Indicates if by design the QAM Channel is directly
configurable. This BIT set is derived from the
dependency group a QAM channel belongs where
docsIfMCmtsEqamGroupDependencyType is equal to
docsPHYParamFixValue
When a specific BIT is set to '1', the PHY parameter
in docsIfMCmtsDepiSessionConfigTable is locked for SNMP
SETs, returning 'notWritable' on SET attempts.
When a specific BIT is set to '0', the PHY parameter
in docsIfMCmtsDepiSessionConfigTable is processed.
Note that when a BIT is set to '0' an SNMP SET as described
above may affect the PHY parameter in other QAM channels
as described in docsIfMCmtsEqamGroupDependencyTable
or rejected with error 'wrongValue' based on the constrains
indicated by the EQAM capabilities
docsIfMCmtsEqamDownstreamCapabilitiesTable of
DOCS-If-M-CMTS-MIB.
This object contains information that is used to signal
'lock' PHY parameters to other entities via interfaces such
as DEPI and ERMI.
Indicates if by design the QAM Channel is directly
configurable. This BIT set is derived from the
dependency group a QAM channel belongs where
docsIfMCmtsEqamGroupDependencyType is equal to
docsPHYParamFixValue
When a specific BIT is set to '1', the PHY parameter
in docsIfMCmtsDepiSessionConfigTable is locked for SNMP
SETs, returning 'notWritable' on SET attempts.
When a specific BIT is set to '0', the PHY parameter
in docsIfMCmtsDepiSessionConfigTable is processed.
Note that when a BIT is set to '0' an SNMP SET as described
above may affect the PHY parameter in other QAM channels
as described in docsIfMCmtsEqamGroupDependencyTable
or rejected with error 'wrongValue' based on the constrains
indicated by the EQAM capabilities
docsIfMCmtsEqamDownstreamCapabilitiesTable of
DOCS-If-M-CMTS-MIB.
This object contains information that is used to signal
'lock' PHY parameters to other entities via interfaces such
as DEPI and ERMI.
Parsed from file DOCS-IF-M-CMTS-MIB.my.txt
Company: None
Module: DOCS-IF-M-CMTS-MIB
Indicates if by design the QAM Channel is directly
configurable. This BIT set is derived from the
dependency group a QAM channel belongs where
docsIfMCmtsEqamGroupDependencyType is equal to
docsPHYParamFixValue
When a specific BIT is set to '1', the PHY parameter
in docsIfMCmtsDepiSessionConfigTable is locked for SNMP
SETs, returning 'notWritable' on SET attempts.
When a specific BIT is set to '0', the PHY parameter
in docsIfMCmtsDepiSessionConfigTable is processed.
Note that when a BIT is set to '0' an SNMP SET as described
above may affect the PHY parameter in other QAM channels
as described in docsIfMCmtsEqamGroupDependencyTable
or rejected with error 'wrongValue' based on the constrains
indicated by the EQAM capabilities
docsIfMCmtsEqamDownstreamCapabilitiesTable of
DOCS-If-M-CMTS-MIB.
This object contains information that is used to signal
'lock' PHY parameters to other entities via interfaces such
as DEPI and ERMI.
docsIfMCmtsEqamDownstreamDevicePhyParamLock OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates if by design the QAM Channel is directly configurable. This BIT set is derived from the dependency group a QAM channel belongs where docsIfMCmtsEqamGroupDependencyType is equal to docsPHYParamFixValue When a specific BIT is set to '1', the PHY parameter in docsIfMCmtsDepiSessionConfigTable is locked for SNMP SETs, returning 'notWritable' on SET attempts. When a specific BIT is set to '0', the PHY parameter in docsIfMCmtsDepiSessionConfigTable is processed. Note that when a BIT is set to '0' an SNMP SET as described above may affect the PHY parameter in other QAM channels as described in docsIfMCmtsEqamGroupDependencyTable or rejected with error 'wrongValue' based on the constrains indicated by the EQAM capabilities docsIfMCmtsEqamDownstreamCapabilitiesTable of DOCS-If-M-CMTS-MIB. This object contains information that is used to signal 'lock' PHY parameters to other entities via interfaces such as DEPI and ERMI." ::= { docsIfMCmtsEqamDownstreamEntry 3 }
Vendor: Cable Television Laboratories, Inc.
Module: DOCS-IF-M-CMTS-MIB
[Automatically extracted from oidview.com]
docsIfMCmtsEqamDownstreamDevicePhyParamLock OBJECT-TYPE SYNTAX BITS { frequency(0), bandwidth(1), power(2), modulation(3), interleaver(4), j83Annex(5), symbolRate(6), mute(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if by design the QAM Channel is directly configurable. This BIT set is derived from the dependency group a QAM channel belongs where docsIfMCmtsEqamGroupDependencyType is equal to docsPHYParamFixValue When a specific BIT is set to '1', the PHY parameter in docsIfMCmtsDepiSessionConfigTable is locked for SNMP SETs, returning 'notWritable' on SET attempts. When a specific BIT is set to '0', the PHY parameter in docsIfMCmtsDepiSessionConfigTable is processed. Note that when a BIT is set to '0' an SNMP SET as described above may affect the PHY parameter in other QAM channels as described in docsIfMCmtsEqamGroupDependencyTable or rejected with error 'wrongValue' based on the constrains indicated by the EQAM capabilities docsIfMCmtsEqamDownstreamCapabilitiesTable of DOCS-If-M-CMTS-MIB. This object contains information that is used to signal 'lock' PHY parameters to other entities via interfaces such as DEPI and ERMI." ::= { docsIfMCmtsEqamDownstreamEntry 3 }
docsIfMCmtsEqamDownstreamDevicePhyParamLock OBJECT-TYPE SYNTAX BITS { frequency(0), bandwidth(1), power(2), modulation(3), interleaver(4), j83Annex(5), symbolRate(6), mute(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if by design the QAM Channel is directly configurable. This BIT set is derived from the dependency group a QAM channel belongs where docsIfMCmtsEqamGroupDependencyType is equal to docsPHYParamFixValue When a specific BIT is set to '1', the PHY parameter in docsIfMCmtsDepiSessionConfigTable is locked for SNMP SETs, returning 'notWritable' on SET attempts. When a specific BIT is set to '0', the PHY parameter in docsIfMCmtsDepiSessionConfigTable is processed. Note that when a BIT is set to '0' an SNMP SET as described above may affect the PHY parameter in other QAM channels as described in docsIfMCmtsEqamGroupDependencyTable or rejected with error 'wrongValue' based on the constrains indicated by the EQAM capabilities docsIfMCmtsEqamDownstreamCapabilitiesTable of DOCS-If-M-CMTS-MIB. This object contains information that is used to signal 'lock' PHY parameters to other entities via interfaces such as DEPI and ERMI." ::= { docsIfMCmtsEqamDownstreamEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.1 | docsIfMCmtsEqamDownstreamTSID | 0 | 0 | Represents the TSID value for the QAM channel of this M-CMTS Downstream Interface. The value '0' indicates no TSID is being confi… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.2 | docsIfMCmtsEqamDownstreamPhyDependencies | 0 | 0 | The summary of the M-CMTS Downstream Interface dependencies based on the constraints of docsIfMCmtsEqamGroupDependencyEntry. A BIT… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.4 | docsIfMCmtsEqamDownstreamDeviceConfigPhyParamLock | 0 | 0 | Administrative configuration of lock bits for EQAM channels PHY parameters. A BIT set of this object is meaningful when the same … |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.5 | docsIfMCmtsEqamDownstreamAllocationType | 0 | 0 | Indicates the mechanisms authorized to reserve and control this M-CMTS Downstream interface. When configured to 'docsisOnly' indi… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.6 | docsIfMCmtsEqamDownstreamAllocationStatus | 0 | 0 | Indicates the service(s) the M-CMTS Downstream Interface is allocated for. 'other' BIT set to '1' indicates the resource is curre… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.7 | docsIfMCmtsEqamDownstreamAllocationTimeout | 0 | 0 | Indicates the number of seconds the EQAM device waits before advertising the QAM channel resource is idle and/or accepting a sess… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.8 | docsIfMCmtsEqamDownstreamDRRPAdvertizing | 0 | 0 | Indicates when a QAM channel resource should be advertised via DRRP (DOCSIS Resource Registration Protocol) to an Edge Resource M… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.9 | docsIfMCmtsEqamDownstreamUdpPortMapping | 0 | 0 | The UDP Port within a L2TPv3 Session PDU the EQAM uses to map DEPI flows to the EQAM channels associated to this table entry. When… |