The status of this conceptual table row entry.
In order to set an entry to the 'active' status,
the MIB objects below must be set to proper values:
Other objects default values are used for the DEPI session
docsIfMCmtsDepiSessionConfigCableMacIfIndex
docsIfMCmtsDepiSessionConfigRemoteAddr
docsIfMCmtsDepiSessionConfigTSID
docsIfMCmtsDepiSessionConfigDEPIMode
docsIfMCmtsDepiSessionConfigRsrcAllocReq
docsIfMCmtsDepiSessionConfigMethod
docsIfMCmtsDepiSessionConfigPhyFlag
docsIfMCmtsDepiSessionConfigChannelId must be unique within
the MAC sublayer domain in order to set this entry to
active,
PHY parameters listed below are not required to be
populated in this table, then default values are used to
populate the entry or implementation may opt to not
instantiate those objects.
docsIfMCmtsDepiSessionConfigChannelFrequency
docsIfMCmtsDepiSessionConfigChannelModulation
docsIfMCmtsDepiSessionConfigChannelInterleave
docsIfMCmtsDepiSessionConfigChannelPower
docsIfMCmtsDepiSessionConfigChannelAnnex
docsIfMCmtsDepiSessionConfigSyncInterval
When the row entry is 'active' the DEPI tunnel control
and/or the DEPI session is established. Retries and
timeouts are proper of the DEPI Tunnel protocol used.
For L2TPv3 while the entry is active the M-CMTS must
continue to set the DEPI session and log the respective
errors for unsuccessful operations.
Relationship with the IfTable ifAdminStatus
Setting ifAdminStatus from ifTable to the interface pointed
by this entry
(docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex) to
'down' sets this entry Row Status to 'notInService'. A set
to ifAdminStatus to 'up' while in 'down' state sets back
the Row Status to 'active'.
The opposite is not true: a set to this object to 'active'
when previously 'notInService' and while ifAdmiStatus is
'down' returns an error 'inconsistentValue', such only one
point of contact is needed to enable and disable the
interface.
Setting this object to 'notInService' while ifAdminStatus is
'down' sets ifOperStatus to 'down'.
Setting this entry to 'notInService' will tear down the
DEPI session. DEPI Tunnel Control teardown in the absence
of sessions is Tunnel protocol dependent, e.g., for L2TPv3
Control Connections may use tunnel Idle Timeout objects
defined in L2TP-MIB.
Due to the dependencies of IfAdminStatus and this table row
Status, M-CMTS Core and EQAM devices MUST not age out
entries with Row Status 'notInService' and
docsIfMCmtsDepiSessionInfoState in
'ifAdmiStatusSetToDown'.
The status of this conceptual table row entry.
In order to set an entry to the 'active' status,
the MIB objects below must be set to proper values:
Other objects default values are used for the DEPI session
docsIfMCmtsDepiSessionConfigCableMacIfIndex
docsIfMCmtsDepiSessionConfigRemoteAddr
docsIfMCmtsDepiSessionConfigTSID
docsIfMCmtsDepiSessionConfigDEPIMode
docsIfMCmtsDepiSessionConfigRsrcAllocReq
docsIfMCmtsDepiSessionConfigMethod
docsIfMCmtsDepiSessionConfigPhyFlag
docsIfMCmtsDepiSessionConfigChannelId must be unique within
the MAC sublayer domain in order to set this entry to
active,
PHY parameters listed below are not required to be
populated in this table, then default values are used to
populate the entry or implementation may opt to not
instantiate those objects.
docsIfMCmtsDepiSessionConfigChannelFrequency
docsIfMCmtsDepiSessionConfigChannelModulation
docsIfMCmtsDepiSessionConfigChannelInterleave
docsIfMCmtsDepiSessionConfigChannelPower
docsIfMCmtsDepiSessionConfigChannelAnnex
docsIfMCmtsDepiSessionConfigSyncInterval
When the row entry is 'active' the DEPI tunnel control
and/or the DEPI session is established. Retries and
timeouts are proper of the DEPI Tunnel protocol used.
For L2TPv3 while the entry is active the M-CMTS must
continue to set the DEPI session and log the respective
errors for unsuccessful operations.
Relationship with the IfTable ifAdminStatus
Setting ifAdminStatus from ifTable to the interface pointed
by this entry
(docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex) to
'down' sets this entry Row Status to 'notInService'. A set
to ifAdminStatus to 'up' while in 'down' state sets back
the Row Status to 'active'.
The opposite is not true: a set to this object to 'active'
when previously 'notInService' and while ifAdmiStatus is
'down' returns an error 'inconsistentValue', such only one
point of contact is needed to enable and disable the
interface.
Setting this object to 'notInService' while ifAdminStatus is
'down' sets ifOperStatus to 'down'.
Setting this entry to 'notInService' will tear down the
DEPI session. DEPI Tunnel Control teardown in the absence
of sessions is Tunnel protocol dependent, e.g., for L2TPv3
Control Connections may use tunnel Idle Timeout objects
defined in L2TP-MIB.
Due to the dependencies of IfAdminStatus and this table row
Status, M-CMTS Core and EQAM devices MUST not age out
entries with Row Status 'notInService' and
docsIfMCmtsDepiSessionInfoState in
'ifAdmiStatusSetToDown'.
Parsed from file DOCS-IF-M-CMTS-MIB.my.txt
Company: None
Module: DOCS-IF-M-CMTS-MIB
The status of this conceptual table row entry.
In order to set an entry to the 'active' status,
the MIB objects below must be set to proper values:
Other objects default values are used for the DEPI session
docsIfMCmtsDepiSessionConfigCableMacIfIndex
docsIfMCmtsDepiSessionConfigRemoteAddr
docsIfMCmtsDepiSessionConfigTSID
docsIfMCmtsDepiSessionConfigDEPIMode
docsIfMCmtsDepiSessionConfigRsrcAllocReq
docsIfMCmtsDepiSessionConfigMethod
docsIfMCmtsDepiSessionConfigPhyFlag
docsIfMCmtsDepiSessionConfigChannelId must be unique within
the MAC sublayer domain in order to set this entry to
active,
PHY parameters listed below are not required to be
populated in this table, then default values are used to
populate the entry or implementation may opt to not
instantiate those objects.
docsIfMCmtsDepiSessionConfigChannelFrequency
docsIfMCmtsDepiSessionConfigChannelModulation
docsIfMCmtsDepiSessionConfigChannelInterleave
docsIfMCmtsDepiSessionConfigChannelPower
docsIfMCmtsDepiSessionConfigChannelAnnex
docsIfMCmtsDepiSessionConfigSyncInterval
When the row entry is 'active' the DEPI tunnel control
and/or the DEPI session is established. Retries and
timeouts are proper of the DEPI Tunnel protocol used.
For L2TPv3 while the entry is active the M-CMTS must
continue to set the DEPI session and log the respective
errors for unsuccessful operations.
Relationship with the IfTable ifAdminStatus
Setting ifAdminStatus from ifTable to the interface pointed
by this entry
(docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex) to
'down' sets this entry Row Status to 'notInService'. A set
to ifAdminStatus to 'up' while in 'down' state sets back
the Row Status to 'active'.
The opposite is not true: a set to this object to 'active'
when previously 'notInService' and while ifAdmiStatus is
'down' returns an error 'inconsistentValue', such only one
point of contact is needed to enable and disable the
interface.
Setting this object to 'notInService' while ifAdminStatus is
'down' sets ifOperStatus to 'down'.
Setting this entry to 'notInService' will tear down the
DEPI session. DEPI Tunnel Control teardown in the absence
of sessions is Tunnel protocol dependent, e.g., for L2TPv3
Control Connections may use tunnel Idle Timeout objects
defined in L2TP-MIB.
Due to the dependencies of IfAdminStatus and this table row
Status, M-CMTS Core and EQAM devices MUST not age out
entries with Row Status 'notInService' and
docsIfMCmtsDepiSessionInfoState in
'ifAdmiStatusSetToDown'.
docsIfMCmtsDepiSessionConfigRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of this conceptual table row entry. In order to set an entry to the 'active' status, the MIB objects below must be set to proper values: Other objects default values are used for the DEPI session docsIfMCmtsDepiSessionConfigCableMacIfIndex docsIfMCmtsDepiSessionConfigRemoteAddr docsIfMCmtsDepiSessionConfigTSID docsIfMCmtsDepiSessionConfigDEPIMode docsIfMCmtsDepiSessionConfigRsrcAllocReq docsIfMCmtsDepiSessionConfigMethod docsIfMCmtsDepiSessionConfigPhyFlag docsIfMCmtsDepiSessionConfigChannelId must be unique within the MAC sublayer domain in order to set this entry to active, PHY parameters listed below are not required to be populated in this table, then default values are used to populate the entry or implementation may opt to not instantiate those objects. docsIfMCmtsDepiSessionConfigChannelFrequency docsIfMCmtsDepiSessionConfigChannelModulation docsIfMCmtsDepiSessionConfigChannelInterleave docsIfMCmtsDepiSessionConfigChannelPower docsIfMCmtsDepiSessionConfigChannelAnnex docsIfMCmtsDepiSessionConfigSyncInterval When the row entry is 'active' the DEPI tunnel control and/or the DEPI session is established. Retries and timeouts are proper of the DEPI Tunnel protocol used. For L2TPv3 while the entry is active the M-CMTS must continue to set the DEPI session and log the respective errors for unsuccessful operations. Relationship with the IfTable ifAdminStatus Setting ifAdminStatus from ifTable to the interface pointed by this entry (docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex) to 'down' sets this entry Row Status to 'notInService'. A set to ifAdminStatus to 'up' while in 'down' state sets back the Row Status to 'active'. The opposite is not true: a set to this object to 'active' when previously 'notInService' and while ifAdmiStatus is 'down' returns an error 'inconsistentValue', such only one point of contact is needed to enable and disable the interface. Setting this object to 'notInService' while ifAdminStatus is 'down' sets ifOperStatus to 'down'. Setting this entry to 'notInService' will tear down the DEPI session. DEPI Tunnel Control teardown in the absence of sessions is Tunnel protocol dependent, e.g., for L2TPv3 Control Connections may use tunnel Idle Timeout objects defined in L2TP-MIB. Due to the dependencies of IfAdminStatus and this table row Status, M-CMTS Core and EQAM devices MUST not age out entries with Row Status 'notInService' and docsIfMCmtsDepiSessionInfoState in 'ifAdmiStatusSetToDown'." ::= { docsIfMCmtsDepiSessionConfigEntry 26 }
Vendor: Cable Television Laboratories, Inc.
Module: DOCS-IF-M-CMTS-MIB
[Automatically extracted from oidview.com]
docsIfMCmtsDepiSessionConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual table row entry. In order to set an entry to the 'active' status, the MIB objects below must be set to proper values: Other objects default values are used for the DEPI session docsIfMCmtsDepiSessionConfigCableMacIfIndex docsIfMCmtsDepiSessionConfigRemoteAddr docsIfMCmtsDepiSessionConfigTSID docsIfMCmtsDepiSessionConfigDEPIMode docsIfMCmtsDepiSessionConfigRsrcAllocReq docsIfMCmtsDepiSessionConfigMethod docsIfMCmtsDepiSessionConfigPhyFlag docsIfMCmtsDepiSessionConfigChannelId must be unique within the MAC sublayer domain in order to set this entry to active, PHY parameters listed below are not required to be populated in this table, then default values are used to populate the entry or implementation may opt to not instantiate those objects. docsIfMCmtsDepiSessionConfigChannelFrequency docsIfMCmtsDepiSessionConfigChannelModulation docsIfMCmtsDepiSessionConfigChannelInterleave docsIfMCmtsDepiSessionConfigChannelPower docsIfMCmtsDepiSessionConfigChannelAnnex docsIfMCmtsDepiSessionConfigSyncInterval When the row entry is 'active' the DEPI tunnel control and/or the DEPI session is established. Retries and timeouts are proper of the DEPI Tunnel protocol used. For L2TPv3 while the entry is active the M-CMTS must continue to set the DEPI session and log the respective errors for unsuccessful operations. Relationship with the IfTable ifAdminStatus Setting ifAdminStatus from ifTable to the interface pointed by this entry (docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex) to 'down' sets this entry Row Status to 'notInService'. A set to ifAdminStatus to 'up' while in 'down' state sets back the Row Status to 'active'. The opposite is not true: a set to this object to 'active' when previously 'notInService' and while ifAdmiStatus is 'down' returns an error 'inconsistentValue', such only one point of contact is needed to enable and disable the interface. Setting this object to 'notInService' while ifAdminStatus is 'down' sets ifOperStatus to 'down'. Setting this entry to 'notInService' will tear down the DEPI session. DEPI Tunnel Control teardown in the absence of sessions is Tunnel protocol dependent, e.g., for L2TPv3 Control Connections may use tunnel Idle Timeout objects defined in L2TP-MIB. Due to the dependencies of IfAdminStatus and this table row Status, M-CMTS Core and EQAM devices MUST not age out entries with Row Status 'notInService' and docsIfMCmtsDepiSessionInfoState in 'ifAdmiStatusSetToDown'." ::= { docsIfMCmtsDepiSessionConfigEntry 26 }
docsIfMCmtsDepiSessionConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual table row entry. In order to set an entry to the 'active' status, the MIB objects below must be set to proper values: Other objects default values are used for the DEPI session docsIfMCmtsDepiSessionConfigCableMacIfIndex docsIfMCmtsDepiSessionConfigRemoteAddr docsIfMCmtsDepiSessionConfigTSID docsIfMCmtsDepiSessionConfigDEPIMode docsIfMCmtsDepiSessionConfigRsrcAllocReq docsIfMCmtsDepiSessionConfigMethod docsIfMCmtsDepiSessionConfigPhyFlag docsIfMCmtsDepiSessionConfigChannelId must be unique within the MAC sublayer domain in order to set this entry to active, PHY parameters listed below are not required to be populated in this table, then default values are used to populate the entry or implementation may opt to not instantiate those objects. docsIfMCmtsDepiSessionConfigChannelFrequency docsIfMCmtsDepiSessionConfigChannelModulation docsIfMCmtsDepiSessionConfigChannelInterleave docsIfMCmtsDepiSessionConfigChannelPower docsIfMCmtsDepiSessionConfigChannelAnnex docsIfMCmtsDepiSessionConfigSyncInterval When the row entry is 'active' the DEPI tunnel control and/or the DEPI session is established. Retries and timeouts are proper of the DEPI Tunnel protocol used. For L2TPv3 while the entry is active the M-CMTS must continue to set the DEPI session and log the respective errors for unsuccessful operations. Relationship with the IfTable ifAdminStatus Setting ifAdminStatus from ifTable to the interface pointed by this entry (docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex) to 'down' sets this entry Row Status to 'notInService'. A set to ifAdminStatus to 'up' while in 'down' state sets back the Row Status to 'active'. The opposite is not true: a set to this object to 'active' when previously 'notInService' and while ifAdmiStatus is 'down' returns an error 'inconsistentValue', such only one point of contact is needed to enable and disable the interface. Setting this object to 'notInService' while ifAdminStatus is 'down' sets ifOperStatus to 'down'. Setting this entry to 'notInService' will tear down the DEPI session. DEPI Tunnel Control teardown in the absence of sessions is Tunnel protocol dependent, e.g., for L2TPv3 Control Connections may use tunnel Idle Timeout objects defined in L2TP-MIB. Due to the dependencies of IfAdminStatus and this table row Status, M-CMTS Core and EQAM devices MUST not age out entries with Row Status 'notInService' and docsIfMCmtsDepiSessionInfoState in 'ifAdmiStatusSetToDown'." ::= { docsIfMCmtsDepiSessionConfigEntry 26 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.1 | docsIfMCmtsDepiSessionConfigIndex | 0 | 0 | The index for entries in this conceptual table. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.2 | docsIfMCmtsDepiSessionConfigCableMacIfIndex | 0 | 0 | Defines the MAC domain (ifType docsCableMaclayer)on which the DEPI Session is being set for an existing M-CMTS Downstream interfa… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.3 | docsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex | 0 | 0 | Defines the Downstream channel index on which the DEPI Session is being set. The set of this object is optional. When this object… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.4 | docsIfMCmtsDepiSessionConfigAddrType | 0 | 0 | The type of InetAddress for docsIfMCmtsDepiSessionConfigLocalAddr and docsIfMCmtsDepiSessionConfigRemoteAddr. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.5 | docsIfMCmtsDepiSessionConfigLocalAddr | 0 | 0 | The InetAddress of the local entity the DEPI Session is set. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.6 | docsIfMCmtsDepiSessionConfigRemoteAddr | 0 | 0 | The InetAddress of the remote peer the DEPI Session is set. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.7 | docsIfMCmtsDepiSessionConfigL2TPv3HeaderType | 0 | 0 | Indicates the type of L2TPv3 header being configured for the DEPI session. The value 'ip' means L2TPv3 Header Over IP The value 'u… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.8 | docsIfMCmtsDepiSessionConfigMethod | 0 | 0 | Indicates the DEPI Tunnel mechanism used for the DEPI session. Currently only 'l2tpControl is supported. The value 'other' is use… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.9 | docsIfMCmtsDepiSessionConfigTSID | 0 | 0 | The TSID to be associated to the DEPI Session. TSID is a 16-bit unsigned integer value configured per QAM channel in the EQAM dev… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.10 | docsIfMCmtsDepiSessionConfigDEPIMode | 0 | 0 | The DEPI mode of operation of this entry 'dmpt' indicates DOCSIS MPT mode (D-MPT) 'psp' indicates Packet Streaming Protocol. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.11 | docsIfMCmtsDepiSessionConfigRsrcAllocReq | 0 | 0 | A reference to docsIfMCmtsDepiRsrcAllocIndex of docsIfMCmtsDepiRsrcAllocTable used in the DEPI Session setup by the M-CMTS Core t… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.12 | docsIfMCmtsDepiSessionConfigCinPhbIdPolicy | 0 | 0 | A list of tags to reference CIN PHB policies in docsIfMCmtsDepiPhbPolicyTable for this DEPI session. This object is not meaningfu… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.13 | docsIfMCmtsDepiSessionConfigSyncEnabled | 0 | 0 | Indicates the DOCSIS Sync message handling at the Edge QAM based upon PSP or DMPT mode of operation. In MPT mode 'true' indicates… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.14 | docsIfMCmtsDepiSessionConfigSyncInterval | 0 | 0 | Indicates the time nominal time interval for EQAM to insert DOCSIS Sync messages when operating in PSP mode. In DMPT mode this va… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.15 | docsIfMCmtsDepiSessionConfigPhyParamsFlag | 0 | 0 | When configuring an entry, DOCSIS PHY parameters may be set directly or default values are used to populate the entry. This object… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.16 | docsIfMCmtsDepiSessionConfigChannelFrequency | 0 | 0 | The channel frequency for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifIndex… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.17 | docsIfMCmtsDepiSessionConfigChannelModulation | 0 | 0 | The channel modulation for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifInde… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.18 | docsIfMCmtsDepiSessionConfigChannelInterleave | 0 | 0 | The channel Interleaver for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifInd… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.19 | docsIfMCmtsDepiSessionConfigChannelPower | 0 | 0 | The channel power level for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifInd… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.20 | docsIfMCmtsDepiSessionConfigChannelAnnex | 0 | 0 | The channel J.83 Annex type for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding if… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.21 | docsIfMCmtsDepiSessionConfigChannelSymbolRateM | 0 | 0 | The value M for the estimation of the DS Symbol Rate as (10.24 MHz )*M/N |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.22 | docsIfMCmtsDepiSessionConfigChannelSymbolRateN | 0 | 0 | The value N for the estimation of the DS Symbol Rate as (10.24 MHz )*M/N |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.23 | docsIfMCmtsDepiSessionConfigChannelOutputRate | 0 | 0 | The percentage of the maximum output rate for the aggregated traffic that is being sent though this M-CMTS Downstream interface t… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.24 | docsIfMCmtsDepiSessionConfigChannelBurstSize | 0 | 0 | The maximum burst size for the aggregate output rate of this M-CMTS Downstream Interface. The default value of this object corres… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.25 | docsIfMCmtsDepiSessionConfigStorage | 0 | 0 | The storage realization of the entry. No columnar values can be changed if the StorageType of an entry is 'permanent'. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.27 | docsIfMCmtsDepiSessionConfigChannelId | 0 | 0 | The downstream channel identification of this M-CMTS Downstream interface. During entry creation The M-CMTS Core assigns a Channel… |