The reason for the last switch card switchover.
The value is none(1) if there has been no switchover since
agent initialization.
Parsed from file qbsystem.mib.txt
Company: None
Module: QBSYS-SYSTEM-MIB
The reason for the last switch card switchover.
The value is none(1) if there has been no switchover since
agent initialization.
Parsed from file QBSYS-SYSTEM-MIB.mib
Module: QBSYS-SYSTEM-MIB
Vendor: Quantum Bridge
Module: QBSYS-SYSTEM-MIB
[Automatically extracted from oidview.com]
qbSysModuleSwitchoverReason OBJECT-TYPE SYNTAX INTEGER { none(1), unknown(2), userInitiated(3), moduleFailed(4), moduleRecovered(5), moduleRemoved(6), moduleInserted(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The reason for the last switch card switchover. The value is none(1) if there has been no switchover since agent initialization." ::= { qbSysModuleEntry 16 }
qbSysModuleSwitchoverReason OBJECT-TYPE SYNTAX INTEGER { none(1), unknown(2), userInitiated(3), moduleFailed(4), moduleRecovered(5), moduleRemoved(6), moduleInserted(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The reason for the last switch card switchover. The value is none(1) if there has been no switchover since agent initialization." ::= { qbSysModuleEntry 16 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.1 | qbSysModuleSlot | 0 | 0 | This value is determined by the OAS slot number where the module is located. Valid range is from 1 to 15 for QB5000 and from 1 t… |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.2 | qbSysModuleType | 0 | 0 | The module type. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.3 | qbSysModuleName | 0 | 0 | A descriptive string used by network administrator to name the module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.4 | qbSysModuleOperStatus | 0 | 0 | The operational status of the module. If the status is not ok, the value of the moduleTestResult gives more detailed information… |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.5 | qbSysModuleAdminStatus | 0 | 0 | This object, when read, returns one of the following results: other(1): module permanently enabled enable(3): module currently … |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.6 | qbSysModuleTestResult | 0 | 0 | The result of the module's self test. A zero indicates that the module passed all tests. Bits set in the result indicate error … |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.7 | qbSysModuleNumPorts | 0 | 0 | The number of ports supported by the module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.8 | qbSysModulePortStatus | 0 | 0 | A series of bytes containing status information about the module and each of the ports in the module. The first byte contains the… |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.9 | qbSysModuleModel | 0 | 0 | The manufacturer's model part number for the module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.10 | qbSysModuleSerialNum | 0 | 0 | The manufacturer's serial number for the module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.11 | qbSysModuleEqId | 0 | 0 | The manufacturer's equipment identifier. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.12 | qbSysModuleHwVersion | 0 | 0 | The hardware version of the module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.13 | qbSysModuleSwVersion | 0 | 0 | The software version of the module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.14 | qbSysModuleProtectionMode | 0 | 0 | Protection mode of a module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.15 | qbSysModuleLastSwitchoverTime | 0 | 0 | The value of sysUpTime at the last switchover of the switch cards. The value is zero if there has been no switchover since agent i… |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.17 | qbSysModuleLedStatus | 0 | 0 | Led OCTET String A series of bytes containing status information about each of leds in the module. For every led two bytes are all… |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.18 | qbSysModuleProductName | 0 | 0 | A descriptive string used by vendor to name the module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.19 | qbSysModuleTestLeds | 0 | 0 | This object tests the module LEDs. If the object is read, it should return ready. Setting the value test will initiate the LED te… |