Represents the TSID value for the QAM channel of this
M-CMTS Downstream Interface.
The value '0' indicates no TSID is being configured in the
EQAM device for this interface entry.
Represents the TSID value for the QAM channel of this
M-CMTS Downstream Interface.
The value '0' indicates no TSID is being configured in the
EQAM device for this interface entry.
Parsed from file DOCS-IF-M-CMTS-MIB.my.txt
Company: None
Module: DOCS-IF-M-CMTS-MIB
Represents the TSID value for the QAM channel of this
M-CMTS Downstream Interface.
The value '0' indicates no TSID is being configured in the
EQAM device for this interface entry.
docsIfMCmtsEqamDownstreamTSID OBJECT-TYPE SYNTAX Gauge(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Represents the TSID value for the QAM channel of this M-CMTS Downstream Interface. The value '0' indicates no TSID is being configured in the EQAM device for this interface entry." ::= { docsIfMCmtsEqamDownstreamEntry 1 }
Vendor: Cable Television Laboratories, Inc.
Module: DOCS-IF-M-CMTS-MIB
[Automatically extracted from oidview.com]
docsIfMCmtsEqamDownstreamTSID OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the TSID value for the QAM channel of this M-CMTS Downstream Interface. The value '0' indicates no TSID is being configured in the EQAM device for this interface entry." ::= { docsIfMCmtsEqamDownstreamEntry 1 }
docsIfMCmtsEqamDownstreamTSID OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the TSID value for the QAM channel of this M-CMTS Downstream Interface. The value '0' indicates no TSID is being configured in the EQAM device for this interface entry." ::= { docsIfMCmtsEqamDownstreamEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.2 | docsIfMCmtsEqamDownstreamPhyDependencies | 0 | 0 | The summary of the M-CMTS Downstream Interface dependencies based on the constraints of docsIfMCmtsEqamGroupDependencyEntry. A BIT… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.3 | docsIfMCmtsEqamDownstreamDevicePhyParamLock | 0 | 0 | Indicates if by design the QAM Channel is directly configurable. This BIT set is derived from the dependency group a QAM channel … |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.4 | docsIfMCmtsEqamDownstreamDeviceConfigPhyParamLock | 0 | 0 | Administrative configuration of lock bits for EQAM channels PHY parameters. A BIT set of this object is meaningful when the same … |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.5 | docsIfMCmtsEqamDownstreamAllocationType | 0 | 0 | Indicates the mechanisms authorized to reserve and control this M-CMTS Downstream interface. When configured to 'docsisOnly' indi… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.6 | docsIfMCmtsEqamDownstreamAllocationStatus | 0 | 0 | Indicates the service(s) the M-CMTS Downstream Interface is allocated for. 'other' BIT set to '1' indicates the resource is curre… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.7 | docsIfMCmtsEqamDownstreamAllocationTimeout | 0 | 0 | Indicates the number of seconds the EQAM device waits before advertising the QAM channel resource is idle and/or accepting a sess… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.8 | docsIfMCmtsEqamDownstreamDRRPAdvertizing | 0 | 0 | Indicates when a QAM channel resource should be advertised via DRRP (DOCSIS Resource Registration Protocol) to an Edge Resource M… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.9 | docsIfMCmtsEqamDownstreamUdpPortMapping | 0 | 0 | The UDP Port within a L2TPv3 Session PDU the EQAM uses to map DEPI flows to the EQAM channels associated to this table entry. When… |