The TSID to be associated to the DEPI Session.
TSID is a 16-bit unsigned integer value configured per QAM
channel in the EQAM device and serves as a QAM channel
identifier at several network levels.
When this object is set to 0, at the most the L2TPv3
Control Plane of the DEPI session is established but not
DEPI L2TPv3 Session itself. It means, there might be
the situations where the DEPI Control Plane already exists
e.g., a different DEPI session to same EQAM device. In this
case the new entry will no trigger the DEPI Control Plane
creation. The TSID value zero may accomplish functions
like testing of DEPI Control Plane connectivity without
launching the DEPI Session itself; DLM over a M-CMTS
Core - EQAM devices path with no Active sessions for
administrative purposes.
The TSID to be associated to the DEPI Session.
TSID is a 16-bit unsigned integer value configured per QAM
channel in the EQAM device and serves as a QAM channel
identifier at several network levels.
When this object is set to 0, at the most the L2TPv3
Control Plane of the DEPI session is established but not
DEPI L2TPv3 Session itself. It means, there might be
the situations where the DEPI Control Plane already exists
e.g., a different DEPI session to same EQAM device. In this
case the new entry will no trigger the DEPI Control Plane
creation. The TSID value zero may accomplish functions
like testing of DEPI Control Plane connectivity without
launching the DEPI Session itself; DLM over a M-CMTS
Core - EQAM devices path with no Active sessions for
administrative purposes.
Parsed from file DOCS-IF-M-CMTS-MIB.my.txt
Company: None
Module: DOCS-IF-M-CMTS-MIB
The TSID to be associated to the DEPI Session.
TSID is a 16-bit unsigned integer value configured per QAM
channel in the EQAM device and serves as a QAM channel
identifier at several network levels.
When this object is set to 0, at the most the L2TPv3
Control Plane of the DEPI session is established but not
DEPI L2TPv3 Session itself. It means, there might be
the situations where the DEPI Control Plane already exists
e.g., a different DEPI session to same EQAM device. In this
case the new entry will no trigger the DEPI Control Plane
creation. The TSID value zero may accomplish functions
like testing of DEPI Control Plane connectivity without
launching the DEPI Session itself; DLM over a M-CMTS
Core - EQAM devices path with no Active sessions for
administrative purposes.
docsIfMCmtsDepiSessionConfigTSID OBJECT-TYPE SYNTAX Gauge(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The TSID to be associated to the DEPI Session. TSID is a 16-bit unsigned integer value configured per QAM channel in the EQAM device and serves as a QAM channel identifier at several network levels. When this object is set to 0, at the most the L2TPv3 Control Plane of the DEPI session is established but not DEPI L2TPv3 Session itself. It means, there might be the situations where the DEPI Control Plane already exists e.g., a different DEPI session to same EQAM device. In this case the new entry will no trigger the DEPI Control Plane creation. The TSID value zero may accomplish functions like testing of DEPI Control Plane connectivity without launching the DEPI Session itself; DLM over a M-CMTS Core - EQAM devices path with no Active sessions for administrative purposes." ::= { docsIfMCmtsDepiSessionConfigEntry 9 }
Vendor: Cable Television Laboratories, Inc.
Module: DOCS-IF-M-CMTS-MIB
[Automatically extracted from oidview.com]
docsIfMCmtsDepiSessionConfigTSID OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The TSID to be associated to the DEPI Session. TSID is a 16-bit unsigned integer value configured per QAM channel in the EQAM device and serves as a QAM channel identifier at several network levels. When this object is set to 0, at the most the L2TPv3 Control Plane of the DEPI session is established but not DEPI L2TPv3 Session itself. It means, there might be the situations where the DEPI Control Plane already exists e.g., a different DEPI session to same EQAM device. In this case the new entry will no trigger the DEPI Control Plane creation. The TSID value zero may accomplish functions like testing of DEPI Control Plane connectivity without launching the DEPI Session itself; DLM over a M-CMTS Core - EQAM devices path with no Active sessions for administrative purposes." ::= { docsIfMCmtsDepiSessionConfigEntry 9 }
docsIfMCmtsDepiSessionConfigTSID OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The TSID to be associated to the DEPI Session. TSID is a 16-bit unsigned integer value configured per QAM channel in the EQAM device and serves as a QAM channel identifier at several network levels. When this object is set to 0, at the most the L2TPv3 Control Plane of the DEPI session is established but not DEPI L2TPv3 Session itself. It means, there might be the situations where the DEPI Control Plane already exists e.g., a different DEPI session to same EQAM device. In this case the new entry will no trigger the DEPI Control Plane creation. The TSID value zero may accomplish functions like testing of DEPI Control Plane connectivity without launching the DEPI Session itself; DLM over a M-CMTS Core - EQAM devices path with no Active sessions for administrative purposes." ::= { docsIfMCmtsDepiSessionConfigEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.1 | docsIfMCmtsDepiSessionConfigIndex | 0 | 0 | The index for entries in this conceptual table. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.2 | docsIfMCmtsDepiSessionConfigCableMacIfIndex | 0 | 0 | Defines the MAC domain (ifType docsCableMaclayer)on which the DEPI Session is being set for an existing M-CMTS Downstream interfa… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.3 | docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex | 0 | 0 | Defines the Downstream channel index on which the DEPI Session is being set. The set of this object is optional. When this object… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.4 | docsIfMCmtsDepiSessionConfigAddrType | 0 | 0 | The type of InetAddress for docsIfMCmtsDepiSessionConfigLocalAddr and docsIfMCmtsDepiSessionConfigRemoteAddr. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.5 | docsIfMCmtsDepiSessionConfigLocalAddr | 0 | 0 | The InetAddress of the local entity the DEPI Session is set. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.6 | docsIfMCmtsDepiSessionConfigRemoteAddr | 0 | 0 | The InetAddress of the remote peer the DEPI Session is set. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.7 | docsIfMCmtsDepiSessionConfigL2TPv3HeaderType | 0 | 0 | Indicates the type of L2TPv3 header being configured for the DEPI session. The value 'ip' means L2TPv3 Header Over IP The value 'u… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.8 | docsIfMCmtsDepiSessionConfigMethod | 0 | 0 | Indicates the DEPI Tunnel mechanism used for the DEPI session. Currently only 'l2tpControl is supported. The value 'other' is use… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.10 | docsIfMCmtsDepiSessionConfigDEPIMode | 0 | 0 | The DEPI mode of operation of this entry 'dmpt' indicates DOCSIS MPT mode (D-MPT) 'psp' indicates Packet Streaming Protocol. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.11 | docsIfMCmtsDepiSessionConfigRsrcAllocReq | 0 | 0 | A reference to docsIfMCmtsDepiRsrcAllocIndex of docsIfMCmtsDepiRsrcAllocTable used in the DEPI Session setup by the M-CMTS Core t… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.12 | docsIfMCmtsDepiSessionConfigCinPhbIdPolicy | 0 | 0 | A list of tags to reference CIN PHB policies in docsIfMCmtsDepiPhbPolicyTable for this DEPI session. This object is not meaningfu… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.13 | docsIfMCmtsDepiSessionConfigSyncEnabled | 0 | 0 | Indicates the DOCSIS Sync message handling at the Edge QAM based upon PSP or DMPT mode of operation. In MPT mode 'true' indicates… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.14 | docsIfMCmtsDepiSessionConfigSyncInterval | 0 | 0 | Indicates the time nominal time interval for EQAM to insert DOCSIS Sync messages when operating in PSP mode. In DMPT mode this va… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.15 | docsIfMCmtsDepiSessionConfigPhyParamsFlag | 0 | 0 | When configuring an entry, DOCSIS PHY parameters may be set directly or default values are used to populate the entry. This object… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.16 | docsIfMCmtsDepiSessionConfigChannelFrequency | 0 | 0 | The channel frequency for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifIndex… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.17 | docsIfMCmtsDepiSessionConfigChannelModulation | 0 | 0 | The channel modulation for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifInde… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.18 | docsIfMCmtsDepiSessionConfigChannelInterleave | 0 | 0 | The channel Interleaver for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifInd… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.19 | docsIfMCmtsDepiSessionConfigChannelPower | 0 | 0 | The channel power level for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifInd… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.20 | docsIfMCmtsDepiSessionConfigChannelAnnex | 0 | 0 | The channel J.83 Annex type for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding if… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.21 | docsIfMCmtsDepiSessionConfigChannelSymbolRateM | 0 | 0 | The value M for the estimation of the DS Symbol Rate as (10.24 MHz )*M/N |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.22 | docsIfMCmtsDepiSessionConfigChannelSymbolRateN | 0 | 0 | The value N for the estimation of the DS Symbol Rate as (10.24 MHz )*M/N |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.23 | docsIfMCmtsDepiSessionConfigChannelOutputRate | 0 | 0 | The percentage of the maximum output rate for the aggregated traffic that is being sent though this M-CMTS Downstream interface t… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.24 | docsIfMCmtsDepiSessionConfigChannelBurstSize | 0 | 0 | The maximum burst size for the aggregate output rate of this M-CMTS Downstream Interface. The default value of this object corres… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.25 | docsIfMCmtsDepiSessionConfigStorage | 0 | 0 | The storage realization of the entry. No columnar values can be changed if the StorageType of an entry is 'permanent'. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.26 | docsIfMCmtsDepiSessionConfigRowStatus | 0 | 0 | The status of this conceptual table row entry. In order to set an entry to the 'active' status, the MIB objects below must be set… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.27 | docsIfMCmtsDepiSessionConfigChannelId | 0 | 0 | The downstream channel identification of this M-CMTS Downstream interface. During entry creation The M-CMTS Core assigns a Channel… |