The avc's secondary or backup destination
address. This address will be used only if
the primary address uses an ethernet interface
and failover is enabled on that interface and
the interface goes down. The secondary source
forwarding address is an optional parameter,
it should be a gateway on the alternate
ethernet This parameter is set along with the
primary source forwarding address parameter.
To unconfigure this parameter a set operation
is performed with the value 0.0.0.0 for the
primary address, or a primary address is set
with no secondary, or both primary and
secondary are set to 0.0.0.0
Parsed from file tiaranet-fr.mib.txt
Company: tiara
Module: TIARA-FR-MIB
frAvcSrcForwardingSecondary OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The avc's secondary or backup destination address. This address will be used only if the primary address uses an ethernet interface and failover is enabled on that interface and the interface goes down. The secondary source forwarding address is an optional parameter, it should be a gateway on the alternate ethernet This parameter is set along with the primary source forwarding address parameter. To unconfigure this parameter a set operation is performed with the value 0.0.0.0 for the primary address, or a primary address is set with no secondary, or both primary and secondary are set to 0.0.0.0" DEFVAL { 0 } ::= { frAvcTableEntry 7}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3174.2.16.5.1.1 | frAvcId | 0 | 0 | frAvcId is the identifier of an avc. To configure an avc, this parameter must be used as the index. This is assigned internally by… |
| 1.3.6.1.4.1.3174.2.16.5.1.2 | frAvcDlci | 0 | 0 | Data Link Connection Identifier of the avc. The value ranges from 16 to 1022. This number is unique across all the avcs created. … |
| 1.3.6.1.4.1.3174.2.16.5.1.3 | frAvcName | 0 | 0 | Name of the avc. To configure an avc, this parameter must be set. That is, a descriptive name should be given to an avc. The maxim… |
| 1.3.6.1.4.1.3174.2.16.5.1.4 | frAvcIpAddr | 0 | 0 | The avc's source IP address. This is one of the parameters required to set up IP multiplexing for an avc. Also the parameters avcI… |
| 1.3.6.1.4.1.3174.2.16.5.1.5 | frAvcIpSubnetMask | 0 | 0 | This parameter represents the source subnet mask address. This is one of the parameters required to set up IP multiplexing for a a… |
| 1.3.6.1.4.1.3174.2.16.5.1.6 | frAvcSrcForwardingPrimary | 0 | 0 | The avc's destination IP address. This is one of the parameters required to set up IP multiplexing for an avc. This parameter can… |
| 1.3.6.1.4.1.3174.2.16.5.1.8 | frAvcRemoteIpAddr | 0 | 0 | Remote IP address to be mapped for the avc. If configured, the arp table is updated with this static entry and inverse arp reques… |
| 1.3.6.1.4.1.3174.2.16.5.1.9 | frAvcClass | 0 | 0 | classA classB classC classD classE In the case of classC/D/E, frAvcClassThreshold should be configured along with avcClass in an atom… |
| 1.3.6.1.4.1.3174.2.16.5.1.10 | frAvcClassThreshold | 0 | 0 | Threshold - minimum number of links required to activate bundle, for the avcClass 'classC'. For 'classD' or 'classE', the value w… |
| 1.3.6.1.4.1.3174.2.16.5.1.11 | frAvcFragmentSize | 0 | 0 | The frame size for multi-link frame relay End-to-End avc in bytes. This value defines the maximum size of any fragment that can … |
| 1.3.6.1.4.1.3174.2.16.5.1.12 | frAvcSegThreshold | 0 | 0 | Segment threshold packet size in bytes. This value defines the minimum size of any fragment that can be transmitted on any cvc. F… |
| 1.3.6.1.4.1.3174.2.16.5.1.13 | frAvcSequence | 0 | 0 | multilink frame relay sequence number length (short = 12 bits ; long = 24 bits.24 bit sequence space increases MFR header by 2 m… |
| 1.3.6.1.4.1.3174.2.16.5.1.14 | frAvcDiffDelay | 0 | 0 | Differential delay in milli seconds. This variable can be set only when the AVC is in Tiara Enhanced FRF.15 mode. This value indi… |
| 1.3.6.1.4.1.3174.2.16.5.1.15 | frAvcEnhancedMode | 0 | 0 | Tiara Enhanced FRF.15 mode is a modification of the standard FRF.15 to improve the end to end CVC status integrity and to calcul… |
| 1.3.6.1.4.1.3174.2.16.5.1.16 | frAvcNoOfCvcs | 0 | 0 | Indicates the number of links configured in the avc. |
| 1.3.6.1.4.1.3174.2.16.5.1.17 | frAvcTotalBw | 0 | 0 | Indicates the total bandwidth for this avc. The avc bandwidth is the aggregated band- widths of all the links assigned to a partic… |
| 1.3.6.1.4.1.3174.2.16.5.1.18 | frAvcRowStatus | 0 | 0 | frAvcRowStatus is used to add/delete a row in the table. Adding or deleting a row corresponds to creating an avc or deleting an av… |