The operational processing scheme of the port.
The default is in cutThrough mode.
Parsed from file Compaq-n5708.mib.txt
Company: compaq
Module: CPQN5708-MIB
cpqn5708PortSwhMode OBJECT-TYPE SYNTAX INTEGER { cutThrough(1), storeAndForward(2), adaptiveCutThrough(3), fragmentFree(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The operational processing scheme of the port. The default is in cutThrough mode." ::= { cpqn5708PortConfigEntry 3 }
Vendor: Compaq
Module: CPQN5708-MIB (Compaq-n5708.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.232.110.6.2.2.2.1.1 | cpqn5708PortConfigIndex | 0 | 0 | A unique value for each port entry. The value corresponds to the port number. |
1.3.6.1.4.1.232.110.6.2.2.2.1.2 | cpqn5708PortOprStatus | 0 | 0 | The operational status of the port. Setting to enabled(1) enables the port. Setting to disabled(2) disables the port. The value i… |
1.3.6.1.4.1.232.110.6.2.2.2.1.4 | cpqn5708PortSpeed | 0 | 0 | The operational speed of the port. Setting to ethernet(1) enables the port to operate in 10Mbps. Setting to fastEthernet(2) enabl… |
1.3.6.1.4.1.232.110.6.2.2.2.1.5 | cpqn5708PortDuplexState | 0 | 0 | This object indicates the current duplex operating state of the port. (1)Indicates the port is operating in half duplex mode, (2)… |
1.3.6.1.4.1.232.110.6.2.2.2.1.6 | cpqn5708PortLink | 0 | 0 | Indicates if link is detected on the port. |
1.3.6.1.4.1.232.110.6.2.2.2.1.7 | cpqn5708PortFlowCntl | 0 | 0 | (1)Enables flow control on the port, (2)Disables flow control on the port. |
1.3.6.1.4.1.232.110.6.2.2.2.1.8 | cpqn5708PortAgingTime | 0 | 0 | Number of seconds of inactivity before an address entity is aged out. A value of zero means no aging. Note: if an address shows u… |
1.3.6.1.4.1.232.110.6.2.2.2.1.9 | cpqn5708PortGrouping | 0 | 0 | None |
1.3.6.1.4.1.232.110.6.2.2.2.1.10 | cpqn5708PortDuplexConfig | 0 | 0 | (1)Set the port to operate in half duplex mode, (2)Set the port to operate in full duplex mode. (3)Set the port to operate in aut… |