Vendor: Sync Research, Inc.
Module: MFRAP-MIB
[Automatically extracted from oidview.com]
mfrapCfgDteTable OBJECT IDENTIFIER ::= { mfrapConfiguration 4 }
mfrapCfgDteTable OBJECT IDENTIFIER ::= { mfrapConfiguration 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.8.2.4.1 | mfrapCfgDteIntfType | 1 | 1 | mfrapCfgDteIntftype |
| 1.3.6.1.4.1.485.8.2.4.2 | mfrapCfgDteDataMode | 1 | 1 | Inverts the DTE data for transfer across the WAN. Can make some applications, particularly HDLC-based protocols, meet density req… |
| 1.3.6.1.4.1.485.8.2.4.3 | mfrapCfgDteClockMode | 1 | 1 | This selection controls how the unit internally latches the transmit data from the DTE. Normal will sample data with the rising e… |
| 1.3.6.1.4.1.485.8.2.4.4 | mfrapCfgDteTiming | 1 | 1 | Serial DTE Transmit Timing mode. Loop-1 (1) uses the clock returned from the DTE (TT/TCE) to sample tx data, Loop-2 (2) uses the … |
| 1.3.6.1.4.1.485.8.2.4.5 | mfrapCfgDteLineRate | 1 | 1 | Serial DTE Data Rate in bits per second. Valid rates depend upon channel density selection: nX56K for bit-7-stuffing, and nX64K f… |
| 1.3.6.1.4.1.485.8.2.4.6 | mfrapCfgDteChannelDensity | 1 | 1 | Packing of serial data into T1 DS0's. Bit-7-stuff supports DTE rates of nX56Kb/s (from 56K to 1344K) and provides sufficient ones… |
| 1.3.6.1.4.1.485.8.2.4.7 | mfrapCfgDteStartDs0 | 1 | 1 | T1 WAN includes 24 DS0's available for user data. Each DS0 carries either 56Kbit/sec (bit-7-stuffing) or 64KBit/sec (clear-channe… |
| 1.3.6.1.4.1.485.8.2.4.8 | mfrapCfgDteConnStatus | 1 | 1 | The current status of the WAN to DTE mappings. (1) connections valid and DS0s allocated to DTE data. (4) no connections configure… |
| 1.3.6.1.4.1.485.8.2.4.9 | mfrapCfgDteConnStartDs0 | 1 | 1 | T1 WAN includes 24 DS0's available for user data. Each DS0 carries either 56Kbit/sec (bit-7-stuffing) or 64KBit/sec (clear-channe… |
| 1.3.6.1.4.1.485.8.2.4.10 | mfrapCfgDteConnRate | 1 | 1 | Serial DTE Data Rate in bits per second. Valid rates depend upon channel density selection: nX56K for bit-7-stuffing, and nX64K f… |
| 1.3.6.1.4.1.485.8.2.4.11 | mfrapCfgDteConnDensity | 1 | 1 | Packing of serial data into T1 DS0's. Bit-7-stuff supports DTE rates of nX56Kb/s (from 56K to 1344K) and provides sufficient ones… |
| 1.3.6.1.4.1.485.8.2.4.12 | mfrapCfgDteConnDs0Required | 1 | 1 | The number of DS0s required by the node's DTE port. This is based upon the DTE data rate and channel density selections. |
| 1.3.6.1.4.1.485.8.2.4.13 | mfrapCfgDteConnAutoStatus | 1 | 1 | There's a tight correlation among DTE data rate, starting DS0, and channel density. This read-only parameter reports the status o… |
| 1.3.6.1.4.1.485.8.2.4.14 | mfrapCfgDteConnAutoUpdate | 1 | 1 | Updates the connection-critical parameters: line rate, channel density and starting ds0; drops the currect connection; and initia… |
| 1.3.6.1.4.1.485.8.2.4.15 | mfrapCfgDteRts | 1 | 1 | Selects whether the RTS signal is external-from-dte (2) or internal-held-active (1). |
| 1.3.6.1.4.1.485.8.2.4.16 | mfrapCfgDteDtr | 1 | 1 | Selects whether the DTR signal is external-from-dte (2) or internal-held-active (1). |
| 1.3.6.1.4.1.485.8.2.4.18 | mfrapCfgDteDcdOutput | 1 | 1 | Specifies the behavior of this control signal generated by the M-FRAP towards the DTE. inactive-always (1) - signal is permanentl… |
| 1.3.6.1.4.1.485.8.2.4.19 | mfrapCfgDteDsrOutput | 1 | 1 | Specifies the behavior of this control signal generated by the M-FRAP towards the DTE. inactive-always (1) - signal is permanentl… |
| 1.3.6.1.4.1.485.8.2.4.20 | mfrapCfgDteCtsOutput | 1 | 1 | Specifies the behavior of this control signal generated by the M-FRAP towards the DTE. inactive-always (1) - signal is permanentl… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.8.2.1 | mfrapCfgMgmtTable | 5 | 73 | None |
| 1.3.6.1.4.1.485.8.2.2 | mfrapCfgAppTable | 6 | 12 | None |
| 1.3.6.1.4.1.485.8.2.3 | mfrapCfgT1Table | 5 | 10 | None |
| 1.3.6.1.4.1.485.8.2.5 | mfrapCfgFrTable | 9 | 18 | None |
| 1.3.6.1.4.1.485.8.2.6 | mfrapCfgVnipTable | 8 | 23 | None |
| 1.3.6.1.4.1.485.8.2.7 | mfrapCfgFrPerf | 13 | 41 | None |
| 1.3.6.1.4.1.485.8.2.8 | mfrapCfgSecurityTable | 8 | 16 | None |
| 1.3.6.1.4.1.485.8.2.10 | mfrapCfgConnectionTable | 2 | 26 | None |
| 1.3.6.1.4.1.485.8.2.11 | mfrapCfgDandiTable | 2 | 4 | None |
| 1.3.6.1.4.1.485.8.2.12 | mfrapCfgLock | 1 | 1 | Request to start configuration download and lock out any other means of configuring the unit. The integer passed in represents th… |
| 1.3.6.1.4.1.485.8.2.13 | mfrapCfgLockID | 1 | 1 | Returns the IP Address of the management station currently in control of configuration. A unit that is not in a configuration lo… |
| 1.3.6.1.4.1.485.8.2.14 | mfrapCfgID | 1 | 1 | A read of this object returns the Current Configuration ID string. A write sets the Configuration ID string. The string contains… |
| 1.3.6.1.4.1.485.8.2.15 | mfrapCfgStatus | 1 | 1 | The status of a configuration install is reported here. On startup, a status of success will be reported. (1) The configuration h… |
| 1.3.6.1.4.1.485.8.2.16 | mfrapCfgUnlock | 1 | 1 | The management station sets this variable to complete the configuration install process. Un-lock (1) notifies the agent to remove… |
| 1.3.6.1.4.1.485.8.2.17 | mfrapCfgUpdate | 1 | 1 | The management station sets this variable to complete the configuration install process. Update (1) notifies the agent to start t… |