Used to configure subrate on an unchannelized DS3 interface using timeslots. This can
be used instead of configuring subrate in terms of bandwidth using the MIB object
dsxT3E3IfConfigDS3DsuBandwidth. This option could be more useful if the DS3 interface
of a Tiara product is connected to an external CSU/DSU. The external CSU/DSU made by
vendors Digital Link, Larscom, Adtran and Verilink allow subrate to be configured
only in terms of timeslots rather than bandwidth. In this case, the Tiara product
could be configured using the timeslots.
The permissible range of timeslots varies for each mode in the MIB object
dsxT3E3IfConfigDS3ScramblingMode.
mode-0 (Digital Link)
mode-1 (Kentrox)
mode-2 (Larscom)
mode-3 (Adtran)
mode-4 (Verilink)
mode-5 (Tiara)
Note that in modes 1 and 5, timeslots configuration is not supported.
Parsed from file tiaranet-dsx-te3.mib.txt
Company: tiara
Module: TIARA-NETWORKS-DSX-TE3-MIB
dsxT3E3IfConfigDS3Timeslots OBJECT-TYPE SYNTAX INTEGER (1..588) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to configure subrate on an unchannelized DS3 interface using timeslots. This can be used instead of configuring subrate in terms of bandwidth using the MIB object dsxT3E3IfConfigDS3DsuBandwidth. This option could be more useful if the DS3 interface of a Tiara product is connected to an external CSU/DSU. The external CSU/DSU made by vendors Digital Link, Larscom, Adtran and Verilink allow subrate to be configured only in terms of timeslots rather than bandwidth. In this case, the Tiara product could be configured using the timeslots. The permissible range of timeslots varies for each mode in the MIB object dsxT3E3IfConfigDS3ScramblingMode. mode-0 (Digital Link) mode-1 (Kentrox) mode-2 (Larscom) mode-3 (Adtran) mode-4 (Verilink) mode-5 (Tiara) Note that in modes 1 and 5, timeslots configuration is not supported." ::= { dsxT3E3IfConfigLineEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.1 | dsxT3E3IfIndex | 0 | 0 | An integer value which is an index in to the entries of ifTable (MIB-II) whose interface type is ds3 |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.2 | dsxT3E3IfConfigLineType | 0 | 0 | This variable indicates the variety of T3/E3 C-bit or E3 application implementing this interface. The type of interface affects t… |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.3 | dsxT3E3IfConfigLineCode | 0 | 0 | This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its charac… |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.4 | dsxT3E3IfConfigCableLength | 0 | 0 | The length of the T3/E3 line in feet. This object provides information for line build out circuitry if it exists and can use thi… |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.5 | dsxT3E3IfConfigTransmitClock | 0 | 0 | The source of Transmit Clock. is derived from the recovered receive clock of another T3/E3 interface |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.6 | dsxT3E3IfConfigDS3ScramblingMode | 0 | 0 | Scrambling mode |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.7 | dsxT3E3IfConfigDS3ScramblingEnable | 0 | 0 | To enable or disable scrambling. This is applicable only to clear channel TE3. |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.8 | dsxT3E3IfConfigDS3DsuBandwidth | 0 | 0 | Dsu Bandwidth in Kbps as configured by the user. Used for configuring subrate on an unchannlized DS3 interface. Instead of using… |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.9 | dsxT3E3IfConfigDS3ActualBandwidth | 0 | 0 | Dsu Bandwidth configured by the user using the MIB object dsxT3E3IfConfigDS3DsuBandwidth may call for internal rounding off base… |