frAvcRowStatus is used to add/delete a row
in the table. Adding or deleting a row
corresponds to creating an avc or deleting
an avc. In order to add a row to the avc
table, a set on this parameter should be done
with the value 4 (createAndGo) and
frAvcId parameter set with the value of 65535.
A request to create a row can be
completed successfully only if a set on the
avcRowStatus and a set on the avcName
come in the same request. To delete a row
this parameter has to be set with the value 6
(destroy).
Parsed from file tiaranet-fr.mib.txt
Company: tiara
Module: TIARA-FR-MIB
frAvcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "frAvcRowStatus is used to add/delete a row in the table. Adding or deleting a row corresponds to creating an avc or deleting an avc. In order to add a row to the avc table, a set on this parameter should be done with the value 4 (createAndGo) and frAvcId parameter set with the value of 65535. A request to create a row can be completed successfully only if a set on the avcRowStatus and a set on the avcName come in the same request. To delete a row this parameter has to be set with the value 6 (destroy)." ::= { frAvcTableEntry 18}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3174.2.16.5.1.1 | frAvcId | 0 | 0 | frAvcId is the identifier of an avc. To configure an avc, this parameter must be used as the index. This is assigned internally by… |
| 1.3.6.1.4.1.3174.2.16.5.1.2 | frAvcDlci | 0 | 0 | Data Link Connection Identifier of the avc. The value ranges from 16 to 1022. This number is unique across all the avcs created. … |
| 1.3.6.1.4.1.3174.2.16.5.1.3 | frAvcName | 0 | 0 | Name of the avc. To configure an avc, this parameter must be set. That is, a descriptive name should be given to an avc. The maxim… |
| 1.3.6.1.4.1.3174.2.16.5.1.4 | frAvcIpAddr | 0 | 0 | The avc's source IP address. This is one of the parameters required to set up IP multiplexing for an avc. Also the parameters avcI… |
| 1.3.6.1.4.1.3174.2.16.5.1.5 | frAvcIpSubnetMask | 0 | 0 | This parameter represents the source subnet mask address. This is one of the parameters required to set up IP multiplexing for a a… |
| 1.3.6.1.4.1.3174.2.16.5.1.6 | frAvcSrcForwardingPrimary | 0 | 0 | The avc's destination IP address. This is one of the parameters required to set up IP multiplexing for an avc. This parameter can… |
| 1.3.6.1.4.1.3174.2.16.5.1.7 | frAvcSrcForwardingSecondary | 0 | 0 | The avc's secondary or backup destination address. This address will be used only if the primary address uses an ethernet interfa… |
| 1.3.6.1.4.1.3174.2.16.5.1.8 | frAvcRemoteIpAddr | 0 | 0 | Remote IP address to be mapped for the avc. If configured, the arp table is updated with this static entry and inverse arp reques… |
| 1.3.6.1.4.1.3174.2.16.5.1.9 | frAvcClass | 0 | 0 | classA classB classC classD classE In the case of classC/D/E, frAvcClassThreshold should be configured along with avcClass in an atom… |
| 1.3.6.1.4.1.3174.2.16.5.1.10 | frAvcClassThreshold | 0 | 0 | Threshold - minimum number of links required to activate bundle, for the avcClass 'classC'. For 'classD' or 'classE', the value w… |
| 1.3.6.1.4.1.3174.2.16.5.1.11 | frAvcFragmentSize | 0 | 0 | The frame size for multi-link frame relay End-to-End avc in bytes. This value defines the maximum size of any fragment that can … |
| 1.3.6.1.4.1.3174.2.16.5.1.12 | frAvcSegThreshold | 0 | 0 | Segment threshold packet size in bytes. This value defines the minimum size of any fragment that can be transmitted on any cvc. F… |
| 1.3.6.1.4.1.3174.2.16.5.1.13 | frAvcSequence | 0 | 0 | multilink frame relay sequence number length (short = 12 bits ; long = 24 bits.24 bit sequence space increases MFR header by 2 m… |
| 1.3.6.1.4.1.3174.2.16.5.1.14 | frAvcDiffDelay | 0 | 0 | Differential delay in milli seconds. This variable can be set only when the AVC is in Tiara Enhanced FRF.15 mode. This value indi… |
| 1.3.6.1.4.1.3174.2.16.5.1.15 | frAvcEnhancedMode | 0 | 0 | Tiara Enhanced FRF.15 mode is a modification of the standard FRF.15 to improve the end to end CVC status integrity and to calcul… |
| 1.3.6.1.4.1.3174.2.16.5.1.16 | frAvcNoOfCvcs | 0 | 0 | Indicates the number of links configured in the avc. |
| 1.3.6.1.4.1.3174.2.16.5.1.17 | frAvcTotalBw | 0 | 0 | Indicates the total bandwidth for this avc. The avc bandwidth is the aggregated band- widths of all the links assigned to a partic… |