The interval, in units of beacon intervals, between
successive scans during an association.
Parsed from file dot11exc.mib.txt
Company: compaq
Module: WL400-DOT11EXT-MIB
roamScanInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The interval, in units of beacon intervals, between successive scans during an association." ::= { roam 2 }
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.145.1.5.1.2.0 | roamScanInterval | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.145.1.5.1.1 | roamScanType | 1 | 1 | This object configures the type of scanning the Client uses. |
| 1.3.6.1.4.1.232.145.1.5.1.3 | roamProbeDelay | 1 | 1 | This object specifies the delay (in ms) to be used prior to transmitting a Probe frame during active scanning. The object impleme… |
| 1.3.6.1.4.1.232.145.1.5.1.4 | roamMinChannelTime | 1 | 1 | This object specifies the minimum time (in time units) to spend on each channel when scanning. The object implements the MinChann… |
| 1.3.6.1.4.1.232.145.1.5.1.5 | roamMaxChannelTime | 1 | 1 | This object specifies the maximum time (in time units) to spend on each channel when scanning. The object implements the MaxChann… |
| 1.3.6.1.4.1.232.145.1.5.1.6 | roamJoinTimeout | 1 | 1 | The firmware will keep trying to find a suitable BSS until another MLME-JOIN.request is issued. The object roamJoinTimeout allows… |
| 1.3.6.1.4.1.232.145.1.5.1.7 | roamBeaconPeriodTimeout | 1 | 1 | The time limit, in units of beacon intervals, after which the association is voided if no beacons are received. |
| 1.3.6.1.4.1.232.145.1.5.1.8 | roamDontSwitch | 1 | 1 | The time limit, in units of beacon intervals, during which the Client will not use BSS quality parameters for making the roaming … |
| 1.3.6.1.4.1.232.145.1.5.1.9 | roamBlackout | 1 | 1 | The time, in units of beacon intervals, during which the BSS is not considered candidate after the association was denied or void… |
| 1.3.6.1.4.1.232.145.1.5.1.10 | roamDisassociateTime | 1 | 1 | The time, in units of beacon intervals, taken by the Disassociate procedure. |
| 1.3.6.1.4.1.232.145.1.5.1.11 | roamHandoffTime | 1 | 1 | roamHandofftime |
| 1.3.6.1.4.1.232.145.1.5.1.12 | roamWeightMetric1 | 1 | 1 | A metric used to make roaming decisions. |
| 1.3.6.1.4.1.232.145.1.5.1.13 | roamWeightMetric2 | 1 | 1 | A metric used to make roaming decisions. |
| 1.3.6.1.4.1.232.145.1.5.1.14 | roamWeightMetric3 | 1 | 1 | A metric used to make roaming decisions. |
| 1.3.6.1.4.1.232.145.1.5.1.15 | roamWeightMetric4 | 1 | 1 | A metric used to make roaming decisions. |
| 1.3.6.1.4.1.232.145.1.5.1.16 | roamWeightMetric5 | 1 | 1 | A metric used to make roaming decisions. |
| 1.3.6.1.4.1.232.145.1.5.1.17 | roamWeightMetric6 | 1 | 1 | A metric used to make roaming decisions. |
| 1.3.6.1.4.1.232.145.1.5.1.18 | roamWeightMetric7 | 1 | 1 | A metric used to make roaming decisions. |
| 1.3.6.1.4.1.232.145.1.5.1.19 | roamWeightMetric8 | 1 | 1 | A metric used to make roaming decisions. |
| 1.3.6.1.4.1.232.145.1.5.1.20 | roamMisc1 | 1 | 1 | A misc roaming value. |
| 1.3.6.1.4.1.232.145.1.5.1.21 | roamMisc2 | 1 | 1 | A misc roaming value. |
| 1.3.6.1.4.1.232.145.1.5.1.22 | roamTableLength | 1 | 1 | This object specifies the maximum number of entries the roamTable can hold. |
| 1.3.6.1.4.1.232.145.1.5.1.23 | roamTable | 1 | 14 | The Roaming table contains all the BSSs the Client is aware of. An entry in the roamTable is only valid if the roamBSSID object o… |