cpqn5708PortGrouping OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Port grouping is a kind of virtual LAN functions. Each bit of cpqn5708PortGrouping indicates whether the port belongs to the group or not. cpqn5708 has eight group now. The relationship between bits and groups like the following figure. The value 1 indicates the port belongs to the group, the value 0 indicates the port doesn't belong to the group. Each port belongs to a group at least. So NMS can't set value 0 to this object. | byte0 | byte1 | byte2 | byte3 | | |________________ | | bit7 bit6 .... bit1 bit0 | | | | group8 group7 group2 group1 byte1,byte2,byte3 ::= { cpqn5708PortConfigEntry 9 }
Vendor: Compaq
Module: CPQN5708-MIB (Compaq-n5708.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.110.6.2.2.2.1.1 | cpqn5708PortConfigIndex | 0 | 0 | A unique value for each port entry. The value corresponds to the port number. |
| 1.3.6.1.4.1.232.110.6.2.2.2.1.2 | cpqn5708PortOprStatus | 0 | 0 | The operational status of the port. Setting to enabled(1) enables the port. Setting to disabled(2) disables the port. The value i… |
| 1.3.6.1.4.1.232.110.6.2.2.2.1.3 | cpqn5708PortSwhMode | 0 | 0 | The operational processing scheme of the port. The default is in cutThrough mode. |
| 1.3.6.1.4.1.232.110.6.2.2.2.1.4 | cpqn5708PortSpeed | 0 | 0 | The operational speed of the port. Setting to ethernet(1) enables the port to operate in 10Mbps. Setting to fastEthernet(2) enabl… |
| 1.3.6.1.4.1.232.110.6.2.2.2.1.5 | cpqn5708PortDuplexState | 0 | 0 | This object indicates the current duplex operating state of the port. (1)Indicates the port is operating in half duplex mode, (2)… |
| 1.3.6.1.4.1.232.110.6.2.2.2.1.6 | cpqn5708PortLink | 0 | 0 | Indicates if link is detected on the port. |
| 1.3.6.1.4.1.232.110.6.2.2.2.1.7 | cpqn5708PortFlowCntl | 0 | 0 | (1)Enables flow control on the port, (2)Disables flow control on the port. |
| 1.3.6.1.4.1.232.110.6.2.2.2.1.8 | cpqn5708PortAgingTime | 0 | 0 | Number of seconds of inactivity before an address entity is aged out. A value of zero means no aging. Note: if an address shows u… |
| 1.3.6.1.4.1.232.110.6.2.2.2.1.10 | cpqn5708PortDuplexConfig | 0 | 0 | (1)Set the port to operate in half duplex mode, (2)Set the port to operate in full duplex mode. (3)Set the port to operate in aut… |