Sets the brightness on the camera, from 20 to 180 (20 is low, 180 is high).
Parsed from file netbotz2.mib.txt
Company: netbotz
Module: NETBOTZ-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
netBotz-prd-bot-camera-brightness OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Sets the brightness on the camera, from 20 to 180 (20 is low, 180 is high)." REFERENCE "NetBotz Camera Brightness" ::= { netBotz-prd-bot 160 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5528.30.10.160.0 | netBotz-prd-bot-camera-brightness | 0 | 0 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.5528.30.10.110 | netBotz-prd-bot-amptotal-total-amp-seconds | 1 | 1 | The accumulated total of amp-seconds on the total of all AmpDetects. |
| 1.3.6.1.4.1.5528.30.10.111 | netBotz-prd-bot-amptotal-total-amp-seconds-since-time | 1 | 1 | The UTC time (seconds since 1/1/1970) of the beginning of the accumulated total of amp-seconds for all AmpDetects. Writing a val… |
| 1.3.6.1.4.1.5528.30.10.112 | netBotz-prd-bot-ext-dry1 | 1 | 1 | The current value of the external dry contact sensor on Ext1: 0=Open, 1=Closed, -1=N/A |
| 1.3.6.1.4.1.5528.30.10.113 | netBotz-prd-bot-ext-dry2 | 1 | 1 | The current value of the external dry contact sensor on Ext2: 0=Open, 1=Closed, -1=N/A |
| 1.3.6.1.4.1.5528.30.10.114 | netBotz-prd-bot-ext-dry3 | 1 | 1 | The current value of the external dry contact sensor on Ext3: 0=Open, 1=Closed, -1=N/A |
| 1.3.6.1.4.1.5528.30.10.115 | netBotz-prd-bot-ext-dry4 | 1 | 1 | The current value of the external dry contact sensor on Ext4: 0=Open, 1=Closed, -1=N/A |
| 1.3.6.1.4.1.5528.30.10.116 | netBotz-prd-bot-ext-dry1-alarm-value | 1 | 1 | The value to generate alarms on for the external dry contact sensor on Ext1: 0=Open, 1=Closed |
| 1.3.6.1.4.1.5528.30.10.117 | netBotz-prd-bot-ext-dry1-enabled | 1 | 1 | External dry contact sensor on Ext1 alarm enabled(1) or disabled(0). |
| 1.3.6.1.4.1.5528.30.10.118 | netBotz-prd-bot-ext-dry2-alarm-value | 1 | 1 | The value to generate alarms on for the external dry contact sensor on Ext2: 0=Open, 1=Closed |
| 1.3.6.1.4.1.5528.30.10.119 | netBotz-prd-bot-ext-dry2-enabled | 1 | 1 | External dry contact sensor on Ext2 alarm enabled(1) or disabled(0). |
| 1.3.6.1.4.1.5528.30.10.120 | netBotz-prd-bot-ext-dry3-alarm-value | 1 | 1 | The value to generate alarms on for the external dry contact sensor on Ext3: 0=Open, 1=Closed |
| 1.3.6.1.4.1.5528.30.10.121 | netBotz-prd-bot-ext-dry3-enabled | 1 | 1 | External dry contact sensor on Ext3 alarm enabled(1) or disabled(0). |
| 1.3.6.1.4.1.5528.30.10.122 | netBotz-prd-bot-ext-dry4-alarm-value | 1 | 1 | The value to generate alarms on for the external dry contact sensor on Ext4: 0=Open, 1=Closed |
| 1.3.6.1.4.1.5528.30.10.123 | netBotz-prd-bot-ext-dry4-enabled | 1 | 1 | External dry contact sensor on Ext4 alarm enabled(1) or disabled(0). |
| 1.3.6.1.4.1.5528.30.10.124 | netBotz-prd-bot-ext-dry1-label | 1 | 1 | The sensor name/label for the dry contact sensor on Ext1 |
| 1.3.6.1.4.1.5528.30.10.125 | netBotz-prd-bot-ext-dry1-open-label | 1 | 1 | The sensor name/label for the open(0) state for the dry contact sensor on Ext1 |
| 1.3.6.1.4.1.5528.30.10.126 | netBotz-prd-bot-ext-dry1-closed-label | 1 | 1 | The sensor name/label for the closed(0) state for the dry contact sensor on Ext1 |
| 1.3.6.1.4.1.5528.30.10.127 | netBotz-prd-bot-ext-dry1-open-to-close-millis | 1 | 1 | The minimum number of milliseconds that the dry contact sensor on Ext1 must read closed before the state is changed from open to… |
| 1.3.6.1.4.1.5528.30.10.128 | netBotz-prd-bot-ext-dry1-close-to-open-millis | 1 | 1 | The minimum number of milliseconds that the dry contact sensor on Ext1 must read openbefore the state is changed from closed to … |
| 1.3.6.1.4.1.5528.30.10.129 | netBotz-prd-bot-ext-dry1-response | 1 | 1 | The type of alert response for the dry contact sensor on Ext1: ALERT=e-mail with no pictures, CAMERA=e-mail with pictures from c… |
| 1.3.6.1.4.1.5528.30.10.130 | netBotz-prd-bot-ext-dry2-label | 1 | 1 | The sensor name/label for the dry contact sensor on Ext2 |
| 1.3.6.1.4.1.5528.30.10.131 | netBotz-prd-bot-ext-dry2-open-label | 1 | 1 | The sensor name/label for the open(0) state for the dry contact sensor on Ext2 |
| 1.3.6.1.4.1.5528.30.10.132 | netBotz-prd-bot-ext-dry2-closed-label | 1 | 1 | The sensor name/label for the closed(0) state for the dry contact sensor on Ext2 |
| 1.3.6.1.4.1.5528.30.10.133 | netBotz-prd-bot-ext-dry2-open-to-close-millis | 1 | 1 | The minimum number of milliseconds that the dry contact sensor on Ext2 must read closed before the state is changed from open to… |
| 1.3.6.1.4.1.5528.30.10.134 | netBotz-prd-bot-ext-dry2-close-to-open-millis | 1 | 1 | The minimum number of milliseconds that the dry contact sensor on Ext2 must read openbefore the state is changed from closed to … |
| 1.3.6.1.4.1.5528.30.10.135 | netBotz-prd-bot-ext-dry2-response | 1 | 1 | The type of alert response for the dry contact sensor on Ext2: ALERT=e-mail with no pictures, CAMERA=e-mail with pictures from c… |
| 1.3.6.1.4.1.5528.30.10.136 | netBotz-prd-bot-ext-dry3-label | 1 | 1 | The sensor name/label for the dry contact sensor on Ext3 |
| 1.3.6.1.4.1.5528.30.10.137 | netBotz-prd-bot-ext-dry3-open-label | 1 | 1 | The sensor name/label for the open(0) state for the dry contact sensor on Ext3 |
| 1.3.6.1.4.1.5528.30.10.138 | netBotz-prd-bot-ext-dry3-closed-label | 1 | 1 | The sensor name/label for the closed(0) state for the dry contact sensor on Ext3 |
| 1.3.6.1.4.1.5528.30.10.139 | netBotz-prd-bot-ext-dry3-open-to-close-millis | 1 | 1 | The minimum number of milliseconds that the dry contact sensor on Ext3 must read closed before the state is changed from open to… |
| 1.3.6.1.4.1.5528.30.10.140 | netBotz-prd-bot-ext-dry3-close-to-open-millis | 1 | 1 | The minimum number of milliseconds that the dry contact sensor on Ext3 must read openbefore the state is changed from closed to … |
| 1.3.6.1.4.1.5528.30.10.141 | netBotz-prd-bot-ext-dry3-response | 1 | 1 | The type of alert response for the dry contact sensor on Ext3: ALERT=e-mail with no pictures, CAMERA=e-mail with pictures from c… |
| 1.3.6.1.4.1.5528.30.10.142 | netBotz-prd-bot-ext-dry4-label | 1 | 1 | The sensor name/label for the dry contact sensor on Ext4 |
| 1.3.6.1.4.1.5528.30.10.143 | netBotz-prd-bot-ext-dry4-open-label | 1 | 1 | The sensor name/label for the open(0) state for the dry contact sensor on Ext4 |
| 1.3.6.1.4.1.5528.30.10.144 | netBotz-prd-bot-ext-dry4-closed-label | 1 | 1 | The sensor name/label for the closed(0) state for the dry contact sensor on Ext4 |
| 1.3.6.1.4.1.5528.30.10.145 | netBotz-prd-bot-ext-dry4-open-to-close-millis | 1 | 1 | The minimum number of milliseconds that the dry contact sensor on Ext4 must read closed before the state is changed from open to… |
| 1.3.6.1.4.1.5528.30.10.146 | netBotz-prd-bot-ext-dry4-close-to-open-millis | 1 | 1 | The minimum number of milliseconds that the dry contact sensor on Ext4 must read openbefore the state is changed from closed to … |
| 1.3.6.1.4.1.5528.30.10.147 | netBotz-prd-bot-ext-dry4-response | 1 | 1 | The type of alert response for the dry contact sensor on Ext4: ALERT=e-mail with no pictures, CAMERA=e-mail with pictures from c… |
| 1.3.6.1.4.1.5528.30.10.148 | netBotz-prd-bot-cam-motion | 1 | 1 | The current motion reading for the camera motion sensor (0=none, 1=motion detected) |
| 1.3.6.1.4.1.5528.30.10.149 | netBotz-prd-bot-cam-motion-enabled | 1 | 1 | Camera motion sensor alarm enabled(1) or disabled(0). |
| 1.3.6.1.4.1.5528.30.10.150 | netBotz-prd-bot-cam-motion-sensitivity | 1 | 1 | Camera motion sensor sensitivity: 1=max, 15=min, 0=disabled. |
| 1.3.6.1.4.1.5528.30.10.151 | netBotz-prd-bot-cam-motion-delay | 1 | 1 | Camera motion sensor delay. This is the minimum number of milliseconds of detected motion required before the alarm is triggere… |
| 1.3.6.1.4.1.5528.30.10.152 | netBotz-prd-bot-camera-event-autocycle | 1 | 1 | Enables (1) or disables (0) the option to have the camera-based responses to alarm conditions automatically cycle as long as the… |
| 1.3.6.1.4.1.5528.30.10.153 | netBotz-prd-bot-num-pix-before-alarm | 1 | 1 | Controls the number of pictures to be captured before any triggered alarm. |
| 1.3.6.1.4.1.5528.30.10.154 | netBotz-prd-bot-delay-before-event-pix | 1 | 1 | Controls the number of milliseconds before the first picture is captured after any triggered alarm. |
| 1.3.6.1.4.1.5528.30.10.155 | netBotz-prd-bot-delay-between-event-pix | 1 | 1 | Controls the number of milliseconds between pictures captured after any triggered alarm. |
| 1.3.6.1.4.1.5528.30.10.156 | netBotz-prd-bot-cam-motion-area-of-motion | 1 | 1 | Camera motion sensor area of motion: 1=max, 15=min, 0=disabled. |
| 1.3.6.1.4.1.5528.30.10.157 | netBotz-prd-bot-cam-pix-for-duration-of-alerts | 1 | 1 | Camera images gathered for duration of camera related alert: 0=no, 1=yes. |
| 1.3.6.1.4.1.5528.30.10.158 | netBotz-prd-bot-camera-enabled | 1 | 1 | Controls whether the camera is enabled or not: 0=no, 1=yes. Changing this will reboot the appliance. |
| 1.3.6.1.4.1.5528.30.10.159 | netBotz-prd-bot-camera-is-flipped | 1 | 1 | Controls whether the camera image is flipped 180 degress or not: 0=no, 1=yes. Changing this will reboot the appliance. |
| ... | ||||