Configures the Double Vlan Tag Ethertype for this port.
If this object is supported, ethertype cannot be configured
globally for the switch.
Commonly used are the Ethertypes for vman tags (34984, or 0x88A8)
and dot1q tags (33024, or 0x8100).
Parsed from file NETGEAR-SWITCHING-MIB.mib
Module: NETGEAR-SWITCHING-MIB
Vendor: Netgear
Module: NETGEAR-SWITCHING-MIB
[Automatically extracted from oidview.com]
agentPortDVlanTagEthertype OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the Double Vlan Tag Ethertype for this port. If this object is supported, ethertype cannot be configured globally for the switch. Commonly used are the Ethertypes for vman tags (34984, or 0x88A8) and dot1q tags (33024, or 0x8100)." ::= { agentPortConfigEntry 16 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.10.1.2.13.1.1 | agentPortDot1dBasePort | 0 | 0 | The port number of this port. |
| 1.3.6.1.4.1.4526.10.1.2.13.1.2 | agentPortIfIndex | 0 | 0 | The switch's Port IfIndex |
| 1.3.6.1.4.1.4526.10.1.2.13.1.3 | agentPortIanaType | 0 | 0 | The switch's Port Type |
| 1.3.6.1.4.1.4526.10.1.2.13.1.4 | agentPortSTPMode | 0 | 0 | The switch's Port Spanning Tree Protocol Mode STP mode values are: dot1d (the default) fast, indicates you want to use the fast sp… |
| 1.3.6.1.4.1.4526.10.1.2.13.1.5 | agentPortSTPState | 0 | 0 | The switch's Port Spanning Tree Protocol State. This object is only supported when the Dot1d Protocol is enabled. |
| 1.3.6.1.4.1.4526.10.1.2.13.1.6 | agentPortAdminMode | 0 | 0 | The switch's Port Admin Mode |
| 1.3.6.1.4.1.4526.10.1.2.13.1.7 | agentPortPhysicalMode | 0 | 0 | The switch's Port Speed Mode. This is the configured physical mode. This object is read-only for gigabit ports |
| 1.3.6.1.4.1.4526.10.1.2.13.1.8 | agentPortPhysicalStatus | 0 | 0 | The switch's Port Physical Speed Status. This is the current actual speed. |
| 1.3.6.1.4.1.4526.10.1.2.13.1.9 | agentPortLinkTrapMode | 0 | 0 | If enabled, link up and link down traps will be sent for this port. |
| 1.3.6.1.4.1.4526.10.1.2.13.1.10 | agentPortClearStats | 0 | 0 | clear stats for this port only |
| 1.3.6.1.4.1.4526.10.1.2.13.1.11 | agentPortDefaultType | 0 | 0 | This object identifies the default administrative port type, to be used in conjunction with the operational port type denoted by … |
| 1.3.6.1.4.1.4526.10.1.2.13.1.12 | agentPortType | 0 | 0 | None |
| 1.3.6.1.4.1.4526.10.1.2.13.1.13 | agentPortAutoNegAdminStatus | 0 | 0 | This object identifies the administration status of auto negotiation for this port. |
| 1.3.6.1.4.1.4526.10.1.2.13.1.14 | agentPortDot3FlowControlMode | 0 | 0 | Config flowcontrol allows you to enable or disable 802.3x flow control for this port. This value applies to only full-duplex mode… |
| 1.3.6.1.4.1.4526.10.1.2.13.1.15 | agentPortDVlanTagMode | 0 | 0 | Controls the Double Vlan Tag mode on this port. |
| 1.3.6.1.4.1.4526.10.1.2.13.1.17 | agentPortDVlanTagCustomerId | 0 | 0 | Configures the Customer ID for the Double Vlan Tag for this port. |
| 1.3.6.1.4.1.4526.10.1.2.13.1.18 | agentPortMaxFrameSizeLimit | 0 | 0 | This object identifies the largest value that can be configured for agentPortMaxFrameSize |
| 1.3.6.1.4.1.4526.10.1.2.13.1.19 | agentPortMaxFrameSize | 0 | 0 | This object identifies the currently configured maximum frame size value for this port. The maximmum value that this object can … |