The location of the input.
Parsed from file powernet.mib.txt
Company: None
Module: PowerNet-MIB
The location of the input.
Parsed from file PowerNet-MIB.mib
Module: PowerNet-MIB
memInputLocation OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The location of the input." ::= { memInputsConfigTableEntry 4 }
Vendor: American Power Conversion Corp.
Module: PowerNet-MIB
[Automatically extracted from oidview.com]
memInputLocation OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The location of the input." ::= { memInputsConfigEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.1 | memInputsConfigModuleNumber | 0 | 0 | The number of the module that the input is attached to. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.2 | memInputsConfigInputNumber | 0 | 0 | The number of this input on the module. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.3 | memInputName | 0 | 0 | The name of the input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.5 | memInputType | 0 | 0 | The type of input this contact will take. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.6 | memInputAlarmGeneration | 0 | 0 | Enable or disable alarm generation on this input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.7 | memInputNormalState | 0 | 0 | Defines the normal (no alarm) state of the input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.8 | memInputAbnormalSeverity | 0 | 0 | Defines the severity of the event that is associated with the abnormal state of the input. This OID will return inputSeverityNot… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.9 | memInputNumberCalibrationPoints | 0 | 0 | The number of calibration points that are required for this input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.10 | memInputAnalogCalibrationPoint1 | 0 | 0 | The electrical value that the input sensor will measure at the first calibration point. This OID is relevant only for inputs conf… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.11 | memInputAnalogCalibrationPoint2 | 0 | 0 | The electrical value that the input sensor will measure at the second calibration point. This OID is relevant only for inputs con… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.12 | memInputAnalogCalibrationPoint3 | 0 | 0 | The electrical value that the input sensor will measure at the third calibration point. This OID is relevant only for inputs conf… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.13 | memInputAnalogCalibrationPoint4 | 0 | 0 | The electrical value that the input sensor will measure at the fourth calibration point. This OID is relevant only for inputs con… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.14 | memInputAnalogCalibrationPoint5 | 0 | 0 | The electrical value that the input sensor will measure at the fifth calibration point. This OID is relevant only for inputs conf… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.15 | memInputAnalogCalibrationPoint1Value | 0 | 0 | The value of the input, in units of measure defined by the user, that corresponds to the current setting at the first calibration… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.16 | memInputAnalogCalibrationPoint2Value | 0 | 0 | The value of the input, in units of measure defined by the user, that corresponds to the current setting at the second calibratio… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.17 | memInputAnalogCalibrationPoint3Value | 0 | 0 | The value of the input, in units of measure defined by the user, that corresponds to the current setting at the third calibration… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.18 | memInputAnalogCalibrationPoint4Value | 0 | 0 | The value of the input, in units of measure defined by the user, that corresponds to the current setting at the fourth calibratio… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.19 | memInputAnalogCalibrationPoint5Value | 0 | 0 | The value of the input, in units of measure defined by the user, that corresponds to the current setting at the fifth calibration… |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.20 | memInputAnalogMeasurementUnits | 0 | 0 | The units of measure to be used for this input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.21 | memInputAnalogMaxThresh | 0 | 0 | The input value at which a maximum threshold violation alarm will be generated on this input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.22 | memInputAnalogHighThresh | 0 | 0 | memInputAnalogHighthresh |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.23 | memInputAnalogLowThresh | 0 | 0 | The input value at which a low threshold violation alarm will be generated on this input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.24 | memInputAnalogMinThresh | 0 | 0 | The input value at which a minimum threshold violation alarm will be generated on this input. |
| 1.3.6.1.4.1.318.1.1.10.4.3.4.1.25 | memInputAnalogThreshHysteresis | 0 | 0 | The change in value required to cause an alarm on this input to change from active to inactive. |