Vendor: Quantum Bridge
Module: QBSYS-SYSTEM-MIB
[Automatically extracted from oidview.com]
qbSysGeneralGroup OBJECT IDENTIFIER ::= { qbSysObjects 1 }
qbSysGeneralGroup OBJECT IDENTIFIER ::= { qbSysObjects 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4323.2.2.1.1.1 | qbSysDateTime | 1 | 1 | The current date and time of the system. Note that this can also be used to set and reset the current date and time. |
| 1.3.6.1.4.1.4323.2.2.1.1.2 | qbSysOperStatus | 1 | 1 | The current operational status of the Quantum Bridge IOAS System as a whole. A value 'unknown(1)' indicates that the current sta… |
| 1.3.6.1.4.1.4323.2.2.1.1.3 | qbSysResetCtl | 1 | 1 | This is the 'software reset button' of the agent. When read, this object always returns the value 'ready(1)'. When set to 'reset(… |
| 1.3.6.1.4.1.4323.2.2.1.1.4 | qbSysBootDiagsCode | 1 | 1 | An error code giving more details about a boot diagnostics failure indicated by qbSysOperStatus 'warning(1)' or 'down(2)'. The va… |
| 1.3.6.1.4.1.4323.2.2.1.1.5 | qbSysWatchdogUpdate | 1 | 1 | The number of seconds between watchdog timer updates. A watch dog reset will occur if the timer is not updated within one cycle.… |
| 1.3.6.1.4.1.4323.2.2.1.1.6 | qbSysRunningImageVersion | 1 | 1 | The running image version. |
| 1.3.6.1.4.1.4323.2.2.1.1.7 | qbSysPowerSupplyType | 1 | 1 | The type of power supply. |
| 1.3.6.1.4.1.4323.2.2.1.1.8 | qbSysAcoCtl | 1 | 1 | The object allows to set the ACO (alarm cut off) function. When is set to clear(2) will turn off the ACO LED and supress visible … |
| 1.3.6.1.4.1.4323.2.2.1.1.9 | qbSysAutonomousStatus | 1 | 1 | The object enables or disables alarms at the CLI (when a user logged in). If on, autonomous alarms will display at CLI. If off, t… |
| 1.3.6.1.4.1.4323.2.2.1.1.10 | qbSysDiscreteInputTable | 1 | 5 | A list of discrete inputs entries. This table contains information specifying discrete inputs that are configured for this system… |
| 1.3.6.1.4.1.4323.2.2.1.1.11 | qbSysAgentGroup | 10 | 25 | None |
| 1.3.6.1.4.1.4323.2.2.1.1.12 | qbSysFileGroup | 2 | 17 | None |
| 1.3.6.1.4.1.4323.2.2.1.1.13 | qbSysResetVersion | 1 | 1 | The version used by the system controller when remotely reset. |
| 1.3.6.1.4.1.4323.2.2.1.1.14 | qbSysFeatureKeys | 1 | 1 | inidcates which features of OAS software are administratively enabled on this system. If a bit is set, then the corresponding fea… |
| 1.3.6.1.4.1.4323.2.2.1.1.15 | qbSysPortBwSharing | 1 | 1 | This object shows and controls the bandwidth allocation between Au-1 and au-2. If it is set to 622, then there is no port sharin… |
| 1.3.6.1.4.1.4323.2.2.1.1.16 | qbSysTestLeds | 1 | 1 | This object tests the system LEDs. If the object is read it should return ready. Setting the value test will initiate the LED te… |
| 1.3.6.1.4.1.4323.2.2.1.1.17 | qbSysSwAccepted | 1 | 1 | if true, the software in the switch is accepted. |
| 1.3.6.1.4.1.4323.2.2.1.1.18 | qbChassisSysType | 1 | 1 | The chassis system type. |
| 1.3.6.1.4.1.4323.2.2.1.1.19 | qbChassisBkplType | 1 | 1 | The chassis backplane type. |
| 1.3.6.1.4.1.4323.2.2.1.1.20 | qbChassisNumSlots | 1 | 1 | The number of slots in the chassis available for plug-in modules. QB3000 contains 7 slots, QB5000 contains 15 slots |
| 1.3.6.1.4.1.4323.2.2.1.1.21 | qbChassisBulkStatsCtl | 1 | 1 | The object allows to enable and disable bulk statistics collection on the OAS. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4323.2.2.1.2 | qbSysConfigParamsGroup | 3 | 6 | None |
| 1.3.6.1.4.1.4323.2.2.1.3 | qbSysEventsGroup | 21 | 86 | None |
| 1.3.6.1.4.1.4323.2.2.1.4 | qbSysModuleGroup | 3 | 30 | None |
| 1.3.6.1.4.1.4323.2.2.1.5 | qbSysPortGroup | 1 | 8 | None |
| 1.3.6.1.4.1.4323.2.2.1.6 | qbSysIotGroup | 2 | 34 | None |
| 1.3.6.1.4.1.4323.2.2.1.7 | qbSysInterfacesGroup | 1 | 7 | None |