This variable indicates the variety of T3/E3 C-bit
or E3 application implementing this interface. The
type of interface affects the interpretation of
the usage and error statistics. The rate of T3/E3
is 44.736 Mbps and E3 is 34.368 Mbps. .
The values, in sequence, describe:
linetype-m13 ANSI T1.107-1988
linetype-cbitparity ANSI T1.107a-1990
Parsed from file tiaranet-dsx-te3.mib.txt
Company: None
Module: TIARA-NETWORKS-DSX-TE3-MIB
This variable indicates the variety of T3/E3 C-bit
or E3 application implementing this interface. The
type of interface affects the interpretation of
the usage and error statistics. The rate of T3/E3
is 44.736 Mbps and E3 is 34.368 Mbps. .
The values, in sequence, describe:
linetype-m13 ANSI T1.107-1988
linetype-cbitparity ANSI T1.107a-1990
Parsed from file TIARA-NETWORKS-DSX-TE3-MIB.mib
Module: TIARA-NETWORKS-DSX-TE3-MIB
Vendor: Tasman Networks, Inc.
Module: TIARA-NETWORKS-DSX-TE3-MIB
[Automatically extracted from oidview.com]
dsxT3E3IfConfigLineType OBJECT-TYPE SYNTAX INTEGER { linetype-m13 (2), linetype-cbitparity (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates the variety of T3/E3 C-bit or E3 application implementing this interface. The type of interface affects the interpretation of the usage and error statistics. The rate of T3/E3 is 44.736 Mbps and E3 is 34.368 Mbps. . The values, in sequence, describe: linetype-m13 ANSI T1.107-1988 linetype-cbitparity ANSI T1.107a-1990" ::= { dsxT3E3IfConfigLineEntry 2 }
dsxT3E3IfConfigLineType OBJECT-TYPE SYNTAX INTEGER { linetype-m13 (2), linetype-cbitparity (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates the variety of T3/E3 C-bit or E3 application implementing this interface. The type of interface affects the interpretation of the usage and error statistics. The rate of T3/E3 is 44.736 Mbps and E3 is 34.368 Mbps. . The values, in sequence, describe: linetype-m13 ANSI T1.107-1988 linetype-cbitparity ANSI T1.107a-1990" ::= { dsxT3E3IfConfigLineEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.1 | dsxT3E3IfIndex | 0 | 0 | An integer value which is an index in to the entries of ifTable (MIB-II) whose interface type is ds3 |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.3 | dsxT3E3IfConfigLineCode | 0 | 0 | This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its charac… |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.4 | dsxT3E3IfConfigCableLength | 0 | 0 | The length of the T3/E3 line in feet. This object provides information for line build out circuitry if it exists and can use thi… |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.5 | dsxT3E3IfConfigTransmitClock | 0 | 0 | The source of Transmit Clock. is derived from the recovered receive clock of another T3/E3 interface |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.6 | dsxT3E3IfConfigDS3ScramblingMode | 0 | 0 | Scrambling mode |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.7 | dsxT3E3IfConfigDS3ScramblingEnable | 0 | 0 | To enable or disable scrambling. This is applicable only to clear channel TE3. |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.8 | dsxT3E3IfConfigDS3DsuBandwidth | 0 | 0 | Dsu Bandwidth in Kbps as configured by the user. Used for configuring subrate on an unchannlized DS3 interface. Instead of using… |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.9 | dsxT3E3IfConfigDS3ActualBandwidth | 0 | 0 | Dsu Bandwidth configured by the user using the MIB object dsxT3E3IfConfigDS3DsuBandwidth may call for internal rounding off base… |
| 1.3.6.1.4.1.3174.2.7.1.3.1.1.1.1.10 | dsxT3E3IfConfigDS3Timeslots | 0 | 0 | Used to configure subrate on an unchannelized DS3 interface using timeslots. This can be used instead of configuring subrate in … |