This object identifies the default administrative port type,
to be used in conjunction with the operational port type
denoted by agentPortType.
The set of possible values for this object is
the same as the set defined for the agentPortType
object.
This object represents the administratively-configured type of
the MAU. If auto-negotiation is not enabled or is not
implemented for this MAU, the value of this object determines
the operational type of the MAU. In this case, a set to this
object will force the MAU into the specified operating mode.
If auto-negotiation is implemented and enabled for this MAU,
the operational type of the MAU is determined by auto-negotiation,
and the value of this object denotes the type to which the MAU
will automatically revert if/when auto-negotiation is later disabled.
The valid values for this object are:
dot3MauType10BaseTHD
dot3MauType10BaseTFD
dot3MauType100BaseTXHD
dot3MauType100BaseTXFD
dot3MauType100BaseFXFD
dot3MauType10GBaseSX
Parsed from file NETGEAR-SWITCHING-MIB.mib
Module: NETGEAR-SWITCHING-MIB
Vendor: Netgear
Module: NETGEAR-SWITCHING-MIB
[Automatically extracted from oidview.com]
agentPortDefaultType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the default administrative port type, to be used in conjunction with the operational port type denoted by agentPortType. The set of possible values for this object is the same as the set defined for the agentPortType object. This object represents the administratively-configured type of the MAU. If auto-negotiation is not enabled or is not implemented for this MAU, the value of this object determines the operational type of the MAU. In this case, a set to this object will force the MAU into the specified operating mode. If auto-negotiation is implemented and enabled for this MAU, the operational type of the MAU is determined by auto-negotiation, and the value of this object denotes the type to which the MAU will automatically revert if/when auto-negotiation is later disabled. The valid values for this object are: dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType10GBaseSX" REFERENCE "RFC 2668" ::= { agentPortConfigEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.10.1.2.13.1.1 | agentPortDot1dBasePort | 0 | 0 | The port number of this port. |
| 1.3.6.1.4.1.4526.10.1.2.13.1.2 | agentPortIfIndex | 0 | 0 | The switch's Port IfIndex |
| 1.3.6.1.4.1.4526.10.1.2.13.1.3 | agentPortIanaType | 0 | 0 | The switch's Port Type |
| 1.3.6.1.4.1.4526.10.1.2.13.1.4 | agentPortSTPMode | 0 | 0 | The switch's Port Spanning Tree Protocol Mode STP mode values are: dot1d (the default) fast, indicates you want to use the fast sp… |
| 1.3.6.1.4.1.4526.10.1.2.13.1.5 | agentPortSTPState | 0 | 0 | The switch's Port Spanning Tree Protocol State. This object is only supported when the Dot1d Protocol is enabled. |
| 1.3.6.1.4.1.4526.10.1.2.13.1.6 | agentPortAdminMode | 0 | 0 | The switch's Port Admin Mode |
| 1.3.6.1.4.1.4526.10.1.2.13.1.7 | agentPortPhysicalMode | 0 | 0 | The switch's Port Speed Mode. This is the configured physical mode. This object is read-only for gigabit ports |
| 1.3.6.1.4.1.4526.10.1.2.13.1.8 | agentPortPhysicalStatus | 0 | 0 | The switch's Port Physical Speed Status. This is the current actual speed. |
| 1.3.6.1.4.1.4526.10.1.2.13.1.9 | agentPortLinkTrapMode | 0 | 0 | If enabled, link up and link down traps will be sent for this port. |
| 1.3.6.1.4.1.4526.10.1.2.13.1.10 | agentPortClearStats | 0 | 0 | clear stats for this port only |
| 1.3.6.1.4.1.4526.10.1.2.13.1.12 | agentPortType | 0 | 0 | None |
| 1.3.6.1.4.1.4526.10.1.2.13.1.13 | agentPortAutoNegAdminStatus | 0 | 0 | This object identifies the administration status of auto negotiation for this port. |
| 1.3.6.1.4.1.4526.10.1.2.13.1.14 | agentPortDot3FlowControlMode | 0 | 0 | Config flowcontrol allows you to enable or disable 802.3x flow control for this port. This value applies to only full-duplex mode… |
| 1.3.6.1.4.1.4526.10.1.2.13.1.15 | agentPortDVlanTagMode | 0 | 0 | Controls the Double Vlan Tag mode on this port. |
| 1.3.6.1.4.1.4526.10.1.2.13.1.16 | agentPortDVlanTagEthertype | 0 | 0 | Configures the Double Vlan Tag Ethertype for this port. If this object is supported, ethertype cannot be configured globally for … |
| 1.3.6.1.4.1.4526.10.1.2.13.1.17 | agentPortDVlanTagCustomerId | 0 | 0 | Configures the Customer ID for the Double Vlan Tag for this port. |
| 1.3.6.1.4.1.4526.10.1.2.13.1.18 | agentPortMaxFrameSizeLimit | 0 | 0 | This object identifies the largest value that can be configured for agentPortMaxFrameSize |
| 1.3.6.1.4.1.4526.10.1.2.13.1.19 | agentPortMaxFrameSize | 0 | 0 | This object identifies the currently configured maximum frame size value for this port. The maximmum value that this object can … |