.2.1.9 | cpqn5708PortGrouping | 0 | 0 | None |
| 1.3.6.1.4.1.232.110.6.2.2.2.1.10 | cpqn5708PortDuplexConfig | 0 | 0 | (1)Set the port to operate in half duplex mode, (2)Set the port to operate in full duplex mode. (3)Set the port to operate in aut… |