Dsu Bandwidth in Kbps as configured by the user. Used for configuring subrate on an
unchannlized DS3 interface. Instead of using this MIB object, subrate can be configured
using the MIB object dsxT3E3IfConfigDS3Timeslots also.
Parsed from file tiaranet-dsx-te3.mib.txt
Company: tiara
Module: TIARA-NETWORKS-DSX-TE3-MIB
dsxT3E3IfConfigDS3DsuBandwidth OBJECT-TYPE SYNTAX INTEGER (1..44210) MAX-ACCESS read-write STATUS current DESCRIPTION "Dsu Bandwidth in Kbps as configured by the user. Used for configuring subrate on an unchannlized DS3 interface. Instead of using this MIB object, subrate can be configured using the MIB object dsxT3E3IfConfigDS3Timeslots also." ::= { dsxT3E3IfConfigLineEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.1 | dsxT3E3IfIndex | 0 | 0 | An integer value which is an index in to the entries of ifTable (MIB-II) whose interface type is ds3 |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.2 | dsxT3E3IfConfigLineType | 0 | 0 | This variable indicates the variety of T3/E3 C-bit or E3 application implementing this interface. The type of interface affects t… |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.3 | dsxT3E3IfConfigLineCode | 0 | 0 | This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its charac… |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.4 | dsxT3E3IfConfigCableLength | 0 | 0 | The length of the T3/E3 line in feet. This object provides information for line build out circuitry if it exists and can use thi… |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.5 | dsxT3E3IfConfigTransmitClock | 0 | 0 | The source of Transmit Clock. is derived from the recovered receive clock of another T3/E3 interface |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.6 | dsxT3E3IfConfigDS3ScramblingMode | 0 | 0 | Scrambling mode |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.7 | dsxT3E3IfConfigDS3ScramblingEnable | 0 | 0 | To enable or disable scrambling. This is applicable only to clear channel TE3. |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.9 | dsxT3E3IfConfigDS3ActualBandwidth | 0 | 0 | Dsu Bandwidth configured by the user using the MIB object dsxT3E3IfConfigDS3DsuBandwidth may call for internal rounding off base… |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.10 | dsxT3E3IfConfigDS3Timeslots | 0 | 0 | Used to configure subrate on an unchannelized DS3 interface using timeslots. This can be used instead of configuring subrate in … |