The UDP Port within a L2TPv3 Session PDU the EQAM uses
to map DEPI flows to the EQAM channels associated to this
table entry.
When the EQAM device does not support UDP port mapping to
DEPI flows, this object reports the value 1701 (the default
UDP port when M-CMTS Initiates a DEPI session with L2TPv3
header over UDP).
The UDP Port within a L2TPv3 Session PDU the EQAM uses
to map DEPI flows to the EQAM channels associated to this
table entry.
When the EQAM device does not support UDP port mapping to
DEPI flows, this object reports the value 1701 (the default
UDP port when M-CMTS Initiates a DEPI session with L2TPv3
header over UDP).
Parsed from file DOCS-IF-M-CMTS-MIB.my.txt
Company: None
Module: DOCS-IF-M-CMTS-MIB
The UDP Port within a L2TPv3 Session PDU the EQAM uses
to map DEPI flows to the EQAM channels associated to this
table entry.
When the EQAM device does not support UDP port mapping to
DEPI flows, this object reports the value 1701 (the default
UDP port when M-CMTS Initiates a DEPI session with L2TPv3
header over UDP).
docsIfMCmtsEqamDownstreamUdpPortMapping OBJECT-TYPE SYNTAX InetPortNumber ACCESS read-only STATUS mandatory DESCRIPTION "The UDP Port within a L2TPv3 Session PDU the EQAM uses to map DEPI flows to the EQAM channels associated to this table entry. When the EQAM device does not support UDP port mapping to DEPI flows, this object reports the value 1701 (the default UDP port when M-CMTS Initiates a DEPI session with L2TPv3 header over UDP)." ::= { docsIfMCmtsEqamDownstreamEntry 9 }
Vendor: Cable Television Laboratories, Inc.
Module: DOCS-IF-M-CMTS-MIB
[Automatically extracted from oidview.com]
docsIfMCmtsEqamDownstreamUdpPortMapping OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The UDP Port within a L2TPv3 Session PDU the EQAM uses to map DEPI flows to the EQAM channels associated to this table entry. When the EQAM device does not support UDP port mapping to DEPI flows, this object reports the value 1701 (the default UDP port when M-CMTS Initiates a DEPI session with L2TPv3 header over UDP)." ::= { docsIfMCmtsEqamDownstreamEntry 9 }
docsIfMCmtsEqamDownstreamUdpPortMapping OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The UDP Port within a L2TPv3 Session PDU the EQAM uses to map DEPI flows to the EQAM channels associated to this table entry. When the EQAM device does not support UDP port mapping to DEPI flows, this object reports the value 1701 (the default UDP port when M-CMTS Initiates a DEPI session with L2TPv3 header over UDP)." ::= { docsIfMCmtsEqamDownstreamEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.1 | docsIfMCmtsEqamDownstreamTSID | 0 | 0 | Represents the TSID value for the QAM channel of this M-CMTS Downstream Interface. The value '0' indicates no TSID is being confi… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.2 | docsIfMCmtsEqamDownstreamPhyDependencies | 0 | 0 | The summary of the M-CMTS Downstream Interface dependencies based on the constraints of docsIfMCmtsEqamGroupDependencyEntry. A BIT… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.3 | docsIfMCmtsEqamDownstreamDevicePhyParamLock | 0 | 0 | Indicates if by design the QAM Channel is directly configurable. This BIT set is derived from the dependency group a QAM channel … |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.4 | docsIfMCmtsEqamDownstreamDeviceConfigPhyParamLock | 0 | 0 | Administrative configuration of lock bits for EQAM channels PHY parameters. A BIT set of this object is meaningful when the same … |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.5 | docsIfMCmtsEqamDownstreamAllocationType | 0 | 0 | Indicates the mechanisms authorized to reserve and control this M-CMTS Downstream interface. When configured to 'docsisOnly' indi… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.6 | docsIfMCmtsEqamDownstreamAllocationStatus | 0 | 0 | Indicates the service(s) the M-CMTS Downstream Interface is allocated for. 'other' BIT set to '1' indicates the resource is curre… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.7 | docsIfMCmtsEqamDownstreamAllocationTimeout | 0 | 0 | Indicates the number of seconds the EQAM device waits before advertising the QAM channel resource is idle and/or accepting a sess… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.8 | docsIfMCmtsEqamDownstreamDRRPAdvertizing | 0 | 0 | Indicates when a QAM channel resource should be advertised via DRRP (DOCSIS Resource Registration Protocol) to an Edge Resource M… |