The object allows to set the ACO (alarm cut off) function. When
is set to clear(2) will turn off the ACO LED and
supress visible alarms.Functionally it is equivalent
to pushing the ACO button. Any new alarm causes the ACO button
LED to illuminate. When read, this object always returns the value 'on(1)'
Parsed from file qbsystem.mib.txt
Company: None
Module: QBSYS-SYSTEM-MIB
The object allows to set the ACO (alarm cut off) function. When
is set to clear(2) will turn off the ACO LED and
supress visible alarms.Functionally it is equivalent
to pushing the ACO button. Any new alarm causes the ACO button
LED to illuminate. When read, this object always returns the value 'on(1)'
Parsed from file QBSYS-SYSTEM-MIB.mib
Module: QBSYS-SYSTEM-MIB
Vendor: Quantum Bridge
Module: QBSYS-SYSTEM-MIB
[Automatically extracted from oidview.com]
qbSysAcoCtl OBJECT-TYPE SYNTAX INTEGER { on(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The object allows to set the ACO (alarm cut off) function. When is set to clear(2) will turn off the ACO LED and supress visible alarms.Functionally it is equivalent to pushing the ACO button. Any new alarm causes the ACO button LED to illuminate. When read, this object always returns the value 'on(1)'" ::= { qbSysGeneralGroup 8 }
qbSysAcoCtl OBJECT-TYPE SYNTAX INTEGER { on(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The object allows to set the ACO (alarm cut off) function. When is set to clear(2) will turn off the ACO LED and supress visible alarms.Functionally it is equivalent to pushing the ACO button. Any new alarm causes the ACO button LED to illuminate. When read, this object always returns the value 'on(1)'" ::= { qbSysGeneralGroup 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4323.2.2.1.1.8.0 | qbSysAcoCtl | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4323.2.2.1.1.1 | qbSysDateTime | 1 | 1 | The current date and time of the system. Note that this can also be used to set and reset the current date and time. |
| 1.3.6.1.4.1.4323.2.2.1.1.2 | qbSysOperStatus | 1 | 1 | The current operational status of the Quantum Bridge IOAS System as a whole. A value 'unknown(1)' indicates that the current sta… |
| 1.3.6.1.4.1.4323.2.2.1.1.3 | qbSysResetCtl | 1 | 1 | This is the 'software reset button' of the agent. When read, this object always returns the value 'ready(1)'. When set to 'reset(… |
| 1.3.6.1.4.1.4323.2.2.1.1.4 | qbSysBootDiagsCode | 1 | 1 | An error code giving more details about a boot diagnostics failure indicated by qbSysOperStatus 'warning(1)' or 'down(2)'. The va… |
| 1.3.6.1.4.1.4323.2.2.1.1.5 | qbSysWatchdogUpdate | 1 | 1 | The number of seconds between watchdog timer updates. A watch dog reset will occur if the timer is not updated within one cycle.… |
| 1.3.6.1.4.1.4323.2.2.1.1.6 | qbSysRunningImageVersion | 1 | 1 | The running image version. |
| 1.3.6.1.4.1.4323.2.2.1.1.7 | qbSysPowerSupplyType | 1 | 1 | The type of power supply. |
| 1.3.6.1.4.1.4323.2.2.1.1.9 | qbSysAutonomousStatus | 1 | 1 | The object enables or disables alarms at the CLI (when a user logged in). If on, autonomous alarms will display at CLI. If off, t… |
| 1.3.6.1.4.1.4323.2.2.1.1.10 | qbSysDiscreteInputTable | 1 | 5 | A list of discrete inputs entries. This table contains information specifying discrete inputs that are configured for this system… |
| 1.3.6.1.4.1.4323.2.2.1.1.11 | qbSysAgentGroup | 10 | 25 | None |
| 1.3.6.1.4.1.4323.2.2.1.1.12 | qbSysFileGroup | 2 | 17 | None |
| 1.3.6.1.4.1.4323.2.2.1.1.13 | qbSysResetVersion | 1 | 1 | The version used by the system controller when remotely reset. |
| 1.3.6.1.4.1.4323.2.2.1.1.14 | qbSysFeatureKeys | 1 | 1 | inidcates which features of OAS software are administratively enabled on this system. If a bit is set, then the corresponding fea… |
| 1.3.6.1.4.1.4323.2.2.1.1.15 | qbSysPortBwSharing | 1 | 1 | This object shows and controls the bandwidth allocation between Au-1 and au-2. If it is set to 622, then there is no port sharin… |
| 1.3.6.1.4.1.4323.2.2.1.1.16 | qbSysTestLeds | 1 | 1 | This object tests the system LEDs. If the object is read it should return ready. Setting the value test will initiate the LED te… |
| 1.3.6.1.4.1.4323.2.2.1.1.17 | qbSysSwAccepted | 1 | 1 | if true, the software in the switch is accepted. |
| 1.3.6.1.4.1.4323.2.2.1.1.18 | qbChassisSysType | 1 | 1 | The chassis system type. |
| 1.3.6.1.4.1.4323.2.2.1.1.19 | qbChassisBkplType | 1 | 1 | The chassis backplane type. |
| 1.3.6.1.4.1.4323.2.2.1.1.20 | qbChassisNumSlots | 1 | 1 | The number of slots in the chassis available for plug-in modules. QB3000 contains 7 slots, QB5000 contains 15 slots |
| 1.3.6.1.4.1.4323.2.2.1.1.21 | qbChassisBulkStatsCtl | 1 | 1 | The object allows to enable and disable bulk statistics collection on the OAS. |