Led OCTET String
A series of bytes containing status information
about each of leds in the module. For every led
two bytes are allocated. The first byte indicates the led type,
the second byte indicates the led state (on/off).
Therefore byte string size
is different depending of the module
types. The leds of modules as follows:
SYSCON:
1 CR(0)
2 MJ(1)
3 MN(2)
4 MNTC(3)
5 Fault(4)
6 ACO(5)
SWITCH/SWPROC -
1 FAULT(1)
2 ACTIVE(2)
WAN/MOC12
1 FAULT(0)
2 ACTIVE(1)
3 LOS(2)
AU-1
1 FAULT(0)
2 ACTIVE(1)
3 LOS(2)
Parsed from file qbsystem.mib.txt
Company: None
Module: QBSYS-SYSTEM-MIB
Led OCTET String
A series of bytes containing status information
about each of leds in the module. For every led
two bytes are allocated. The first byte indicates the led type,
the second byte indicates the led state (on/off).
Therefore byte string size
is different depending of the module
types. The leds of modules as follows:
SYSCON:
1 CR(0)
2 MJ(1)
3 MN(2)
4 MNTC(3)
5 Fault(4)
6 ACO(5)
SWITCH/SWPROC -
1 FAULT(1)
2 ACTIVE(2)
WAN/MOC12
1 FAULT(0)
2 ACTIVE(1)
3 LOS(2)
AU-1
1 FAULT(0)
2 ACTIVE(1)
3 LOS(2)
Parsed from file QBSYS-SYSTEM-MIB.mib
Module: QBSYS-SYSTEM-MIB
Vendor: Quantum Bridge
Module: QBSYS-SYSTEM-MIB
[Automatically extracted from oidview.com]
qbSysModuleLedStatus OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "Led OCTET String A series of bytes containing status information about each of leds in the module. For every led two bytes are allocated. The first byte indicates the led type, the second byte indicates the led state (on/off). Therefore byte string size is different depending of the module types. The leds of modules as follows: SYSCON: 1 CR(0) 2 MJ(1) 3 MN(2) 4 MNTC(3) 5 Fault(4) 6 ACO(5) SWITCH/SWPROC - 1 FAULT(1) 2 ACTIVE(2) WAN/MOC12 1 FAULT(0) 2 ACTIVE(1) 3 LOS(2) AU-1 1 FAULT(0) 2 ACTIVE(1) 3 LOS(2) " ::= { qbSysModuleEntry 17 }
qbSysModuleLedStatus OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "Led OCTET String A series of bytes containing status information about each of leds in the module. For every led two bytes are allocated. The first byte indicates the led type, the second byte indicates the led state (on/off). Therefore byte string size is different depending of the module types. The leds of modules as follows: SYSCON: 1 CR(0) 2 MJ(1) 3 MN(2) 4 MNTC(3) 5 Fault(4) 6 ACO(5) SWITCH/SWPROC - 1 FAULT(1) 2 ACTIVE(2) WAN/MOC12 1 FAULT(0) 2 ACTIVE(1) 3 LOS(2) AU-1 1 FAULT(0) 2 ACTIVE(1) 3 LOS(2) " ::= { qbSysModuleEntry 17 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.1 | qbSysModuleSlot | 0 | 0 | This value is determined by the OAS slot number where the module is located. Valid range is from 1 to 15 for QB5000 and from 1 t… |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.2 | qbSysModuleType | 0 | 0 | The module type. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.3 | qbSysModuleName | 0 | 0 | A descriptive string used by network administrator to name the module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.4 | qbSysModuleOperStatus | 0 | 0 | The operational status of the module. If the status is not ok, the value of the moduleTestResult gives more detailed information… |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.5 | qbSysModuleAdminStatus | 0 | 0 | This object, when read, returns one of the following results: other(1): module permanently enabled enable(3): module currently … |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.6 | qbSysModuleTestResult | 0 | 0 | The result of the module's self test. A zero indicates that the module passed all tests. Bits set in the result indicate error … |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.7 | qbSysModuleNumPorts | 0 | 0 | The number of ports supported by the module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.8 | qbSysModulePortStatus | 0 | 0 | A series of bytes containing status information about the module and each of the ports in the module. The first byte contains the… |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.9 | qbSysModuleModel | 0 | 0 | The manufacturer's model part number for the module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.10 | qbSysModuleSerialNum | 0 | 0 | The manufacturer's serial number for the module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.11 | qbSysModuleEqId | 0 | 0 | The manufacturer's equipment identifier. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.12 | qbSysModuleHwVersion | 0 | 0 | The hardware version of the module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.13 | qbSysModuleSwVersion | 0 | 0 | The software version of the module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.14 | qbSysModuleProtectionMode | 0 | 0 | Protection mode of a module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.15 | qbSysModuleLastSwitchoverTime | 0 | 0 | The value of sysUpTime at the last switchover of the switch cards. The value is zero if there has been no switchover since agent i… |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.16 | qbSysModuleSwitchoverReason | 0 | 0 | The reason for the last switch card switchover. The value is none(1) if there has been no switchover since agent initialization. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.18 | qbSysModuleProductName | 0 | 0 | A descriptive string used by vendor to name the module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.19 | qbSysModuleTestLeds | 0 | 0 | This object tests the module LEDs. If the object is read, it should return ready. Setting the value test will initiate the LED te… |