The time limit, in units of beacon intervals, during which
the Client will not use BSS quality parameters for making
the roaming decissions if it becomes associated with an
Access Point.
Parsed from file dot11exc.mib.txt
Company: compaq
Module: WL400-DOT11EXT-MIB
roamDontSwitch OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The time limit, in units of beacon intervals, during which the Client will not use BSS quality parameters for making the roaming decissions if it becomes associated with an Access Point." ::= { roam 8 }
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.145.1.5.1.8.0 | roamDontSwitch | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.145.1.5.1.1 | roamScanType | 1 | 1 | This object configures the type of scanning the Client uses. |
| 1.3.6.1.4.1.232.145.1.5.1.2 | roamScanInterval | 1 | 1 | The interval, in units of beacon intervals, between successive scans during an association. |
| 1.3.6.1.4.1.232.145.1.5.1.3 | roamProbeDelay | 1 | 1 | This object specifies the delay (in ms) to be used prior to transmitting a Probe frame during active scanning. The object impleme… |
| 1.3.6.1.4.1.232.145.1.5.1.4 | roamMinChannelTime | 1 | 1 | This object specifies the minimum time (in time units) to spend on each channel when scanning. The object implements the MinChann… |
| 1.3.6.1.4.1.232.145.1.5.1.5 | roamMaxChannelTime | 1 | 1 | This object specifies the maximum time (in time units) to spend on each channel when scanning. The object implements the MaxChann… |
| 1.3.6.1.4.1.232.145.1.5.1.6 | roamJoinTimeout | 1 | 1 | The firmware will keep trying to find a suitable BSS until another MLME-JOIN.request is issued. The object roamJoinTimeout allows… |
| 1.3.6.1.4.1.232.145.1.5.1.7 | roamBeaconPeriodTimeout | 1 | 1 | The time limit, in units of beacon intervals, after which the association is voided if no beacons are received. |
| 1.3.6.1.4.1.232.145.1.5.1.9 | roamBlackout | 1 | 1 | The time, in units of beacon intervals, during which the BSS is not considered candidate after the association was denied or void… |
| 1.3.6.1.4.1.232.145.1.5.1.10 | roamDisassociateTime | 1 | 1 | The time, in units of beacon intervals, taken by the Disassociate procedure. |
| 1.3.6.1.4.1.232.145.1.5.1.11 | roamHandoffTime | 1 | 1 | roamHandofftime |
| 1.3.6.1.4.1.232.145.1.5.1.12 | roamWeightMetric1 | 1 | 1 | A metric used to make roaming decisions. |
| 1.3.6.1.4.1.232.145.1.5.1.13 | roamWeightMetric2 | 1 | 1 | A metric used to make roaming decisions. |
| 1.3.6.1.4.1.232.145.1.5.1.14 | roamWeightMetric3 | 1 | 1 | A metric used to make roaming decisions. |
| 1.3.6.1.4.1.232.145.1.5.1.15 | roamWeightMetric4 | 1 | 1 | A metric used to make roaming decisions. |
| 1.3.6.1.4.1.232.145.1.5.1.16 | roamWeightMetric5 | 1 | 1 | A metric used to make roaming decisions. |
| 1.3.6.1.4.1.232.145.1.5.1.17 | roamWeightMetric6 | 1 | 1 | A metric used to make roaming decisions. |
| 1.3.6.1.4.1.232.145.1.5.1.18 | roamWeightMetric7 | 1 | 1 | A metric used to make roaming decisions. |
| 1.3.6.1.4.1.232.145.1.5.1.19 | roamWeightMetric8 | 1 | 1 | A metric used to make roaming decisions. |
| 1.3.6.1.4.1.232.145.1.5.1.20 | roamMisc1 | 1 | 1 | A misc roaming value. |
| 1.3.6.1.4.1.232.145.1.5.1.21 | roamMisc2 | 1 | 1 | A misc roaming value. |
| 1.3.6.1.4.1.232.145.1.5.1.22 | roamTableLength | 1 | 1 | This object specifies the maximum number of entries the roamTable can hold. |
| 1.3.6.1.4.1.232.145.1.5.1.23 | roamTable | 1 | 14 | The Roaming table contains all the BSSs the Client is aware of. An entry in the roamTable is only valid if the roamBSSID object o… |