The electrical value that the input sensor will measure at the
third calibration point.
This OID is relevant only for inputs configured as analog type (ma or V).
Parsed from file powernet.mib.txt
Company: None
Module: PowerNet-MIB
The electrical value that the input sensor will measure at the
third calibration point.
This OID is relevant only for inputs configured as analog type (ma or V).
Parsed from file PowerNet-MIB.mib
Module: PowerNet-MIB
memInputAnalogCalibrationPoint3 OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The electrical value that the input sensor will measure at the third calibration point. This OID is relevant only for inputs configured as analog type (ma or V)." ::= { memInputsConfigTableEntry 12 }
Vendor: American Power Conversion Corp.
Module: PowerNet-MIB
[Automatically extracted from oidview.com]
memInputAnalogCalibrationPoint3 OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The electrical value that the input sensor will measure at the third calibration point. This OID is relevant only for inputs configured as analog type (ma or V)." ::= { memInputsConfigEntry 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.1 | memInputsConfigModuleNumber | 0 | 0 | The number of the module that the input is attached to. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.2 | memInputsConfigInputNumber | 0 | 0 | The number of this input on the module. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.3 | memInputName | 0 | 0 | The name of the input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.4 | memInputLocation | 0 | 0 | The location of the input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.5 | memInputType | 0 | 0 | The type of input this contact will take. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.6 | memInputAlarmGeneration | 0 | 0 | Enable or disable alarm generation on this input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.7 | memInputNormalState | 0 | 0 | Defines the normal (no alarm) state of the input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.8 | memInputAbnormalSeverity | 0 | 0 | Defines the severity of the event that is associated with the abnormal state of the input. This OID will return inputSeverityNot… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.9 | memInputNumberCalibrationPoints | 0 | 0 | The number of calibration points that are required for this input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.10 | memInputAnalogCalibrationPoint1 | 0 | 0 | The electrical value that the input sensor will measure at the first calibration point. This OID is relevant only for inputs conf… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.11 | memInputAnalogCalibrationPoint2 | 0 | 0 | The electrical value that the input sensor will measure at the second calibration point. This OID is relevant only for inputs con… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.13 | memInputAnalogCalibrationPoint4 | 0 | 0 | The electrical value that the input sensor will measure at the fourth calibration point. This OID is relevant only for inputs con… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.14 | memInputAnalogCalibrationPoint5 | 0 | 0 | The electrical value that the input sensor will measure at the fifth calibration point. This OID is relevant only for inputs conf… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.15 | memInputAnalogCalibrationPoint1Value | 0 | 0 | The value of the input, in units of measure defined by the user, that corresponds to the current setting at the first calibration… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.16 | memInputAnalogCalibrationPoint2Value | 0 | 0 | The value of the input, in units of measure defined by the user, that corresponds to the current setting at the second calibratio… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.17 | memInputAnalogCalibrationPoint3Value | 0 | 0 | The value of the input, in units of measure defined by the user, that corresponds to the current setting at the third calibration… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.18 | memInputAnalogCalibrationPoint4Value | 0 | 0 | The value of the input, in units of measure defined by the user, that corresponds to the current setting at the fourth calibratio… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.19 | memInputAnalogCalibrationPoint5Value | 0 | 0 | The value of the input, in units of measure defined by the user, that corresponds to the current setting at the fifth calibration… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.20 | memInputAnalogMeasurementUnits | 0 | 0 | The units of measure to be used for this input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.21 | memInputAnalogMaxThresh | 0 | 0 | The input value at which a maximum threshold violation alarm will be generated on this input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.22 | memInputAnalogHighThresh | 0 | 0 | memInputAnalogHighthresh |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.23 | memInputAnalogLowThresh | 0 | 0 | The input value at which a low threshold violation alarm will be generated on this input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.24 | memInputAnalogMinThresh | 0 | 0 | The input value at which a minimum threshold violation alarm will be generated on this input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.25 | memInputAnalogThreshHysteresis | 0 | 0 | The change in value required to cause an alarm on this input to change from active to inactive. |