The switch's Port Admin Mode
Parsed from file NETGEAR-SWITCHING-MIB.mib
Module: NETGEAR-SWITCHING-MIB
Vendor: Netgear
Module: NETGEAR-SWITCHING-MIB
[Automatically extracted from oidview.com]
agentPortAdminMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The switch's Port Admin Mode" ::= { agentPortConfigEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.10.1.2.13.1.1 | agentPortDot1dBasePort | 0 | 0 | The port number of this port. |
| 1.3.6.1.4.1.4526.10.1.2.13.1.2 | agentPortIfIndex | 0 | 0 | The switch's Port IfIndex |
| 1.3.6.1.4.1.4526.10.1.2.13.1.3 | agentPortIanaType | 0 | 0 | The switch's Port Type |
| 1.3.6.1.4.1.4526.10.1.2.13.1.4 | agentPortSTPMode | 0 | 0 | The switch's Port Spanning Tree Protocol Mode STP mode values are: dot1d (the default) fast, indicates you want to use the fast sp… |
| 1.3.6.1.4.1.4526.10.1.2.13.1.5 | agentPortSTPState | 0 | 0 | The switch's Port Spanning Tree Protocol State. This object is only supported when the Dot1d Protocol is enabled. |
| 1.3.6.1.4.1.4526.10.1.2.13.1.7 | agentPortPhysicalMode | 0 | 0 | The switch's Port Speed Mode. This is the configured physical mode. This object is read-only for gigabit ports |
| 1.3.6.1.4.1.4526.10.1.2.13.1.8 | agentPortPhysicalStatus | 0 | 0 | The switch's Port Physical Speed Status. This is the current actual speed. |
| 1.3.6.1.4.1.4526.10.1.2.13.1.9 | agentPortLinkTrapMode | 0 | 0 | If enabled, link up and link down traps will be sent for this port. |
| 1.3.6.1.4.1.4526.10.1.2.13.1.10 | agentPortClearStats | 0 | 0 | clear stats for this port only |
| 1.3.6.1.4.1.4526.10.1.2.13.1.11 | agentPortDefaultType | 0 | 0 | This object identifies the default administrative port type, to be used in conjunction with the operational port type denoted by … |
| 1.3.6.1.4.1.4526.10.1.2.13.1.12 | agentPortType | 0 | 0 | None |
| 1.3.6.1.4.1.4526.10.1.2.13.1.13 | agentPortAutoNegAdminStatus | 0 | 0 | This object identifies the administration status of auto negotiation for this port. |
| 1.3.6.1.4.1.4526.10.1.2.13.1.14 | agentPortDot3FlowControlMode | 0 | 0 | Config flowcontrol allows you to enable or disable 802.3x flow control for this port. This value applies to only full-duplex mode… |
| 1.3.6.1.4.1.4526.10.1.2.13.1.15 | agentPortDVlanTagMode | 0 | 0 | Controls the Double Vlan Tag mode on this port. |
| 1.3.6.1.4.1.4526.10.1.2.13.1.16 | agentPortDVlanTagEthertype | 0 | 0 | Configures the Double Vlan Tag Ethertype for this port. If this object is supported, ethertype cannot be configured globally for … |
| 1.3.6.1.4.1.4526.10.1.2.13.1.17 | agentPortDVlanTagCustomerId | 0 | 0 | Configures the Customer ID for the Double Vlan Tag for this port. |
| 1.3.6.1.4.1.4526.10.1.2.13.1.18 | agentPortMaxFrameSizeLimit | 0 | 0 | This object identifies the largest value that can be configured for agentPortMaxFrameSize |
| 1.3.6.1.4.1.4526.10.1.2.13.1.19 | agentPortMaxFrameSize | 0 | 0 | This object identifies the currently configured maximum frame size value for this port. The maximmum value that this object can … |