Setting this value will cause the UPS output to turn off
after the set number of seconds, then restart (after a UPS-defined
'down time') when the utility is again available.
Unlike UpsRecepOffDelaySecs, which might or might not,
this object always maps to the XCP 0x8A Load Dump & Restart command,
so the desired shutdown and restart behavior is guaranteed to happen.
Once set, this command cannot be aborted.
Parsed from file CPQPOWER1.62.MIB.txt
Company: None
Module: CPQPOWER-MIB
Setting this value will cause the UPS output to turn off
after the set number of seconds, then restart (after a UPS-defined
'down time') when the utility is again available.
Unlike UpsRecepOffDelaySecs, which might or might not,
this object always maps to the XCP 0x8A Load Dump & Restart command,
so the desired shutdown and restart behavior is guaranteed to happen.
Once set, this command cannot be aborted.
Parsed from file CPQPOWER-MIB.mib
Module: CPQPOWER-MIB
upsRecepShedSecsWithRestart OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Setting this value will cause the UPS output to turn off after the set number of seconds, then restart (after a UPS-defined 'down time') when the utility is again available. Unlike UpsRecepOffDelaySecs, which might or might not, this object always maps to the XCP 0x8A Load Dump & Restart command, so the desired shutdown and restart behavior is guaranteed to happen. Once set, this command cannot be aborted." ::= { upsRecepEntry 7 }
Vendor: Compaq
Module: CPQPOWER-MIB
[Automatically extracted from oidview.com]
upsRecepShedSecsWithRestart OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Setting this value will cause the UPS output to turn off after the set number of seconds, then restart (after a UPS-defined 'down time') when the utility is again available. Unlike UpsRecepOffDelaySecs, which might or might not, this object always maps to the XCP 0x8A Load Dump & Restart command, so the desired shutdown and restart behavior is guaranteed to happen. Once set, this command cannot be aborted." ::= { upsRecepEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.165.3.10.2.1.1 | upsRecepIndex | 0 | 0 | The number of the Receptacle. Serves as index for Receptacle table. |
| 1.3.6.1.4.1.232.165.3.10.2.1.2 | upsRecepStatus | 0 | 0 | The Recep Status 1=On/Close, 2=Off/Open, 3=On w/Pending Off, 4=Off w/Pending ON, 5=Unknown. |
| 1.3.6.1.4.1.232.165.3.10.2.1.3 | upsRecepOffDelaySecs | 0 | 0 | The Delay until the Receptacle is turned Off. Setting this value to other than -1 will cause the UPS output to turn off after th… |
| 1.3.6.1.4.1.232.165.3.10.2.1.4 | upsRecepOnDelaySecs | 0 | 0 | The Delay until the Receptacle is turned On. Setting this value to other than -1 will cause the UPS output to turn on after the … |
| 1.3.6.1.4.1.232.165.3.10.2.1.5 | upsRecepAutoOffDelay | 0 | 0 | The delay after going On Battery until the Receptacle is automatically turned Off. A value of -1 means that this Output should n… |
| 1.3.6.1.4.1.232.165.3.10.2.1.6 | upsRecepAutoOnDelay | 0 | 0 | Seconds delay after the Outlet is signaled to turn On before the Output is Automatically turned ON. A value of -1 means that thi… |