Getting/Setting this OID will return/set the Line to Line Voltage.
This OID defaults to the nominal input line voltage in volts AC.
This setting is used to calculate total power and must be configured for best accuracy.
This OID does not apply to AP86XX, AP88XX, or AP89XX SKUs.
The valid range is between 0V to 440V
Parsed from file powernet.mib.txt
Company: None
Module: PowerNet-MIB
Getting/Setting this OID will return/set the Line to Line Voltage.
This OID defaults to the nominal input line voltage in volts AC.
This setting is used to calculate total power and must be configured for best accuracy.
This OID does not apply to AP86XX, AP88XX, or AP89XX SKUs.
The valid range is between 0V to 440V
Parsed from file PowerNet-MIB.mib
Module: PowerNet-MIB
rPDUIdentDeviceLinetoLineVoltage OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Getting/Setting this OID will return/set the Line to Line Voltage. This OID defaults to the nominal input line voltage in volts AC. This setting is used to calculate total power and must be configured for best accuracy. This OID does not apply to AP86XX, AP88XX, or AP89XX SKUs. The valid range is between 0V to 440V" ::= { rPDUIdent 15 }
Vendor: American Power Conversion Corp.
Module: PowerNet-MIB
[Automatically extracted from oidview.com]
rPDUIdentDeviceLinetoLineVoltage OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Getting/Setting this OID will return/set the Line to Line Voltage. This OID defaults to the nominal input line voltage in volts AC. This setting is used to calculate total power and must be configured for best accuracy. This OID does not apply to AP86XX, AP88XX, or AP89XX SKUs. The valid range is between 0V to 440V" ::= { rPDUIdent 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.318.1.1.12.1.15.0 | rPDUIdentDeviceLinetoLineVoltage | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.318.1.1.12.1.1 | rPDUIdentName | 1 | 1 | The name of the Rack PDU. The maximum string size is device dependent. |
| 1.3.6.1.4.1.318.1.1.12.1.2 | rPDUIdentHardwareRev | 1 | 1 | The hardware revision of the Rack PDU. This value is set at the factory. |
| 1.3.6.1.4.1.318.1.1.12.1.3 | rPDUIdentFirmwareRev | 1 | 1 | An 8-byte ID string identifying the Rack PDU firmware revision. This value is set at the factory. |
| 1.3.6.1.4.1.318.1.1.12.1.4 | rPDUIdentDateOfManufacture | 1 | 1 | The date when the Rack PDU was manufactured in mm/dd/yyyy format. This value is set at the factory. The year 2000 will be represe… |
| 1.3.6.1.4.1.318.1.1.12.1.5 | rPDUIdentModelNumber | 1 | 1 | A 10-character string identifying the model number of the Rack PDU. This value is set at the factory. |
| 1.3.6.1.4.1.318.1.1.12.1.6 | rPDUIdentSerialNumber | 1 | 1 | A 12-character string identifying the serial number of the Rack PDU. This value is set at the factory. |
| 1.3.6.1.4.1.318.1.1.12.1.7 | rPDUIdentDeviceRating | 1 | 1 | Getting this OID will return the electrical rating of the device in Amps. |
| 1.3.6.1.4.1.318.1.1.12.1.8 | rPDUIdentDeviceNumOutlets | 1 | 1 | Getting this OID will return the number of outlets contained in the device. |
| 1.3.6.1.4.1.318.1.1.12.1.9 | rPDUIdentDeviceNumPhases | 1 | 1 | Getting this OID will return the number of phases supported by the device. |
| 1.3.6.1.4.1.318.1.1.12.1.10 | rPDUIdentDeviceNumBreakers | 1 | 1 | Getting this OID will return the number of circuit breakers supported by the device. This is the same as the number of banks of … |
| 1.3.6.1.4.1.318.1.1.12.1.11 | rPDUIdentDeviceBreakerRating | 1 | 1 | Getting this OID will return rating of the circuit breakers on the device in Amps if it has any. |
| 1.3.6.1.4.1.318.1.1.12.1.12 | rPDUIdentDeviceOrientation | 1 | 1 | Getting this OID will return the intended physical orientation of the device. OrientHorizonatal(1) indicates Horizontal. OrientV… |
| 1.3.6.1.4.1.318.1.1.12.1.13 | rPDUIdentDeviceOutletLayout | 1 | 1 | Getting this OID will return outlet layout for the device. seqPhaseToNeutral(1) indicates outlet layout as follows: 1:1-N,2:2-N,3… |
| 1.3.6.1.4.1.318.1.1.12.1.14 | rPDUIdentDeviceDisplayOrientation | 1 | 1 | Getting this OID will return the intended physical orientation of the Seven-Segment Display. Normal(1) indicates Normal. Reverse… |
| 1.3.6.1.4.1.318.1.1.12.1.16 | rPDUIdentDevicePowerWatts | 1 | 1 | Getting this OID will return the Power in Watts. |
| 1.3.6.1.4.1.318.1.1.12.1.17 | rPDUIdentDevicePowerFactor | 1 | 1 | Getting/setting this OID will return/set the Power Factor in thousanths (1000 is power factor of 1). For AP8XXX SKUs, this OID is… |
| 1.3.6.1.4.1.318.1.1.12.1.18 | rPDUIdentDevicePowerVA | 1 | 1 | Getting this OID will return the Power in VA. |
| 1.3.6.1.4.1.318.1.1.12.1.19 | rPDUIdentDeviceLinetoNeutralVoltage | 0 | 0 | Getting/Setting this OID will return/set the Line to Neutral Voltage. This OID defaults to the nominal line to neutral voltage i… |