This object, when read, returns one of the
following results:
other(1): module permanently enabled
enable(3): module currently enabled
disable(4): module currently disabled
clearslot(5): used to clear slot
Setting this object to one of the acceptable values
gives the following results:
other(1): gives an error
reset(2): resets the module
enable(3): if the module status is configurable,
enables the module, else gives error
disable(4): if the module status is configurable,
disables the module, else gives error
Setting this object to any other value results in
an error. Note that, currently, this object 'readonly'
Parsed from file qbsystem.mib.txt
Company: None
Module: QBSYS-SYSTEM-MIB
This object, when read, returns one of the
following results:
other(1): module permanently enabled
enable(3): module currently enabled
disable(4): module currently disabled
clearslot(5): used to clear slot
Setting this object to one of the acceptable values
gives the following results:
other(1): gives an error
reset(2): resets the module
enable(3): if the module status is configurable,
enables the module, else gives error
disable(4): if the module status is configurable,
disables the module, else gives error
Setting this object to any other value results in
an error. Note that, currently, this object 'readonly'
Parsed from file QBSYS-SYSTEM-MIB.mib
Module: QBSYS-SYSTEM-MIB
Vendor: Quantum Bridge
Module: QBSYS-SYSTEM-MIB
[Automatically extracted from oidview.com]
qbSysModuleAdminStatus OBJECT-TYPE SYNTAX INTEGER { other(1), reset(2), enable(3), disable(4), clearslot(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object, when read, returns one of the following results: other(1): module permanently enabled enable(3): module currently enabled disable(4): module currently disabled clearslot(5): used to clear slot Setting this object to one of the acceptable values gives the following results: other(1): gives an error reset(2): resets the module enable(3): if the module status is configurable, enables the module, else gives error disable(4): if the module status is configurable, disables the module, else gives error Setting this object to any other value results in an error. Note that, currently, this object 'readonly'" ::= { qbSysModuleEntry 5 }
qbSysModuleAdminStatus OBJECT-TYPE SYNTAX INTEGER { other(1), reset(2), enable(3), disable(4), clearslot(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object, when read, returns one of the following results: other(1): module permanently enabled enable(3): module currently enabled disable(4): module currently disabled clearslot(5): used to clear slot Setting this object to one of the acceptable values gives the following results: other(1): gives an error reset(2): resets the module enable(3): if the module status is configurable, enables the module, else gives error disable(4): if the module status is configurable, disables the module, else gives error Setting this object to any other value results in an error. Note that, currently, this object 'readonly'" ::= { qbSysModuleEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.1 | qbSysModuleSlot | 0 | 0 | This value is determined by the OAS slot number where the module is located. Valid range is from 1 to 15 for QB5000 and from 1 t… |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.2 | qbSysModuleType | 0 | 0 | The module type. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.3 | qbSysModuleName | 0 | 0 | A descriptive string used by network administrator to name the module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.4 | qbSysModuleOperStatus | 0 | 0 | The operational status of the module. If the status is not ok, the value of the moduleTestResult gives more detailed information… |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.6 | qbSysModuleTestResult | 0 | 0 | The result of the module's self test. A zero indicates that the module passed all tests. Bits set in the result indicate error … |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.7 | qbSysModuleNumPorts | 0 | 0 | The number of ports supported by the module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.8 | qbSysModulePortStatus | 0 | 0 | A series of bytes containing status information about the module and each of the ports in the module. The first byte contains the… |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.9 | qbSysModuleModel | 0 | 0 | The manufacturer's model part number for the module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.10 | qbSysModuleSerialNum | 0 | 0 | The manufacturer's serial number for the module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.11 | qbSysModuleEqId | 0 | 0 | The manufacturer's equipment identifier. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.12 | qbSysModuleHwVersion | 0 | 0 | The hardware version of the module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.13 | qbSysModuleSwVersion | 0 | 0 | The software version of the module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.14 | qbSysModuleProtectionMode | 0 | 0 | Protection mode of a module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.15 | qbSysModuleLastSwitchoverTime | 0 | 0 | The value of sysUpTime at the last switchover of the switch cards. The value is zero if there has been no switchover since agent i… |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.16 | qbSysModuleSwitchoverReason | 0 | 0 | The reason for the last switch card switchover. The value is none(1) if there has been no switchover since agent initialization. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.17 | qbSysModuleLedStatus | 0 | 0 | Led OCTET String A series of bytes containing status information about each of leds in the module. For every led two bytes are all… |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.18 | qbSysModuleProductName | 0 | 0 | A descriptive string used by vendor to name the module. |
| 1.3.6.1.4.1.4323.2.2.1.4.1.1.19 | qbSysModuleTestLeds | 0 | 0 | This object tests the module LEDs. If the object is read, it should return ready. Setting the value test will initiate the LED te… |