| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.1 |
memInputsConfigModuleNumber | 0 | 0 |
The number of the module that the input is attached to. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.2 |
memInputsConfigInputNumber | 0 | 0 |
The number of this input on the module. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.3 |
memInputName | 0 | 0 |
The name of the input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.4 |
memInputLocation | 0 | 0 |
The location of the input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.5 |
memInputType | 0 | 0 |
The type of input this contact will take. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.6 |
memInputAlarmGeneration | 0 | 0 |
Enable or disable alarm generation on this input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.7 |
memInputNormalState | 0 | 0 |
Defines the normal (no alarm) state of the input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.8 |
memInputAbnormalSeverity | 0 | 0 |
Defines the severity of the event that is associated with the abnormal state of the input. This OID will return inputSeverityNot… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.9 |
memInputNumberCalibrationPoints | 0 | 0 |
The number of calibration points that are required for this input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.11 |
memInputAnalogCalibrationPoint2 | 0 | 0 |
The electrical value that the input sensor will measure at the second calibration point. This OID is relevant only for inputs con… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.12 |
memInputAnalogCalibrationPoint3 | 0 | 0 |
The electrical value that the input sensor will measure at the third calibration point. This OID is relevant only for inputs conf… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.13 |
memInputAnalogCalibrationPoint4 | 0 | 0 |
The electrical value that the input sensor will measure at the fourth calibration point. This OID is relevant only for inputs con… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.14 |
memInputAnalogCalibrationPoint5 | 0 | 0 |
The electrical value that the input sensor will measure at the fifth calibration point. This OID is relevant only for inputs conf… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.15 |
memInputAnalogCalibrationPoint1Value | 0 | 0 |
The value of the input, in units of measure defined by the user, that corresponds to the current setting at the first calibration… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.16 |
memInputAnalogCalibrationPoint2Value | 0 | 0 |
The value of the input, in units of measure defined by the user, that corresponds to the current setting at the second calibratio… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.17 |
memInputAnalogCalibrationPoint3Value | 0 | 0 |
The value of the input, in units of measure defined by the user, that corresponds to the current setting at the third calibration… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.18 |
memInputAnalogCalibrationPoint4Value | 0 | 0 |
The value of the input, in units of measure defined by the user, that corresponds to the current setting at the fourth calibratio… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.19 |
memInputAnalogCalibrationPoint5Value | 0 | 0 |
The value of the input, in units of measure defined by the user, that corresponds to the current setting at the fifth calibration… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.20 |
memInputAnalogMeasurementUnits | 0 | 0 |
The units of measure to be used for this input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.21 |
memInputAnalogMaxThresh | 0 | 0 |
The input value at which a maximum threshold violation alarm will be generated on this input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.22 |
memInputAnalogHighThresh | 0 | 0 |
memInputAnalogHighthresh |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.23 |
memInputAnalogLowThresh | 0 | 0 |
The input value at which a low threshold violation alarm will be generated on this input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.24 |
memInputAnalogMinThresh | 0 | 0 |
The input value at which a minimum threshold violation alarm will be generated on this input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.25 |
memInputAnalogThreshHysteresis | 0 | 0 |
The change in value required to cause an alarm on this input to change from active to inactive. |