Vendor: Quantum Bridge
Module: QBSYS-SYSTEM-MIB
[Automatically extracted from oidview.com]
qbSysAgentGroup OBJECT IDENTIFIER ::= { qbSysGeneralGroup 11 }
qbSysAgentGroup OBJECT IDENTIFIER ::= { qbSysGeneralGroup 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4323.2.2.1.1.11.1 | qbSysSnmpRevision | 1 | 1 | The revision number of the SNMP agent implementation. The first two bytes indicate major revision number, the second two bytes in… |
| 1.3.6.1.4.1.4323.2.2.1.1.11.2 | qbSysMgmtIpAddr | 1 | 1 | Active IP Address for SNMP Management of this chassis. This is the IP address used for network mangement. |
| 1.3.6.1.4.1.4323.2.2.1.1.11.3 | qbSysMgmtIpMask | 1 | 1 | This is the IP network mask associated with the Management interface. |
| 1.3.6.1.4.1.4323.2.2.1.1.11.4 | qbSysDefaultIpRouter | 1 | 1 | This is a machine, connected to the same subnet as the sysctl management interface, which is capable of routing IP packets |
| 1.3.6.1.4.1.4323.2.2.1.1.11.5 | qbSysAgentReadCommunity | 1 | 1 | This object is the read community string for the SNMP, see RFC1157. |
| 1.3.6.1.4.1.4323.2.2.1.1.11.6 | qbSysAgentReadWriteCommunity | 1 | 1 | This object is the read-write community string for the SNMP,see RFC1157. The read-write community string is required to modify t… |
| 1.3.6.1.4.1.4323.2.2.1.1.11.7 | qbSysAgentTrapDestTable | 1 | 6 | This table contains information specifying which traps will be transmitted to a given destination address. The table is indexed … |
| 1.3.6.1.4.1.4323.2.2.1.1.11.8 | qbSysDefaultRouterType | 1 | 1 | This indicates the kind of the management port associated with the default gateway. |
| 1.3.6.1.4.1.4323.2.2.1.1.11.9 | qbSysCliMsgCode | 1 | 1 | This object is the read-write community string for the SNMP,see RFC1157. The read-write community string is required to modify t… |
| 1.3.6.1.4.1.4323.2.2.1.1.11.10 | qbRIPConfig | 1 | 1 | This is a singular object in qbSysAgentGroup and is for enabling or disabling RIP Configuration system wide |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4323.2.2.1.1.1 | qbSysDateTime | 1 | 1 | The current date and time of the system. Note that this can also be used to set and reset the current date and time. |
| 1.3.6.1.4.1.4323.2.2.1.1.2 | qbSysOperStatus | 1 | 1 | The current operational status of the Quantum Bridge IOAS System as a whole. A value 'unknown(1)' indicates that the current sta… |
| 1.3.6.1.4.1.4323.2.2.1.1.3 | qbSysResetCtl | 1 | 1 | This is the 'software reset button' of the agent. When read, this object always returns the value 'ready(1)'. When set to 'reset(… |
| 1.3.6.1.4.1.4323.2.2.1.1.4 | qbSysBootDiagsCode | 1 | 1 | An error code giving more details about a boot diagnostics failure indicated by qbSysOperStatus 'warning(1)' or 'down(2)'. The va… |
| 1.3.6.1.4.1.4323.2.2.1.1.5 | qbSysWatchdogUpdate | 1 | 1 | The number of seconds between watchdog timer updates. A watch dog reset will occur if the timer is not updated within one cycle.… |
| 1.3.6.1.4.1.4323.2.2.1.1.6 | qbSysRunningImageVersion | 1 | 1 | The running image version. |
| 1.3.6.1.4.1.4323.2.2.1.1.7 | qbSysPowerSupplyType | 1 | 1 | The type of power supply. |
| 1.3.6.1.4.1.4323.2.2.1.1.8 | qbSysAcoCtl | 1 | 1 | The object allows to set the ACO (alarm cut off) function. When is set to clear(2) will turn off the ACO LED and supress visible … |
| 1.3.6.1.4.1.4323.2.2.1.1.9 | qbSysAutonomousStatus | 1 | 1 | The object enables or disables alarms at the CLI (when a user logged in). If on, autonomous alarms will display at CLI. If off, t… |
| 1.3.6.1.4.1.4323.2.2.1.1.10 | qbSysDiscreteInputTable | 1 | 5 | A list of discrete inputs entries. This table contains information specifying discrete inputs that are configured for this system… |
| 1.3.6.1.4.1.4323.2.2.1.1.12 | qbSysFileGroup | 2 | 17 | None |
| 1.3.6.1.4.1.4323.2.2.1.1.13 | qbSysResetVersion | 1 | 1 | The version used by the system controller when remotely reset. |
| 1.3.6.1.4.1.4323.2.2.1.1.14 | qbSysFeatureKeys | 1 | 1 | inidcates which features of OAS software are administratively enabled on this system. If a bit is set, then the corresponding fea… |
| 1.3.6.1.4.1.4323.2.2.1.1.15 | qbSysPortBwSharing | 1 | 1 | This object shows and controls the bandwidth allocation between Au-1 and au-2. If it is set to 622, then there is no port sharin… |
| 1.3.6.1.4.1.4323.2.2.1.1.16 | qbSysTestLeds | 1 | 1 | This object tests the system LEDs. If the object is read it should return ready. Setting the value test will initiate the LED te… |
| 1.3.6.1.4.1.4323.2.2.1.1.17 | qbSysSwAccepted | 1 | 1 | if true, the software in the switch is accepted. |
| 1.3.6.1.4.1.4323.2.2.1.1.18 | qbChassisSysType | 1 | 1 | The chassis system type. |
| 1.3.6.1.4.1.4323.2.2.1.1.19 | qbChassisBkplType | 1 | 1 | The chassis backplane type. |
| 1.3.6.1.4.1.4323.2.2.1.1.20 | qbChassisNumSlots | 1 | 1 | The number of slots in the chassis available for plug-in modules. QB3000 contains 7 slots, QB5000 contains 15 slots |
| 1.3.6.1.4.1.4323.2.2.1.1.21 | qbChassisBulkStatsCtl | 1 | 1 | The object allows to enable and disable bulk statistics collection on the OAS. |