The percentage of the maximum output rate for the
aggregated traffic that is being sent though this
M-CMTS Downstream interface to the QAM channel
associated with this DEPI session.
Using a value lower than 100% of the QAM channel
configured payload rate prevents the build up of
a queue delay when MPEG-TS nulls are added in the
presence of jitter in the CIN.
This object is meaningful only to the M-CMTS core.
The EQAM device reports a value 0.
The percentage of the maximum output rate for the
aggregated traffic that is being sent though this
M-CMTS Downstream interface to the QAM channel
associated with this DEPI session.
Using a value lower than 100% of the QAM channel
configured payload rate prevents the build up of
a queue delay when MPEG-TS nulls are added in the
presence of jitter in the CIN.
This object is meaningful only to the M-CMTS core.
The EQAM device reports a value 0.
Parsed from file DOCS-IF-M-CMTS-MIB.my.txt
Company: None
Module: DOCS-IF-M-CMTS-MIB
The percentage of the maximum output rate for the
aggregated traffic that is being sent though this
M-CMTS Downstream interface to the QAM channel
associated with this DEPI session.
Using a value lower than 100% of the QAM channel
configured payload rate prevents the build up of
a queue delay when MPEG-TS nulls are added in the
presence of jitter in the CIN.
This object is meaningful only to the M-CMTS core.
The EQAM device reports a value 0.
docsIfMCmtsDepiSessionConfigChannelOutputRate OBJECT-TYPE SYNTAX Gauge(0..100) ACCESS read-write STATUS mandatory DESCRIPTION "The percentage of the maximum output rate for the aggregated traffic that is being sent though this M-CMTS Downstream interface to the QAM channel associated with this DEPI session. Using a value lower than 100% of the QAM channel configured payload rate prevents the build up of a queue delay when MPEG-TS nulls are added in the presence of jitter in the CIN. This object is meaningful only to the M-CMTS core. The EQAM device reports a value 0." REFERENCE "DEPI M-CMTS Core Output Rate" DEFVAL { 99 } ::= { docsIfMCmtsDepiSessionConfigEntry 23 }
Vendor: Cable Television Laboratories, Inc.
Module: DOCS-IF-M-CMTS-MIB
[Automatically extracted from oidview.com]
docsIfMCmtsDepiSessionConfigChannelOutputRate OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of the maximum output rate for the aggregated traffic that is being sent though this M-CMTS Downstream interface to the QAM channel associated with this DEPI session. Using a value lower than 100% of the QAM channel configured payload rate prevents the build up of a queue delay when MPEG-TS nulls are added in the presence of jitter in the CIN. This object is meaningful only to the M-CMTS core. The EQAM device reports a value 0." REFERENCE "DEPI M-CMTS Core Output Rate" DEFVAL { 99 } ::= { docsIfMCmtsDepiSessionConfigEntry 23 }
docsIfMCmtsDepiSessionConfigChannelOutputRate OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of the maximum output rate for the aggregated traffic that is being sent though this M-CMTS Downstream interface to the QAM channel associated with this DEPI session. Using a value lower than 100% of the QAM channel configured payload rate prevents the build up of a queue delay when MPEG-TS nulls are added in the presence of jitter in the CIN. This object is meaningful only to the M-CMTS core. The EQAM device reports a value 0." REFERENCE "DEPI M-CMTS Core Output Rate" DEFVAL { 99 } ::= { docsIfMCmtsDepiSessionConfigEntry 23 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.1 | docsIfMCmtsDepiSessionConfigIndex | 0 | 0 | The index for entries in this conceptual table. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.2 | docsIfMCmtsDepiSessionConfigCableMacIfIndex | 0 | 0 | Defines the MAC domain (ifType docsCableMaclayer)on which the DEPI Session is being set for an existing M-CMTS Downstream interfa… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.3 | docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex | 0 | 0 | Defines the Downstream channel index on which the DEPI Session is being set. The set of this object is optional. When this object… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.4 | docsIfMCmtsDepiSessionConfigAddrType | 0 | 0 | The type of InetAddress for docsIfMCmtsDepiSessionConfigLocalAddr and docsIfMCmtsDepiSessionConfigRemoteAddr. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.5 | docsIfMCmtsDepiSessionConfigLocalAddr | 0 | 0 | The InetAddress of the local entity the DEPI Session is set. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.6 | docsIfMCmtsDepiSessionConfigRemoteAddr | 0 | 0 | The InetAddress of the remote peer the DEPI Session is set. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.7 | docsIfMCmtsDepiSessionConfigL2TPv3HeaderType | 0 | 0 | Indicates the type of L2TPv3 header being configured for the DEPI session. The value 'ip' means L2TPv3 Header Over IP The value 'u… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.8 | docsIfMCmtsDepiSessionConfigMethod | 0 | 0 | Indicates the DEPI Tunnel mechanism used for the DEPI session. Currently only 'l2tpControl is supported. The value 'other' is use… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.9 | docsIfMCmtsDepiSessionConfigTSID | 0 | 0 | The TSID to be associated to the DEPI Session. TSID is a 16-bit unsigned integer value configured per QAM channel in the EQAM dev… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.10 | docsIfMCmtsDepiSessionConfigDEPIMode | 0 | 0 | The DEPI mode of operation of this entry 'dmpt' indicates DOCSIS MPT mode (D-MPT) 'psp' indicates Packet Streaming Protocol. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.11 | docsIfMCmtsDepiSessionConfigRsrcAllocReq | 0 | 0 | A reference to docsIfMCmtsDepiRsrcAllocIndex of docsIfMCmtsDepiRsrcAllocTable used in the DEPI Session setup by the M-CMTS Core t… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.12 | docsIfMCmtsDepiSessionConfigCinPhbIdPolicy | 0 | 0 | A list of tags to reference CIN PHB policies in docsIfMCmtsDepiPhbPolicyTable for this DEPI session. This object is not meaningfu… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.13 | docsIfMCmtsDepiSessionConfigSyncEnabled | 0 | 0 | Indicates the DOCSIS Sync message handling at the Edge QAM based upon PSP or DMPT mode of operation. In MPT mode 'true' indicates… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.14 | docsIfMCmtsDepiSessionConfigSyncInterval | 0 | 0 | Indicates the time nominal time interval for EQAM to insert DOCSIS Sync messages when operating in PSP mode. In DMPT mode this va… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.15 | docsIfMCmtsDepiSessionConfigPhyParamsFlag | 0 | 0 | When configuring an entry, DOCSIS PHY parameters may be set directly or default values are used to populate the entry. This object… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.16 | docsIfMCmtsDepiSessionConfigChannelFrequency | 0 | 0 | The channel frequency for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifIndex… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.17 | docsIfMCmtsDepiSessionConfigChannelModulation | 0 | 0 | The channel modulation for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifInde… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.18 | docsIfMCmtsDepiSessionConfigChannelInterleave | 0 | 0 | The channel Interleaver for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifInd… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.19 | docsIfMCmtsDepiSessionConfigChannelPower | 0 | 0 | The channel power level for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifInd… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.20 | docsIfMCmtsDepiSessionConfigChannelAnnex | 0 | 0 | The channel J.83 Annex type for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding if… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.21 | docsIfMCmtsDepiSessionConfigChannelSymbolRateM | 0 | 0 | The value M for the estimation of the DS Symbol Rate as (10.24 MHz )*M/N |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.22 | docsIfMCmtsDepiSessionConfigChannelSymbolRateN | 0 | 0 | The value N for the estimation of the DS Symbol Rate as (10.24 MHz )*M/N |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.24 | docsIfMCmtsDepiSessionConfigChannelBurstSize | 0 | 0 | The maximum burst size for the aggregate output rate of this M-CMTS Downstream Interface. The default value of this object corres… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.25 | docsIfMCmtsDepiSessionConfigStorage | 0 | 0 | The storage realization of the entry. No columnar values can be changed if the StorageType of an entry is 'permanent'. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.26 | docsIfMCmtsDepiSessionConfigRowStatus | 0 | 0 | The status of this conceptual table row entry. In order to set an entry to the 'active' status, the MIB objects below must be set… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.27 | docsIfMCmtsDepiSessionConfigChannelId | 0 | 0 | The downstream channel identification of this M-CMTS Downstream interface. During entry creation The M-CMTS Core assigns a Channel… |