The name of the outlet. The maximum size is
23 characters. The name is set by using the
sPDUOutletConfigMSPallOutletName OID.
This OID is provided for informational purposes only.
Parsed from file powernet.mib.txt
Company: None
Module: PowerNet-MIB
The name of the outlet. The maximum size is
23 characters. The name is set by using the
sPDUOutletConfigMSPallOutletName OID.
This OID is provided for informational purposes only.
Parsed from file PowerNet-MIB.mib
Module: PowerNet-MIB
sPDUOutletConfigMSPgsOutletName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The name of the outlet. The maximum size is 23 characters. The name is set by using the sPDUOutletConfigMSPallOutletName OID. This OID is provided for informational purposes only." ::= { sPDUOutletConfigMSPgsEntry 4 }
Vendor: American Power Conversion Corp.
Module: PowerNet-MIB
[Automatically extracted from oidview.com]
sPDUOutletConfigMSPgsOutletName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The name of the outlet. The maximum size is 23 characters. The name is set by using the sPDUOutletConfigMSPallOutletName OID. This OID is provided for informational purposes only." ::= { sPDUOutletConfigMSPgsEntry 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.318.1.1.6.6.2.1.1.1 | sPDUOutletConfigMSPgsIndex | 0 | 0 | The index to the MasterSwitch plus. |
1.3.6.1.4.1.318.1.1.6.6.2.1.1.2 | sPDUOutletConfigMSPgsName | 0 | 0 | The name of the MasterSwitch plus. The maximum value is 23 characters. The name is set by using the sPDUMasterConfigMSPName OID. |
1.3.6.1.4.1.318.1.1.6.6.2.1.1.3 | sPDUOutletConfigMSPgsOutletIndex | 0 | 0 | The index to the outlet entry. |
1.3.6.1.4.1.318.1.1.6.6.2.1.1.5 | sPDUOutletConfigMSPgsOutletCtrlMode | 0 | 0 | The Control Mode of the outlet. This OID is provided for informational purposes only. |
1.3.6.1.4.1.318.1.1.6.6.2.1.1.6 | sPDUOutletConfigMSPgsDeviceConfirm | 0 | 0 | Setting this OID to deviceConfirmNo (1) cause the outlet to NOT wait for device confirmation while performing graceful operations… |
1.3.6.1.4.1.318.1.1.6.6.2.1.1.7 | sPDUOutletConfigMSPgsLowBattWarning | 0 | 0 | The amount of delay, in 6 second intervals, between when the UPS goes on battery and the power down sequence for the outlet is in… |
1.3.6.1.4.1.318.1.1.6.6.2.1.1.8 | sPDUOutletConfigMSPgsLowBattMult | 0 | 0 | Only applicable if sPDUOutletConfigMSPgsLowBattWarning OID is set to -1 (On Runtime Remaining). Allows you to set the value to s… |
1.3.6.1.4.1.318.1.1.6.6.2.1.1.9 | sPDUOutletConfigMSPgsRestartDelay | 0 | 0 | The amount of delay, in 6 minute intervals, between when the outlet is turned off and the outlet is turned back on when performin… |
1.3.6.1.4.1.318.1.1.6.6.2.1.1.10 | sPDUOutletConfigMSPgsPowerOnDelay | 0 | 0 | The amount of delay, in seconds, between the UPS entering normal (on-line) state and the outlet being powered on. Allowed values… |
1.3.6.1.4.1.318.1.1.6.6.2.1.1.11 | sPDUOutletConfigMSPgsPowerOffDelay | 0 | 0 | The amount of delay, in seconds, between when the server shuts down and the outlet is powered off. Allowed values are: 0 - 9999 s… |
1.3.6.1.4.1.318.1.1.6.6.2.1.1.12 | sPDUOutletConfigMSPgsBattCapThresh | 0 | 0 | The minimum battery capacity, as a percent (0-100%), required of the UPS before an outlet will be allowed to power on. Allowed v… |
1.3.6.1.4.1.318.1.1.6.6.2.1.1.13 | sPDUOutletConfigMSPgsRebootDuration | 0 | 0 | The amount of delay, in seconds, from outlet off until outlet on during a reboot. Allowed values are: 0 - 9999 seconds (0 - 2 hrs… |