The avc's source IP address. This is one
of the parameters required to set up IP
multiplexing for an avc. Also the parameters
avcIpAddr and avcSubnetMask have to be set
together during the same request. To unconfigure
the IP address, a set operation is performed with
the value 0.0.0.0
Parsed from file tiaranet-fr.mib.txt
Company: tiara
Module: TIARA-FR-MIB
frAvcIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The avc's source IP address. This is one of the parameters required to set up IP multiplexing for an avc. Also the parameters avcIpAddr and avcSubnetMask have to be set together during the same request. To unconfigure the IP address, a set operation is performed with the value 0.0.0.0" DEFVAL { 0 } ::= { frAvcTableEntry 4}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3174.2.16.5.1.1 | frAvcId | 0 | 0 | frAvcId is the identifier of an avc. To configure an avc, this parameter must be used as the index. This is assigned internally by… |
| 1.3.6.1.4.1.3174.2.16.5.1.2 | frAvcDlci | 0 | 0 | Data Link Connection Identifier of the avc. The value ranges from 16 to 1022. This number is unique across all the avcs created. … |
| 1.3.6.1.4.1.3174.2.16.5.1.3 | frAvcName | 0 | 0 | Name of the avc. To configure an avc, this parameter must be set. That is, a descriptive name should be given to an avc. The maxim… |
| 1.3.6.1.4.1.3174.2.16.5.1.5 | frAvcIpSubnetMask | 0 | 0 | This parameter represents the source subnet mask address. This is one of the parameters required to set up IP multiplexing for a a… |
| 1.3.6.1.4.1.3174.2.16.5.1.6 | frAvcSrcForwardingPrimary | 0 | 0 | The avc's destination IP address. This is one of the parameters required to set up IP multiplexing for an avc. This parameter can… |
| 1.3.6.1.4.1.3174.2.16.5.1.7 | frAvcSrcForwardingSecondary | 0 | 0 | The avc's secondary or backup destination address. This address will be used only if the primary address uses an ethernet interfa… |
| 1.3.6.1.4.1.3174.2.16.5.1.8 | frAvcRemoteIpAddr | 0 | 0 | Remote IP address to be mapped for the avc. If configured, the arp table is updated with this static entry and inverse arp reques… |
| 1.3.6.1.4.1.3174.2.16.5.1.9 | frAvcClass | 0 | 0 | classA classB classC classD classE In the case of classC/D/E, frAvcClassThreshold should be configured along with avcClass in an atom… |
| 1.3.6.1.4.1.3174.2.16.5.1.10 | frAvcClassThreshold | 0 | 0 | Threshold - minimum number of links required to activate bundle, for the avcClass 'classC'. For 'classD' or 'classE', the value w… |
| 1.3.6.1.4.1.3174.2.16.5.1.11 | frAvcFragmentSize | 0 | 0 | The frame size for multi-link frame relay End-to-End avc in bytes. This value defines the maximum size of any fragment that can … |
| 1.3.6.1.4.1.3174.2.16.5.1.12 | frAvcSegThreshold | 0 | 0 | Segment threshold packet size in bytes. This value defines the minimum size of any fragment that can be transmitted on any cvc. F… |
| 1.3.6.1.4.1.3174.2.16.5.1.13 | frAvcSequence | 0 | 0 | multilink frame relay sequence number length (short = 12 bits ; long = 24 bits.24 bit sequence space increases MFR header by 2 m… |
| 1.3.6.1.4.1.3174.2.16.5.1.14 | frAvcDiffDelay | 0 | 0 | Differential delay in milli seconds. This variable can be set only when the AVC is in Tiara Enhanced FRF.15 mode. This value indi… |
| 1.3.6.1.4.1.3174.2.16.5.1.15 | frAvcEnhancedMode | 0 | 0 | Tiara Enhanced FRF.15 mode is a modification of the standard FRF.15 to improve the end to end CVC status integrity and to calcul… |
| 1.3.6.1.4.1.3174.2.16.5.1.16 | frAvcNoOfCvcs | 0 | 0 | Indicates the number of links configured in the avc. |
| 1.3.6.1.4.1.3174.2.16.5.1.17 | frAvcTotalBw | 0 | 0 | Indicates the total bandwidth for this avc. The avc bandwidth is the aggregated band- widths of all the links assigned to a partic… |
| 1.3.6.1.4.1.3174.2.16.5.1.18 | frAvcRowStatus | 0 | 0 | frAvcRowStatus is used to add/delete a row in the table. Adding or deleting a row corresponds to creating an avc or deleting an av… |