The control of the output relays. This is a binary
setting with each bit representing an alarm state.
To set K1 on a high alarm, set the 1st bit (1).
To set K2 on a high alarm, set the 2nd bit (2).
To set K1 on a low alarm, set the 3rd bit (4).
To set K2 on a low alarm, set the 4th bit (8).
To set K1 on a digital alarm, set the 1st bit (1).
To set K2 on a digital alarm, set the 2nd bit (2).
For no action. set this value to 0.
The range of this setting is 0..15.
This variable is stored in non-volatile memory.
Parsed from file Falconmib.txt
Company: None
Module: RLE-FALCON-MIB
When input 8 reaches or goes below this value a trap will
be generated signifying a low alarm condition at sensor 8.
The LowLimit variable is stored in non-volatile memory.
Parsed from file RLE-FALCON-MIB.mib
Module: RLE-FALCON-MIB
Vendor: Raymond and Lae Engineering, Inc.
Module: RLE-FALCON-MIB
[Automatically extracted from oidview.com]
FalconInput8RlyControl OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The control of the output relays. This is a binary setting with each bit representing an alarm state. To set K1 on a high alarm, set the 1st bit (1). To set K2 on a high alarm, set the 2nd bit (2). To set K1 on a low alarm, set the 3rd bit (4). To set K2 on a low alarm, set the 4th bit (8). To set K1 on a digital alarm, set the 1st bit (1). To set K2 on a digital alarm, set the 2nd bit (2). For no action. set this value to 0. The range of this setting is 0..15. This variable is stored in non-volatile memory." ::= { FalconInput8 9 }
falconInput8LowLimit OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "When input 8 reaches or goes below this value a trap will be generated signifying a low alarm condition at sensor 8. The LowLimit variable is stored in non-volatile memory." ::= { falconInput8 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3184.1.1.1.3.8.9.0 | 0 | 0 | 0 | FalconInput8LowLimit |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3184.1.1.1.3.8.1 | FalconInput8State | 1 | 1 | The state of use of Input Number 8. When a sensor is connected to Input 8 set State to installed(2) to indicate that the value of… |
| 1.3.6.1.4.1.3184.1.1.1.3.8.2 | FalconInput8Reading | 1 | 1 | The reading for sensor 8. If the input is digital, the reading will be 1 (active) or 0 (inactive) |
| 1.3.6.1.4.1.3184.1.1.1.3.8.3 | FalconInput8Gain | 1 | 1 | A correction gain associated with the sensor variable. The value of gain is multiplied by the value from Input Sensor Number 8 to… |
| 1.3.6.1.4.1.3184.1.1.1.3.8.4 | FalconInput8Offset | 1 | 1 | A correction Offset associated with the sensor variable. The value of Offset is added to the value from Input Sensor Number 8 to … |
| 1.3.6.1.4.1.3184.1.1.1.3.8.5 | FalconInput8Label | 1 | 1 | A user-defined text string associated with Input Number 8. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.3184.1.1.1.3.8.6 | FalconInput8UOM | 1 | 1 | A user-defined text string associated with Input Number 8. The text string is stored in non-volatile memory. |
| 1.3.6.1.4.1.3184.1.1.1.3.8.7 | FalconInput8HighLimit2 | 1 | 1 | When input 8 reaches or exceeds this value a trap will be generated signifying a high alarm condition at sensor 8. The HighLimit v… |
| 1.3.6.1.4.1.3184.1.1.1.3.8.8 | FalconInput8HighLimit | 1 | 1 | When input 8 reaches or exceeds this value a trap will be generated signifying a high alarm condition at sensor 8. The HighLimit v… |
| 1.3.6.1.4.1.3184.1.1.1.3.8.10 | FalconInput8LowLimit2, FalconInput8Delay | 1 | 1 | The number of seconds an alarm for this input must be present before annunication. The range of this setting is 0..600. This varia… |
| 1.3.6.1.4.1.3184.1.1.1.3.8.11 | FalconInput8Hysteresis | 1 | 1 | The value of alarm hysteresis for this input. The input reading must decrease or increase by this value before the alarm will cle… |