rPDUIdent OBJECT IDENTIFIER ::= { rPDU 1 }
Vendor: American Power Conversion Corp.
Module: PowerNet-MIB
[Automatically extracted from oidview.com]
rPDUIdent OBJECT IDENTIFIER ::= { rPDU 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.318.1.1.12.1.1 | rPDUIdentName | 1 | 1 | The name of the Rack PDU. The maximum string size is device dependent. |
| 1.3.6.1.4.1.318.1.1.12.1.2 | rPDUIdentHardwareRev | 1 | 1 | The hardware revision of the Rack PDU. This value is set at the factory. |
| 1.3.6.1.4.1.318.1.1.12.1.3 | rPDUIdentFirmwareRev | 1 | 1 | An 8-byte ID string identifying the Rack PDU firmware revision. This value is set at the factory. |
| 1.3.6.1.4.1.318.1.1.12.1.4 | rPDUIdentDateOfManufacture | 1 | 1 | The date when the Rack PDU was manufactured in mm/dd/yyyy format. This value is set at the factory. The year 2000 will be represe… |
| 1.3.6.1.4.1.318.1.1.12.1.5 | rPDUIdentModelNumber | 1 | 1 | A 10-character string identifying the model number of the Rack PDU. This value is set at the factory. |
| 1.3.6.1.4.1.318.1.1.12.1.6 | rPDUIdentSerialNumber | 1 | 1 | A 12-character string identifying the serial number of the Rack PDU. This value is set at the factory. |
| 1.3.6.1.4.1.318.1.1.12.1.7 | rPDUIdentDeviceRating | 1 | 1 | Getting this OID will return the electrical rating of the device in Amps. |
| 1.3.6.1.4.1.318.1.1.12.1.8 | rPDUIdentDeviceNumOutlets | 1 | 1 | Getting this OID will return the number of outlets contained in the device. |
| 1.3.6.1.4.1.318.1.1.12.1.9 | rPDUIdentDeviceNumPhases | 1 | 1 | Getting this OID will return the number of phases supported by the device. |
| 1.3.6.1.4.1.318.1.1.12.1.10 | rPDUIdentDeviceNumBreakers | 1 | 1 | Getting this OID will return the number of circuit breakers supported by the device. This is the same as the number of banks of … |
| 1.3.6.1.4.1.318.1.1.12.1.11 | rPDUIdentDeviceBreakerRating | 1 | 1 | Getting this OID will return rating of the circuit breakers on the device in Amps if it has any. |
| 1.3.6.1.4.1.318.1.1.12.1.12 | rPDUIdentDeviceOrientation | 1 | 1 | Getting this OID will return the intended physical orientation of the device. OrientHorizonatal(1) indicates Horizontal. OrientV… |
| 1.3.6.1.4.1.318.1.1.12.1.13 | rPDUIdentDeviceOutletLayout | 1 | 1 | Getting this OID will return outlet layout for the device. seqPhaseToNeutral(1) indicates outlet layout as follows: 1:1-N,2:2-N,3… |
| 1.3.6.1.4.1.318.1.1.12.1.14 | rPDUIdentDeviceDisplayOrientation | 1 | 1 | Getting this OID will return the intended physical orientation of the Seven-Segment Display. Normal(1) indicates Normal. Reverse… |
| 1.3.6.1.4.1.318.1.1.12.1.15 | rPDUIdentDeviceLinetoLineVoltage | 1 | 1 | Getting/Setting this OID will return/set the Line to Line Voltage. This OID defaults to the nominal input line voltage in volts … |
| 1.3.6.1.4.1.318.1.1.12.1.16 | rPDUIdentDevicePowerWatts | 1 | 1 | Getting this OID will return the Power in Watts. |
| 1.3.6.1.4.1.318.1.1.12.1.17 | rPDUIdentDevicePowerFactor | 1 | 1 | Getting/setting this OID will return/set the Power Factor in thousanths (1000 is power factor of 1). For AP8XXX SKUs, this OID is… |
| 1.3.6.1.4.1.318.1.1.12.1.18 | rPDUIdentDevicePowerVA | 1 | 1 | Getting this OID will return the Power in VA. |
| 1.3.6.1.4.1.318.1.1.12.1.19 | rPDUIdentDeviceLinetoNeutralVoltage | 0 | 0 | Getting/Setting this OID will return/set the Line to Neutral Voltage. This OID defaults to the nominal line to neutral voltage i… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.318.1.1.12.2 | rPDULoad | 4 | 47 | None |
| 1.3.6.1.4.1.318.1.1.12.3 | rPDUOutlet | 6 | 59 | None |
| 1.3.6.1.4.1.318.1.1.12.4 | rPDUPowerSupply | 1 | 7 | None |
| 1.3.6.1.4.1.318.1.1.12.5 | rPDUStatus | 6 | 21 | None |