Vendor: Sync Research, Inc.
Module: MFRAP-MIB
[Automatically extracted from oidview.com]
mfrapCfgFrPerf OBJECT IDENTIFIER ::= { mfrapConfiguration 7 }
mfrapCfgFrPerf OBJECT IDENTIFIER ::= { mfrapConfiguration 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.8.2.7.1 | mfrapCfgFrPerfDlciNamesTable | 1 | 7 | This table allows the user to configure DLCI specific parameters such as Names, CIR, and EIR. Additionally, any DLCIs configured … |
| 1.3.6.1.4.1.485.8.2.7.2 | mfrapCfgFrPerfDlciNamesDelete | 1 | 1 | Setting this object with a specific DLCI value will remove the DLCI from the DLCI-specific parameters database. |
| 1.3.6.1.4.1.485.8.2.7.3 | mfrapCfgFrPerfTimers | 2 | 4 | mfrapCfgFrPerftimers |
| 1.3.6.1.4.1.485.8.2.7.4 | mfrapCfgFrPerfUserProtocolsTable | 1 | 3 | This table allows the user to select TCP/UDP ports for statistics collection. Tx and Rx byte counts will collected on the specif… |
| 1.3.6.1.4.1.485.8.2.7.5 | mfrapCfgFrPerfLTDlciFilterTable | 1 | 3 | Long term statistics can only be collected on a limited number of DLCIs. The value of SysLTFNumDlcis defines the maximum number o… |
| 1.3.6.1.4.1.485.8.2.7.6 | mfrapCfgFrPerfLTProtocolFilterTable | 1 | 3 | Long term statistics can only be collected on a limited number of protocols. The maximum number of Long Term Protoocls are define… |
| 1.3.6.1.4.1.485.8.2.7.7 | mfrapCfgFrPerfDlciDefaultUtilThreshold | 1 | 1 | The default threshold for generating a utilization threshold trap as a percentage of the CIR. This value is used for mfrapCfgFrPer… |
| 1.3.6.1.4.1.485.8.2.7.8 | mfrapCfgFrPerfDlciUtilDuration | 1 | 1 | The number of Short Term Intervals that a DLCI's utilization as a percentage of CIR must be above or below the value of mfrapCfgFr… |
| 1.3.6.1.4.1.485.8.2.7.9 | mfrapCfgFrPerfDlciNamesTableClear | 1 | 1 | Clears the smperCfgFrPerfDlciNamesTable (1) clear the table or (2) clear the table but don't remove the dlcis from the short term … |
| 1.3.6.1.4.1.485.8.2.7.10 | mfrapCfgFrPerfUserProtocolsTableClear | 1 | 1 | Clears the mfrapCfgFrPerfUserProtocolsTable (1) clear the table |
| 1.3.6.1.4.1.485.8.2.7.11 | mfrapCfgFrPerfLTDlciFilterTableClear | 1 | 1 | Clears the mfrapCfgFrPerfLTDlciFilterTable (1) clear the table |
| 1.3.6.1.4.1.485.8.2.7.12 | mfrapCfgFrPerfLTProtocolFilterTableClear | 1 | 1 | Clears the mfrapCfgFrPerfLTProtocolFilterTable (1) clear the table |
| 1.3.6.1.4.1.485.8.2.7.13 | mfrapCfgFrPerfUnprovDlcisDelete | 1 | 1 | Delete all unprovisioned and Not-In-LMI dlcis (1) delete all unprovisioned |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.8.2.1 | mfrapCfgMgmtTable | 5 | 73 | None |
| 1.3.6.1.4.1.485.8.2.2 | mfrapCfgAppTable | 6 | 12 | None |
| 1.3.6.1.4.1.485.8.2.3 | mfrapCfgT1Table | 5 | 10 | None |
| 1.3.6.1.4.1.485.8.2.4 | mfrapCfgDteTable | 19 | 38 | None |
| 1.3.6.1.4.1.485.8.2.5 | mfrapCfgFrTable | 9 | 18 | None |
| 1.3.6.1.4.1.485.8.2.6 | mfrapCfgVnipTable | 8 | 23 | None |
| 1.3.6.1.4.1.485.8.2.8 | mfrapCfgSecurityTable | 8 | 16 | None |
| 1.3.6.1.4.1.485.8.2.10 | mfrapCfgConnectionTable | 2 | 26 | None |
| 1.3.6.1.4.1.485.8.2.11 | mfrapCfgDandiTable | 2 | 4 | None |
| 1.3.6.1.4.1.485.8.2.12 | mfrapCfgLock | 1 | 1 | Request to start configuration download and lock out any other means of configuring the unit. The integer passed in represents th… |
| 1.3.6.1.4.1.485.8.2.13 | mfrapCfgLockID | 1 | 1 | Returns the IP Address of the management station currently in control of configuration. A unit that is not in a configuration lo… |
| 1.3.6.1.4.1.485.8.2.14 | mfrapCfgID | 1 | 1 | A read of this object returns the Current Configuration ID string. A write sets the Configuration ID string. The string contains… |
| 1.3.6.1.4.1.485.8.2.15 | mfrapCfgStatus | 1 | 1 | The status of a configuration install is reported here. On startup, a status of success will be reported. (1) The configuration h… |
| 1.3.6.1.4.1.485.8.2.16 | mfrapCfgUnlock | 1 | 1 | The management station sets this variable to complete the configuration install process. Un-lock (1) notifies the agent to remove… |
| 1.3.6.1.4.1.485.8.2.17 | mfrapCfgUpdate | 1 | 1 | The management station sets this variable to complete the configuration install process. Update (1) notifies the agent to start t… |